关于建立城市智能交通实验研究中心的设想

基于联系国内外智能交通系统研究的具体实际，提出了建立城市智能交通实验研究中心的设想，并结合一个集成了视频和线圈信息采集方式的实验研究中心简单设计方案，对其所具有的基本功能作了初步研究和探讨。该系统兼具促进交流和有关培训等社会职能，可以作为国家智能交通事业发展过程中一种特殊的示范工程。     

Research and Development of a Network—Based Intelligent Maintenance Information System

A maintenance information system is an important part of equipment management.An intelli-gent maintenance information system(IMIS)is a synthesis of network technology,information technology and intelligent technology.The IMIS in used to finish flexible maintenance decision-making and fast main-tenance planning,which helps enterprises to effectively reduce maintenance cost and increase working effi-ciency.Because the IMIS integrates advanced technologies,its performance is better than a traditional one.The difference between an IMIS and a traditional maintenance information system,and the functions,struc-ture,important realizations,and application of an IMIS are discussed in this paper.     

基于VXI总线的超宽带线性调频信号源的设计

主要介绍了VXI总线C尺寸超宽带线性调频信号源的设计方法，重点描述了利用现场可编程逻辑器件FPAG和DSP设计VXI总线接口电路，以及数字波形存储直读技术在线性调频信号源中的应用。     

芴酮在合成功能高分子方面的应用

介绍了由芴酮合成的双酚芴在高分子材料方面的应用，尤其是在环氧树脂、聚碳酸酯、有机玻璃方面，与双酚A相比，用双酚芴改性的高分子材料具更高的耐热性及透明性。     

基于扩展分形和CFAR特征融合的SAR图像目标识别

研究了多信息融合技术在SAR图像目标识别中的应用。将扩展分形特征(Extended Fractal)与双参数恒虚警特征(Double Parameter CFAR)形成的多信息进行融合处理。运用Dempster-Shafer证据理论，在决策层对SAR图像中的像素进行识别分类。实验结果表明通过融合对像素分类的准确性明显好于单特征的检测结果，减少了虚警概率，提高了系统的识别能力。     

超宽带极窄脉冲设计与产生

超宽带(UWB)技术是以持续时间极短的脉冲作为传输载体进行数据通信的无线新技术。基于BJT雪崩特性,本文采用并行同时触发的工作方式,设计并产生了高重复速率的UWB脉冲电路发生器,极大地减少了时延,缩短了上升时间,提高了脉冲的幅度,并从等效电路法的观点分析计算了脉冲的特性参数,理论结果与实测结果具有较好的一致性。     

闪光灯泵浦Nd3+:GGG激光特性研究

用闪光灯泵浦掺钕钆镓石榴石(Nd^3 ：GGG)激光晶体，研究了脉冲宽度0．5ms、1ms、1．5ms和2ms的放电泵浦下激光输出，实验获得了1．92J的最大激光能量．     

Segmented polymer networks containing amino‐dendrimers

Polymer networks in which poly(propylene imine) dendrimers (Astramol?) are connected to each other by linear polytetrahydrofuran (polyTHF) segments, were prepared by two methods. The first method was a one‐step procedure in which bifunctionally living polyTHF, obtained by initiation of the THF polymerization with trifluoromethane sulfonic anhydride (triflic anhydride), was reacted with an amino‐dendrimer. This reaction was very fast but did not allow formation of the end products. The second method was a two‐step procedure. In a first step, living polyTHF, prepared with acryloyloxybutyl triflate as initiator, was grafted on an amino‐dendrimer, to form a star‐like, acrylate‐terminated polyTHF multi‐macromonomer with the dendrimer as core. In a second step, networks were obtained by Michael addition between the acrylate end‐groups and unreacted amino‐groups of the dendrimer. This cross‐linking reaction occurred spontaneously upon heating of the solution of the multi‐macromonomer with gelation times varying from a few minutes to a few hours, depending on the temperature and the composition of the prepolymers. With this method it was possible to prepare networks in the form of coatings or films. © 2003 Society of Chemical Industry     

牛奶加工过程中的清洗(二)

五．牛奶厂的清洗。目前，牛奶厂采用的清洗方式主要是CIP清洗(Cleaning in place)，原地清洗或称定置清洗，即在基本不拆卸或挪动机械装置和管线的情况下对生产过程中能与牛奶发生接触的设备表面进行的清洗。其冲刷、清洗、灭菌的整个过程全部实现了自动化因此大大降低了劳动强度。而有一些不     

斜拉索-磁流变阻尼器系统半主动控制的神经网络法

磁流变阻尼器具有良好的可变阻尼特性，能用于结构的半主动控制。针对斜拉桥拉索-磁流变阻尼器系统，本文提出了利用神经控制器进行半主动控制的神经网络法，该神经控制器根据过去时刻的加速度响应和控制信号预测下一时间步的控制信号，并给出了训练方法及开展了数值仿真研究。仿真结果显示，采用神经网络半主动控制能取得很好的减振效果，证明该方法是可行的。