大气激光通信中的光斑特性模拟和验证

根据空-地大气激光通信信道的特性,基于惠更斯-菲涅耳原理,应用夫琅禾费圆孔衍射的算法,对光波强度和光斑图像在光束截面内的分布进行分析及计算,研究了传输距离、发射孔径、激光波长以及湍流结构常数等对光斑形状及光强分布的影响。利用对数正态分布建立了大气湍流信道模型,通过对不同传输距离条件下光斑上不同点的光强分布进行计算统计和仿真分析,实验和仿真结果表明：光斑的光强分布图样服从贝塞尔分布。因此,在相同的大气湍流条件下,选择较长波长激光和较大孔径的发射器,可以有效降低光强闪烁引起的衰减,从而提高大气激光的通信质量。     

乐山旅游景区的地形特点及无线通信方案探究

根据乐山物联网产业规划——"把乐山建成全国物联网应用示范城市"的战略目标,考虑到乐山的城市特点,并为了充分发挥乐山的旅游资源及环境优势,将旅游纳入物联网工程管理项目,形成具有乐山特色的"智能景区"旅游管理项目,文中将新科技与传统资源相结合,给出了基于物联网技术的乐山旅游景区无线通信方案。该方案既可使物联网产业化,又具有创新性与实用性,同时也可大大改善传统人工管理的效率。     

Coarse head pose estimation of construction equipment operators to formulate dynamic blind spots

Several hundred workers die in construction in the United States every year because equipment operators are unable to see their fellow workers during operation of their vehicle. In this paper we propose a step towards improving this situation by providing an automated method based on range imaging for estimating the coarse head orientation of a construction equipment operator. This research utilizes commercially-available low resolution range cameras to measure the continuously changing field-of-view (FOV) of an equipment operator in outdoor construction. This paper presents a methodology to measure so-called dynamic blind spot maps. The dynamic blind spot map is then projected on a known static equipment blind spot map that already exists to each construction vehicle. A robust computational coarse head pose estimation algorithm and results to three different pieces of construction equipment and multiple operators are presented. The developed method has the potential in automatically determining the spaces around vehicles that are currently not in the field-of-view of the vehicle operator thus providing eventually additional means and technology for improving safety in construction.     

Photothermal radiometric detection and imaging of surface cracks

This paper discusses surface crack detection by photothermal radiometric imaging (PRI). In PRI, also called dynamic infrared scanning, a surface is scanned with a spot of heat. Imperfections are detected by radiometrically sensing changes in the surface temperature of a small area in the vicinity of this spot. In the work described, cracks narrower than 25 µm (0.001 in.) in a lightly rusted steel surface have been detected. Indiscrete scanning an amplitude modulated heating beam is moved in steps, remaining at each location long enough to measure amplitude and phase of the AC temperature. Incontinuous scanning a constant intensity heating beam is moved continuously while the temperature deviations are measured. This paper presents methods of calculating amplitude and phase of surface temperature for discrete scanning and instantaneous temperature for continuous scanning across a surface crack. For a steel surface scanned by a watt-level laser beam, predicted surface temperature deviations when crossing the crack are several degrees Celsius, with expected radiometrically detected power several orders of magnitude above the detector noise. In experiments performed, both techniques easily detected narrow cracks in a smooth, clean surface. Discolorations and pits, on the other hand, generate a disturbing type of surface noise. This noise was minimized by differential detection. Based on results obtained, continuously scanned PRI with a fan-type heating beam and array detection could become a viable way of mapping surface cracks at practical scanning speeds.     

Effect of deep cryogenic treatment on mechanical behavior of a Cu-Cr-Zr alloy for electrodes of spot welding

The effects of deep cryogenic treatment on mechanical behavior of a Cu-Cr-Zr alloy for electrodes of spot welding were investigated employing Brinell-hardness testing unit, abrasion examination machine, electronic almighty testing machine and X-ray stress analyzer. Tensile fracture surfaces of the alloy were characterized by scanning electronic microscope （SEM） with energy dispersive X-ray spectroscopy （EDS）. The results showed that, after deep cryogenic treatment, σb and σ0.2 increased 23 MPa and 21 MPa respectively, the wear rate of the alloy exhibited the trend of decrease with the decreasing temperature and increasing time of deep cryogenic treatment, and the surface residual stress of the alloy was partially eliminated by deep cryogenic treatment.     

含B4C中性盐浴渗硼工艺问题的研究

在含Ｂ４Ｃ中性盐浴渗硼的高温反应研究的基础上，对该盐浴存在的工艺问题进行了分析研究。指出了渗硼能力均匀性，工件表面腐蚀斑与玻璃体的关系，分析了老化盐致使工件清洗困难的成因。     

深冷处理提高镀锌钢板点焊电极寿命的机理

为了提高镀锌钢板点焊电极寿命，作者提出了镀锌钢板点焊电极的深冷处理方法。采用不同深冷处理工艺参数处理了点焊镀锌钢板的Cr—Zr—Cu合金电极，用这些电极进行了镀锌钢板点焊电极寿命试验并与未深冷处理的电极寿命进行了比较。用扫描电子显微镜对深冷处理电极进行了背散射及面扫描分析，用X射线衍射法观测了深冷处理前后的电极晶粒度，测试了电极在深冷处理前后的电阻率。通过对深冷电极微观结构的观测及电极性能的测试，探讨了深冷处理提高镀锌钢板点焊电极寿命的机理。研究结果表明，深冷处理提高了镀锌钢板点焊电极基体的致密性，改变了合金元素的分布，细化了电极材料的晶粒，提高了镀锌钢板点焊电极的导电、导热能力及电极抗压渍变形的能力，从而提高了镀锌钢板点焊电极的寿命。     

卧式离心铸造汽缸套"黑斑"形成机理及预防措施

卧式离心铸造合金铸铁汽缸套"黑斑"是一种由合金成分和生产工艺等因素而造成的"夹层"石墨漂浮、比重偏析的综合缺陷.主要预防措施是强化冷却和将锰含量提高到2%.     

20CrNiMo牙轮牙爪锻造缺陷对力学性能的影响

KX-250三牙轮钻头上的牙轮牙爪可选用20CrNiMo钢锻造,但20CrNiMo牙轮牙爪在锻造过程中产生的缺陷严重影响产品的力学性能.为此对20CrNiMo牙轮牙爪进行质量跟踪,并对试样进行了力学性能的测试.结果表明：当锻造产生了白点和过热缺陷时,牙轮牙爪的力学性能明显下降,尤其是塑性指标和冲击韧度降低明显.为了防止这些缺陷的产生,还提出了一些对策,以提高牙轮牙爪的力学性能.