等宽K型间隙方管节点静力工作性能的研究

焊接矩形管结构设计中的关键问题是节点的受力性能。利用非线性有限元分析方法，采用典型节点分析与较大规模几何参数分析相结合的研究手段，对等宽K型间隙方管节点的静力工作性能进行了研究。不仅跟踪了节点荷载－位移曲线的全过程，而且全面考察了主要参数对节点刚度、极限承载力、变形、失效模式等方面的影响，并将分析结果与CIDECT公式计算结果相比较，得出控制此类节点的失效模式主要是弦杆的整体 剪切失效、“有效宽度”失效、腹板局部承压破坏以及这几种破坏形式的混合模式。     

寺河矿井安全高效采煤方法的选择与分析

介绍了寺河矿井东区煤层开采技术条件 ,对综采放顶煤采煤法和大采高采煤法两种方案进行了论证比较 ,通过采煤实践数据证明 ,得出大采高采煤法是适合寺河矿井安全高效采煤方法的结论     

高速PRNS数母全加器的设计及测试原则

ＰＲＮＳ数母全加器的研制成功成功地采用了最大时间差流水线的设计原则并利用Ｆ１００Ｋ高速组件（ＥＣＬ）实现之，经功能测试后（采用自外向内的静态，动态两方面的测试方法）其工作周期为７ｎｓ。     

双凸极起动/发电机系统一体化设计与实现

起动/发电技术是当今航空电气技术发展的重要方向,基于DSP控制的电励磁双凸极起动/发电机系统具有良好的应用前景。分析了电机结构与起动/发电一体化工作原理。为了使系统的体积、重量减少,使控制电路简化,该文对主功率变换器、励磁功率电路和硬软件控制电路进行了一体化设计,并以DSP芯片为基础,实现了起动、起动/发电切换与发电工作的全数字控制。实验验证了起动/发电一体化设计方案的可行性,表明电励磁双凸极起动/发电机系统能可靠起动,起动/发电切换控制简单,发电电压稳定且可实现故障发电。     

低压非大工业用户电能表与电价制改革初探

当前我国低压非大工业用户计费电能表及其电价制存在的问题已经制约了电力市场的正常发展和电力需求侧管理的开展。章提出了用双费率全功电能表和最大需用容量全功电能表取代原计费电能表，实行双费率综合电价和新两部制综合电价来取代现行简单制电价等改革措施以供参考。     

AH-1型全自动吸枪式氦检漏仪的研制

研制与生产目前国内最长(15 m)吸枪式氦检漏仪.在计算与实验研究的基础上设计与制造180°磁偏转分离型电子轰击离子源及逆流小孔分流型的AH-1型全自动吸枪式氦检漏仪的整体结构.在吸枪上配制有可操作与控制的微型显示仪表.它的特点是:启动时间短、灵敏度高、反应时间快等.因而是大型容器与高压容器检漏的理想仪器.文中介绍了设计的要点及现场实用范例.     

A finite element formulation to identify damage fields: the equilibrium gap method

It is proposed to determine damage parameters in two dimensions (surface of a material) or three dimensions (in the bulk of a solid) by using full‐field displacement measurements. A finite‐element approach is developed to evaluate piece‐wise constant elastic parameters modeled by an isotropic damage variable. Two sets of examples are discussed. The first series deals with mechanical fields obtained by finite element simulations to assess the performance of the approach. The second series is concerned with displacement measurements performed during a biaxial test on a composite material. Copyright © 2004 John Wiley & Sons, Ltd.     

全自动快速分析室控制系统的设计与应用

介绍了冶金行业全自动快速分析实验室控制系统的开发、设计及其应用 ,包括控制系统硬件构成、网络配置和软件设计方案。系统采用全自动控制方案和分级控制策略 ,整个分析过程无需人为干预 ,实现了全自动无人快速分析。本系统已成功应用于攀钢集团提钒炼钢厂的冶炼生产实践中     

Applications of Thermoelectric Power Measurement to Deterioration Diagnosis of Nuclear Material and Its Principle

In order to non-destructively evaluate changes in toughness of cast duplex stainless steel, which is frequently used in main coolant pipes of PWR type nuclear power plants, due to thermal aging, we tried to apply thermoelectric power (TEP) measurement. because TEP is sensitive to microstructural material changes, and to clarify the mechanism behind TEP changes due to thermal aging. As a result, TEP of cast duplex stainless steel increased with aging time, and good correlations were found between TEP and toughness. Concerning the mechanism, TEP of high and low Cr content alloys was higher than that of intermediate Cr content alloys. Because high and low Cr areas are created in the ferrite phase due to thermal aging. TEP of the entire material increased. Furthermore, when each Cr fluctuating area acted in parallel, the increase in TEP became larger. According to the Mott-Jones theory, TEP is largely related to the electron density of states at the Fermi level. The electron density of states of Fe–Cr–Ni alloys in the valence band was measured with X-ray photoelectron spectroscopy (XPS). As a result, there was a high correlation between the TEP calculated from the XPS spectrum and the measured TEP. Therefore, we showed experimentally that the electron density of states changed due to variations in Cr concentration, which also affect TEP.     

移相全桥零电压变换器的建模与控制

在Buck变换器小信号模型的基础上,建立了移相全桥零电压变换器的小信号模型.分析了控制环路的幅频特性和相频特性,设计了移相全桥零电压变换器控制环路的补偿网络,从而提高了系统的瞬态响应及稳定性.通过仿真验证了小信号模型的正确性和补偿网络设计的合理性.