Magnetic properties of high-temperature superconductors: Analysis within the framework of the impurity mechanism

The impurity mechanism proposed earlier is used to interpret the magnetic properties of hightemperature superconductors. The appearance of superconductive granules and the existence of weak bonds in grains of ceramics and in single crystals is explained. The irreversibility line is obtained and its new interpretation as the line of thresholds of appearance of infinite nonsuperconductive cluster is given. The relaxation time of the magnetic susceptibility in alternating magnetic fields is calculated. The decrease of the Meissner fraction with increase in magnetic field and decrease in doping, and other magnetic properties are explained.     

Impact of QOS requirements on video coding for ATM networks

The broadband integrated services digital networks (B-ISDN) based on asynchronous transfer mode (ATM) technology can support a wide range of applications such as voice, video, still images, and data. Compression techniques increase the effective bandwidth utilization, but the bursty and asynchronous nature of the traffic can still lead to congestion in the network, and degradation of image quality and quality of service (QOS). Some of the features to provide better coding schemes for ATM networks are layered coding, resynchronization, buffering, interleaved schemes, constrained bit rate due to buffers, encapsulation with the RTP or AAL1 for clock recovery, lapped transforms, motion compensation, and optimal bit allocation for coders based on wavelet transforms. We review various techniques forimage and video coding such as transforms, motion compensation, vector quantization, and subband coding. We outline the impact of the cell loss ratio (CLR), delay and cell delay variation (CDV) on video coding: blocking effects, loss of frame synchronization, motion vectors, and vector quantization codewords. The open problems include tuning coding parameters to the available QOS provided by the network.     

纤维表面处理对植物纤维增强水泥的物理力学性能影响

植物纤维增强水泥的力学性能具有湿敏感性，随湿度增加弯曲强度下降幅度较大。本文工作采用的几种浸渍处理纤维表面的方法，有效地改善了这种状况，其中一种经处理的纤维增强水泥较没有处理的对比试样在饱水状态下的弯曲强度提高了67％，气干状态提高了18％，缩小了二者间的差距。     

Positive state‐bounding observer for positive interval continuous‐time systems with time delay

This paper is concerned with the problem of positive observer synthesis for positive systems with both interval parameter uncertainties and time delay. Conventional observers may no longer be applicable for such kind of systems due to the positivity constraint on the observers, and they only provide an estimate of the system state in an asymptotic way. A pair of positive observers with state‐bounding feature is proposed to estimate the state of positive systems at all times in this paper. A necessary and sufficient condition for the existence of desired observers is first established, and the observer matrices can be obtained easily through the solutions of a set of linear matrix inequalities (LMIs). Then, to reduce the error signal between the system state and its estimates, an iterative LMI algorithm is developed to compute the optimized state‐bounding observer matrices. Finally, a numerical example is presented to show the effectiveness and applicability of the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.     

Simultaneous solving of balancing and sequencing problems with station-dependent assembly times for mixed-model assembly lines

In spite of many studies, investigating balancing and sequencing problems in Mixed-Model Assembly Line (MMAL) individually, this paper solves them simultaneously aiming to minimize total utility work. A new Mixed-Integer Linear Programming (MILP) model is developed to provide the exact solution of the problem with station-dependent assembly times. Because of NP-hardness, a Simulated Annealing (SA) is applied and compared to the Co-evolutionary Genetic Algorithm (Co-GA) from the literature. To strengthen the search process, two main hypotheses, namely simultaneous search and feasible search, are developed contrasting Co-GA. Various parameters of SA are reviewed to calibrate the algorithm by means of Taguchi design of experiments. Numerical results statistically show the efficiency and effectiveness of the proposed SA in terms of both the quality of solution and the time of achieving the best solution. Finally, the contribution of each hypothesis in this superiority is analyzed.     

生产线试运行过程工艺分析软件的应用

介绍了生产线试运行过程中，用工艺分析软件解决所遇到的工艺问题，为工艺分析软件开拓了一个新的应用领域。     

圆柱体相贯线上的圆角表示方法

在机械设计中，圆柱体相贯线上的圆角表示方法是CAD和计算机辅助设计中的难题，所有的CAD／CAM软件都没有这一功能，多数使用者采用的是各种近似方法。本文介绍了严密精确的设计和几何造型方法，可用于大型铸锻件和重型机械的CAD和计算机辅助设计。     

磷氮阻燃腈纶结构性能及阻燃机理研究

研究了含磷酸二氢铵和脲复合阻燃剂的共混阻燃腈纶的结构和性能。研究表明，在纤维成形加工过程中，部分阻燃剂聚合生成聚磷酸铵和聚脲，阻燃剂以微粒状均匀分散并包埋在纤维内部；阻燃剂的加入使纤维高序区大分子间等距离排列的规整性和片状结构单元等距离平行排列的程度降低，热稳定性亦略有下降；但纤维的宏形态结构及物理机械性能没有明显变化；磷氮阻燃腈纶具有良好的阻燃性和阻燃耐久性，经碱洗２０次、水洗３０次后，阻燃剂的磷和氮的保留率分别高达８２．９％和８９．５％，纤维的ＬＯＩ值仍在２６％以上。     

微细纤维发展概况与趋势

介绍了微细纤维发展概况,包括生产工艺,纤维性能,最终用途以及当前的发展趋势。并对我国发展微细纤维提出建议.