中小型企业网络存在问题及对策

当代社会已是网络的时代,计算机网络为企业发展带来了便利,同时也带来问题与挑战.随着企业网络规模的扩大,网络出现的问题变得多样而棘手.本文介绍了如何做好、做优中小型企业网络组建与管理,通过网络规划、管理维护等流程分析,按照VLAN划分、故障分析、网络安全等方面阐述中小型企业网络存在问题及对策.     

Model falsification using set‐valued observers for a class of discrete‐time dynamic systems: a coprime factorization approach

This article introduces a new method for model falsification using set‐valued observers, which can be applied to a class of discrete linear time‐invariant dynamic systems with time‐varying model uncertainties. In comparison with previous results, the main advantages of this approach are as follows: The computation of the convex hull of the set‐valued estimates of the state can be avoided under certain circumstances; to guarantee convergence of the set‐valued estimates of the state, the required number of previous steps is at most as large as the number of states of the nominal plant; and it provides a straightforward nonconservative method to falsify uncertain models of dynamic systems, including open‐loop unstable plants. The results obtained are illustrated in simulation, emphasizing the advantages and shortcomings of the suggested method. Copyright © 2013 John Wiley & Sons, Ltd.     

Asynchronous fault detection filter design approach for discrete‐time switched linear systems

This paper is concerned with the problem of the fault detection filter design for discrete‐time switched linear systems with average dwell‐time. The designed fault detection filters are also switched systems, which are assumed to be asynchronously switched with the original switched systems. Improved results on the weighted l₂ performance and the H _? performance are first given, and the multiple Lyaounov‐like functions during matched period and unmatched period for the running time of one subsystem are used. By the aid of multiple Lyapunov‐like functions combined with Projection Lemma, the FD filters are designed such that the augmented systems under asynchronous switching are exponentially stable, and the residual signal generated by the filters achieves the weighted l₂‐gain for disturbances and guarantees the H _? performance for faults. Sufficient conditions are formulated by linear matrix inequalities, and the filter gains are characterized in terms of the solution of a convex optimization problem. Finally, examples are provided to demonstrate the effectiveness of the proposed design method. Copyright © 2012 John Wiley & Sons, Ltd.     

Invariant‐set‐based fault diagnosis in Lure systems

In this paper, we present an invariant‐set‐based method for actuator and sensor fault detection and isolation in Lure systems. The Lure plant is controlled by an observer‐based feedback tracking controller, designed for the nominal (fault‐free) system. Suitable residual signals are constructed from measurable system outputs and estimates associated with the nominal observer. Faults are diagnosed by online contrasting the residual signal trajectories against sets of values that the residuals are shown to attain under healthy or faulty operation. These values are obtained via set‐invariance analysis of the system closed‐loop trajectories. Copyright © 2013 John Wiley & Sons, Ltd.     

烧结生产线电气故障处理方法探讨

根据烧结生产线上电气故障发生的不同地方和不同类型,探讨运用不同的故障处理方法,以提高及时发现和迅速排除生产线上电气故障效率。     

脂肪酶产生菌的筛选及其耐甲醇驯化的研究

从土样中分离出34株脂肪酶产生菌,在维多利亚蓝培养基上初筛出透明圈与菌落直径比值较大的6株菌,复筛出产脂肪酶活性较高的菌株FM-1,其所产脂肪酶主要为胞内酶,产脂肪酶活力为132 U/g cell。通过反复的驯化培养方式将菌株FM-1驯化成耐甲醇的优良菌株。在甲醇质量浓度为11 mg/L的培养基中驯化后的脂肪酶相对活力为35%,而出发菌株在此环境中不能生长。     

一种基于粗集理论的车地无线通信设备故障诊断方法*

针对车地无线通信设备故障诊断信息不一致的情况下进行故障的推理和诊断,提出了一种基于粗集理论的车地无线通信装备故障诊断方法。该方法从诊断决策支持系统定义出发,将车地无线通信设备故障诊断问题用一个不同简化层次的故障决策网络表示,由网络节点根据定义出的规则置信度和覆盖度可推导出对应有效的故障诊断规则集合。通过故障诊断规则匹配,便可方便得出车地通信单元故障诊断结果,实例分析表明该方法具有较好诊断有效性。     

移动容迟传感网络拓扑覆盖建模与统计特征*

移动容迟传感网络的拓扑覆盖研究对于相关工程系统设计具有重要意义。针对当前研究没有很好地刻画区域动态覆盖特征的问题,提出基于排队网络的建模方法。进而利用随机几何学和排队论方法,以定理形式提出关于二维平面上区域覆盖的首达时间、覆盖度分布等统计特征的理论结果。结合典型移动场景,仿真验证了上述结果的合理性和应用价值。     

DTN中基于服务等级的Push-Pull拥塞控制研究*

提出了一种基于服务等级的拥塞控制机制,通过为后续高优先级业务预留缓存资源的方法来减小容迟网络(DTN)中由于保管传输协议造成节点缓存资源的耗尽而引起的网络拥塞,从而改善服务质量。仿真结果表明,该拥塞控制方法在缓解网络拥塞的同时可以有效改善高优先级业务的传输性能,但其在一定程度上牺牲了低优先级业务的服务质量。     

纳米电路交叉冗余容错技术研究

提出了一种针对纳米电路的数字电路容错设计新方法．该方法基于交叉冗余原理,利用两种二进制错误的不对称性,采用模块化方法对纳米电路进行容错设计．以阵列乘法器为例,采用新方法对电路进行设计和仿真,并结合实验结果与传统的可重构和三模冗余容错方法进行比较．交叉冗余方法无需检测模块及表决器,不会增加系统延时,并且在资源消耗方面远低于传统方法,对纳米电路尤其适用．