Photoluminescence measurements on undoped CdZnTe grown by the high-pressure bridgman method

The low temperature photoluminescence of Cd_0.91Zn_0.09Te grown by the high-pressure Bridgman (HPB) method exhibits a neutral donor bound exciton emission (D⁰X) at 1.65603 eV with its excited state (D⁰X^*) at 1.65798 eV and neutral acceptor bound exciton emissions (A⁰X) at 1.64566 eV and 1.65201 eV. Assuming a direct generation and subsequent relaxation of excitons at the D⁰X^* state, we demonstrate that the temporal evolution of the above emission bands is well reproduced by a set of rate equations. The resultant radiative-lifetime of 1.4 ns for the D⁰X and 1.5 and 2.0 ns for the A⁰Xs are compared with various CdZnTe's (CZTs) grown by the other methods to demonstrate the particular nature of the HPB CZT.     

新型解复用接收器件：理论分析与实验研究

本文对一镜斜置三镜腔光电探测器进行理论分析及实验验证。一镜斜置三镜腔结构是一种新型高性能的光电探测器结构,斜境使滤波波腔与吸收腔之间解耦,因此这种结构的探测器可以同时获得高的量子效率、高的响应效率和窄的光谱响应线宽。本文在理论分析的基础上,利用分立光学器件对斜镜的解耦作用进行了实验验证。     

注入锁定光纤环形腔激光器实验研究

利用注入锁定技术,将中心频率稳定、窄线宽的DFBLD作为主激光器,将光纤环形腔激光器作为从激光器。在实现注入锁定后,利用光纤环形腔谐振特性,在效压窄了注入光线宽。得到了中心频率稳定,较之DFBLD线宽更窄的输出激光,目前线宽已被压窄到70kHz。     

CdTe/CdMnTe多量子阱的生长和激子复合动力学性质的研究

用分子束外延在GaAs衬底上生长了CdTe/Cd0.8Mn0.2Te多量子 结构,利用X射线衍射（XRD）、低激发密度下的PL光谱和变密度激发的ps时间分辨光谱研究了CdTe/CdMnTe多量子阱的结构和激子复合特性。在变密度激发的ps时间分辨光谱中,发现不同激发密度下发光衰减时间不同,认为它的机理可能是无辐射复合引起的。     

立方相InGaN的稳态和瞬态光学特性研究

用光荧光和时间分辨光谱技术研究了MEB生长立方In     

量子点太阳电池的探索

阐述了探索量子点太阳电池的重要意义与物理构想,简要介绍了两种不同结构组态的量子点太阳电池的光伏性能,如p-i-n量子点太阳电池和量子点敏化太阳电池.对发生在各种量子点(PbSe、PbS、PbTe、CdSe和Si)中的因碰撞电离而导致的多激子产生效应及其研究进展进行了重点评述,并提出了设计与制作量子点太阳电池的若干技术对策.可以预期,具有超高能量转换效率、低制作成本与高可靠性的量子点太阳电池的实现,有可能对未来的光伏技术与产业产生革命性的影响.     

小球表面粗糙度和温度对石榴石多晶铁氧体铁磁共振线宽的影响

用普通陶瓷工艺制备小线宽石榴石多晶铁氧体材料,用压缩空气吹磨法和研磨膏研磨法对石榴石小球表面进行了抛光,按GB9633(等同采用IEC60556)标准)在9.37GHz下测量了小线宽石榴石铁氧体材料的铁磁共振线宽ΔH。讨论了ΔH与抛光粉粒度的关系,比较了压缩空气法与研磨法的抛光效果。在7?30℃环境温度区间,测量了小线宽材料的ΔH随温度的变化。     

Two-dimensional simulation and modeling in scanning electron microscope imaging and metrology research

Traditional Monte Carlo modeling of the electron beam-specimen interactions in a scanning electron microscope (SEM) produces information about electron beam penetration and output signal generation at either a single beam-landing location, or multiple landing positions. If the multiple landings lie on a line, the results can be graphed in a line scan-like format. Monte Carlo results formatted as line scans have proven useful in providing one-dimensional information about the sample (e.g., linewidth). When used this way, this process is called forward line scan modeling. In the present work, the concept of image simulation (or the first step in the inverse modeling of images) is introduced where the forward-modeled line scan data are carried one step further to construct theoretical two-dimensional (2-D) micrographs (i.e., theoretical SEM images) for comparison with similar experimentally obtained micrographs. This provides an ability to mimic and closely match theory and experiment using SEM images. Calculated and/or measured libraries of simulated images can be developed with this technique. The library concept will prove to be very useful in the determination of dimensional and other properties of simple structures, such as integrated circuit parts, where the shape of the features is preferably measured from a single top-down image or a line scan. This paper presents one approach to the generation of 2-D simulated images and presents some suggestions as to their application to critical dimension metrology.     

光脉冲在非啁啾光纤光栅中的透射传输研究

基于均匀布拉格光纤光栅的色散特性,阐述了激光啁啾脉冲的传输演变特性,研究了工作于传输方式的非啁啾光纤光栅的透射传输特性.讨论了光源线宽、光栅长度、光栅耦合系数等光栅参数以及初始脉宽、初始啁啾等参量对补偿光纤长度的影响,通过理论计算和模拟实验研究光栅对脉冲的补偿能力.     

改进的16进制正交幅度调制码的相位估计算法

相干光通信系统中的相位恢复是克服信号收发端和传输过程中产生的相位噪声的必要步骤。为获得低的运算复杂度和良好的相位估计效果,本文对传统的四次方相位估计算法进行了改进,使之具有自适应的数据块长度控制功能。通过理论分析以及Matlab数值仿真方法验证改进的效果。对于16进制正交幅度调制码（16QAM）,改进后的算法在几乎不增...