Scale‐up and Spouting of Two‐Dimensional Beds

The objective of this paper is to present an analysis on the scale‐up procedure of two‐dimensional spouted beds. The task was carried out with three different beds measuring 0.15, 0.30 and 0.80 in width. The conditions of scale‐up were studied through geometrical similitude analysis. Some parameters of scale were adimensionalised, tested and validated in order to propose relationships capable of predicting values of dependent properties. Those relationships should be followed in a prototype of an equipment of industrial scale. The study permitted the development of correlations to predict values of maximum pressure drop, minimum spout velocity and maximum height of spouting.     

A Simple Experimental Technique to Measure Tortuosity in Packed Beds

In this article, a simple and inexpensive experimental technique easy to build in laboratory, for the measurement of tortuosity of a packed bed of inert particles, is described. Experimental values of the tortuosity were obtained with four different packed beds of sand. The experimental results obtained are in good agreement with the theoretical values of tortuosity in a porous media; and the data reported showed the tortuosity to increase with decrease in the void fraction of the packed bed as expected.     

一种简易的手工网印序号工艺法

通过一种简易的手工丝印序号工艺法,可以连续完成逐张PCB的序号印制且质量稳定。     

基于CH365型接口和MCX314As型运动控制器的PCI总线运动控制卡设计

以CH365型PCI总线接口和MCX314As型运动控制器为核心硬件,自主研发了基于运动控制器的PCI总线运动控制卡,该控制卡能够实现4轴位置、速度和S曲线的加减速控制,具有直线、圆弧、位模式插补功能及自动原位搜寻功能,同时具有4路信号输入和8路通用输出.     

Design development of a static sunshade using small scale modeling technique

The rising global demand for energy has triggered emphasis on conservation of energy. Buildings are one of the important energy consuming sectors. Passive solar architecture encompasses a wide range of strategies and options resulting in energy efficient building design and increased occupant's comfort. Passive solar design, aiming at increasing direct solar gains during winter period and to avoid overheating during summer period should make use of specific shading devices over energy efficient window. The static sunshades are most effective for solar control inside the buildings.Countries like India have composite climate, which can be classified under summer, winter and rainy season. Depending on the seasonal requirements, this paper introduces a new geometry of a static sunshade, designed by calculating the sun angles for the two dates. The static sun shading design methodology is validated with the help of small scale modeling experimentation technique, carried out in Pilani, Rajasthan (India). Although insulating materials can be used as a part of a building structure, its feasibility should be checked before particular application. In the present paper, the two small-scale experimental models of actual construction material with varying static sunshades, i.e. horizontal and the proposed one have been constructed and analyzed with the models of insulating material (Polyurethane Foam [PUF]). Depending upon the solar intersection over south facade wall, sunlit area and shaded area have been correlated with temperature inside the models to decide the effectiveness of the proposed sunshade.     

冶金烧结强化盘式钻头齿圈的试验研究

在分析盘式钻头齿圈失效机理的基础上,提出了齿圈表面堆焊耐磨合金强化和镶嵌硬质合金齿圈强化两种方法。通过试验研究和对比分析,确定了采用冶金混合烧结固齿法镶嵌硬质合金齿圈强化盘式钻头。进一步的试验研究表明:采用冶金混合烧结固齿法镶嵌硬质合金齿圈来强化盘式钻头齿圈,其结合情况非常好;硬质合金齿圈的硬度、耐磨料磨损的能力和耐冲击磨料磨损的能力在烧结后都有进一步的提高,说明采用冶金混合烧结固齿法镶嵌硬质合金齿圈来强化盘式钻头齿圈是可行的。     

高校实验材料的计算机化管理

主要阐述了高校实验材料实行计算机化管理的必要性及全面介绍了自行开发设计的高校实验材料计算机管理系统．     

北京核电站模拟器硬件的功能和特点

本文介绍北京核电站模拟器硬件构成并分析其功能和特点。     

常用浆种在纤维中底板抄造中的应用分析

本文介绍了常用几种浆板在纤维中底板中的应用。     

板式薄层膜通道中压力行为的实验研究

对层流状态下膜分离装置内膜通道中压力行为的特性进行了研究，理论分析了膜通道中出现该压力行为的原因，并用根式膜进行了验证．实验结果证实了理论分析的正确性。