有机锡化合物引发D,L-丙交酯的开环聚合

D,L-丙交酯在有机锡化合物四苯基锡(Ph4Sn)、三正丁基醋酸锡(Bu3SnOAc)、辛酸亚锡(SnOct2)等催化剂引发下开环聚合,得到高分子量的聚D,L-乳酸,讨论了聚合单体D,L-丙交酯纯度、聚合温度、聚合时间、聚合体系真空度以及引发剂有机锡催化剂与聚合单体D,L-丙交酯的比例对聚D,L-乳酸合成的影响,通过红外光谱和核磁共振光谱对聚D,L-乳酸的结构进行了表征。实验结果表明,D,L-丙交酯开环聚合反应的较佳工艺路线是:D,L-丙交酯重结晶5次,聚合温度140℃,聚合时间24 h,聚合体系真空度13.3~133.3 Pa,引发剂有机锡催化剂与单体D,L-丙交酯比例0.2‰~0.5‰,此时聚D,L-乳酸的粘均分子量最高,分别达到32.46×104,33.43×104和41.36×104。     

四氯化锡催化合成β-萘甲醚

四氯化锡催化下,β 萘酚与无水甲醇反应合成β 萘甲醚,考察了甲醇用量、催化剂用量、反应时间等对产率的影响。当β 萘酚取1.8g,甲醇1.5mL,SnCl4·5H2O取0.33g时,80℃反应10h,β 萘甲醚产率可达75.3%。     

接插件的表面处理

综述了接插件连续镀金、钯、锡的电镀工艺，包括设备、镀液和镀层性质。     

Piezoresistivity in Polymer-Ceramic Composites

Composite materials composed of randomly dispersed semiconducting ceramic particles in an insulating polymer matrix show a pronounced change in resistivity with pressure. Different amounts of iron oxide (Fe₃O₄) powder and antimony-doped tin oxide (SnO₂:Sb) powder were dispersed in an epoxy polymer matrix to form pressure-sensitive composites. In each family of materials, an insulator-to-semiconductor transition is observed in agreement with percolation theory. Composites within a certain range of filler content showed substantial piezoresistive effect under both uniaxial and hydrostatic pressure in which sensitivity is controlled by the choice of filler material and the volume fraction. The effect of temperature on the piezoresistance effect was also examined. Piezoresistors made from Fe₃O₄ composites showed larger temperature changes than those filled with Sb-doped SnO₂.     

以SnO/ZnO为催化剂合成油酸正丁酯

研究了以SnO／ZnO为催化剂合成油酸正丁酯，优化的工艺条件为：催化剂中ZnO含量为0．04～0．05，催化剂用量为1．0％（占总投料量质量分数），酸醇投料比n油酸：n丁醇为1：1．6，反应温度140～145℃，反应时间1．0h，产品收率达95％以上，催化剂可重复使用4次，再生容易。     

Enhancement of the electrooxidation of ethanol on a Pt–PEM electrode modified by tin. Part I: Half cell study

The direct platinisation of a solid polymer electrolyte (Nafion^® membrane) was realized by chemical reduction of a platinum salt. The Pt–PEM electrodes thus obtained were modified by tin to improve the electrocatalytic activity towards the electrooxidation of ethanol. The Pt–PEM and Pt–Sn–PEM electrodes were characterized by TEM, EDX and XRD analysis, cyclic voltammetry, and their polarisation curves for the electrooxidation of ethanol were determined under quasisteady state conditions.     

酸性镀锡液的新进展

从近几年美国发明专利的角度扼要综述酸性镀锡液的新进展。说明酸性镀锡液由氟硼酸盐型发展为烷基磺酸盐型的改进过程。列出参考文献９篇。     

选择性螯合滴定法测定电镀液中的锡铜铅

提出了测定电镀液中锡铜铅的一个简易快速螯合滴定法.用EDTA螯合锡(Ⅳ)、铜(Ⅱ)、铅(Ⅱ)和其它金属离子,然后分别用三羟基苯甲酸、巯基丁二酸和氨荒丙酸解蔽.释放出的EDTA,用锌标准溶液反滴定(XO-CPB为混合指示剂).终点变化相当敏锐.研究了测定锡、铜、铅时一般共存离子的干扰.此法已被成功地用于测定锡-铜-铅合金电镀液和镀层锡铜铅合金中的锡、铜和铅.     

重铬酸钾滴定法测定甲基磺酸锡中Sn~(2+)和Sn~(4+)的含量

研究了以重铬酸钾间接滴定甲基磺酸锡中Sn2+和Sn4+含量的方法。在6mol/L盐酸中用锌粉把Sn4+还原为Sn2+,加入硫酸铁铵快速氧化Sn2+,硫酸铁铵中的Fe3+被还原为Fe2+。用重铬酸钾滴定Fe2+来间接测定Sn2+和Sn4+含量。方法相对标准偏差为1.65‰,回收率99.98%。该方法简便,快速,结果准确可靠。     

浮法硼硅酸盐玻璃下表面渗锡的研究

根据实验样品的成分,制定一定的浮法成型的温度制度,采用自制小型石墨锡槽,模拟硼硅酸盐玻璃的浮法成型过程,用电子探针结合能谱仪,测试浮法硼硅酸盐玻璃在1250~650℃温度范围内不同温度段下表面渗锡的分布情况,研究硼硅酸盐玻璃不同于传统钠钙硅浮法玻璃的渗锡特点。研究结果表明,在特定的浮法工艺制度下,硼硅酸盐玻璃渗锡的深度达到40μm左右,并且高温段锡离子以纵向深度扩散为主,低温下锡离子主要在玻璃的近表面富集。在浮法成型的过程中,渗锡的分布曲线上会出现卫星峰,但是最终在出锡槽的温度下渗锡曲线是单调递减的。