Suitable test structures for submicron ion beam analysis

For the precise determination of the sizes of submicron beam spots test structures with an excellent edge definition are required. For this purpose a semiconductor heterostructure consisting of an 1.62 μm GaInP epi-layer grown on (0 0 1) GaAs has been made, which provides atomically sharp edges for beam spot size measurements. Since the sample has been thinned down by standard transmission electron microscope (TEM) preparation techniques, it can be used for both PIXE and STIM. The sample has been investigated with a TEM and the ion nanoprobe LIPSION. A one-dimensional beam profile in the low current mode was determined by a STIM measurement using 2 MeV protons and yielded a FWHM of (41±4) nm, which is the smallest value reported so far for high energy nuclear micro- and nanoprobes. Furthermore we present nickel nanowhiskers produced at the GSI Darmstadt by electrochemical preparation of etched ion track membranes that have been used to obtain two-dimensional images of the shapes of submicron beam spots. For these measurements a scan over a single nickel nanowhisker having a diameter of 220 nm and a height of about 6 μm was performed.     

应用人工神经网络优化五点法水平井井网

水平井直井联合布井方式越来越多地应用到油田的实际开发中，但是井网的选择与优化方面的研究比较少，特别是没有根据不同开发阶段变化的生产动态对水平井井网进行优化。应用人工神经网络技术，在进行数值模拟计算的基础上，制作样本并训练网络，可预测任意面积、任意水平井长度下的五点法水平井井网在不同开发阶段的生产动态，优化出不同生产时间和不同井网面积条件下最优井网穿透比，即生产10a时最优井网穿透比为0．55～0．8。与数值模拟结果进行对比，最大误差在1％以内，表明这种方法既快速简便又具有较高的精确性，可以有效地指导五点法水平井井网优化设计。     

Optical analysis of crack tip stress fields: a comparative study

Four optical techniques for evaluating stress intensity factors in opaque specimens are described in outline, and compared for both an artificial crack and a fatigue crack. The results are compared to a standard solution for the geometry considered. All the techniques gave acceptable results over a range of stress levels and crack lengths. The methods of caustics and strain gauges were less good, whilst photoelasticity gave consistent results over a wide range of stress levels. Comments on the ease of application and the resource implications are also made in order to assist practitioners.     

膦化合物对加氢催化剂的影响

丁辛醇装置丁醛加氢催化剂在装置扩能投产以后热点上移 (失活 )的速率较快 ,针对催化剂老化的原因进行分析、判断 ,找出原因 ,采用相应的解决措施 ,可延长催化剂使用寿命 ,增加装置效益     

Motion compensated film restoration

Motion picture films are susceptible to local degradations such as dust spots. Other deteriorations are global such as intensity and spatial jitter. It is obvious that motion needs to be compensated for before the detection/correction of such local and dynamic defects. Therefore, we propose a hierarchical motion estimation method ideally suited for high resolution film sequences. This recursive block-based motion estimator relies on an adaptive search strategy and Radon projections to improve processing speed. The localization of dust particles then becomes straightforward. Thus, it is achieved by simple inter-frame differences between the current image and motion compensated successive and preceding frames. However, the detection of spatial and intensity jitter requires a specific process taking advantage of the high temporal correlation in the image sequence. In this paper, we present our motion compensation-based algorithms for removing dust spots, spatial and intensity jitter in degraded motion pictures. Experimental results are presented showing the usefulness of our motion estimator for film restoration at reasonable computational costs. Received: 9 July 2000 / Accepted: 13 January 2002 Correspondence to:S. Boukir     

深亚微米光记录测试仪

详细描述了进行亚微米、深亚微米光记录和探测的测试仪器，其探测功率可达30mW，最小的探测时间为20ns，探测的最小光点200nm左右，带有CCD观察的系统可方便地定位及进行图像处理，整个测量过程均在计算机控制下进行，操作非常方便，它是对高密度光盘材料记录性能进行测量，以及对深亚微米，乃至纳米记录材料进行研究的有效工具。     

通讯技术在掘进机主令操作中的应用

介绍利用单片微机技术及可编程序控制器 (PLC)实现掘进机主令操作功能通讯模式化的方法 ,并介绍了其系统构成、实施思路和程序设计方法 ,可实现煤矿掘进机遥控操作     

一种矿山用钢筋网自动化焊接生产线的设计

设计一条钢筋网自动化焊接生产线，包括经料送料平台、纬料自动分料及上料机构、多点电阻点焊机、接料平台、卸料机械手。从上料到出料依靠电机、汽缸之间的协调工作来实现。并由单片机和PLC实现控制功能，上位机用MCGS组态软件在整个过程监视现场，采集工作状态及参数，起到监控作用。     

强激光热斑形成及其稳定性研究

在论述热点跟踪及其传热机理时将靶材的比热溶、热传导系、在激光的热藕合系数均考虑成温度和时间的函数，又考虑靶材在运动时将激光辐照物体时热点的建立及其稳定情况作一动态数值模拟，为热点跟踪作准备。     

针尖轮廓飞象扫描检测方法研究

分析了目前我国几种针尖轮廓检测方法、特点和存在问题。提出了一种针尖飞象自动检验方法，其原理是：被检测的针尖和探测器不动，利用转镜系统扫描针尖，产生针尖各部的时序象（飞象），这些依次出现的象受到探测器检测，即可获得反映针尖轮廓的一串直径信息。文中还对飞象扫描法的误差进行了分析和讨论。