磁性液位计(模拟法)检测方法

在分析"实液法"的基础上,提出一种新的针对磁性液位计的"模拟法"检测方法。介绍其检测过程,探讨了通过精确标记V形磁铁移动距离提高测量准确度的关键方法,并对其可行性与准确性进行实验验证。     

基于浮子和磁铁驱动水位控制器的开发和应用

本文旨在提供一种经济型的，基于PP浮子和磁铁驱动，通过干簧管控制水位上下限的小型磁敏水位控制器方案，目前在空调扇、饮水机领域已得到广泛应用。     

Cycle time-oriented mid-term production planning for semiconductor wafer fabrication

Wafers are produced in an environment with uncertain demand and failure-prone machines. Production planners have to react to changes of both machine availability and target output, and revise plans appropriately. The scientific community mostly proposes WIP-oriented mid-term production planning to solve this problem. In such approaches, production is planned by defining targets for throughput rates and buffer levels of selected operations. In industrial practice, however, cycle time-oriented planning is often preferred over WIP-oriented planning. We therefore propose a new linear programming formulation, which facilitates cycle time-oriented mid-term production planning in wafer fabrication. This approach plans production by defining release quantities and target cycle times up to selected operations. It allows a seamless integration with the subordinate scheduling level. Here, least slack first scheduling translates target cycle times into lot priorities. We evaluate our new methodology in a comprehensive simulation study. The results suggest that cycle time-oriented mid-term production planning can both increase service level and reduce cycle time compared to WIP-oriented planning. Further, it requires less modelling effort and generates plans, which are easier to comprehend by human planners.     

MODELS OF HUMAN COMMUNICATION: DIALOGUE WITH COMPUTER

A model of understanding texts of a natural language is presented, which consists of three levels. On the first level, the system uses only information in the given text. On the second level, it employs additional information from a knowledge base. On the third level, understanding is connected with some activity of the system stimulated by the available information.     

Design and application of discrete wavelet packet transform based multiresolution controller for liquid level system

A new controller based on discrete wavelet packet transform (DWPT) for liquid level system (LLS) has been presented here. This controller generates control signal using node coefficients of the error signal which interprets many implicit phenomena such as process dynamics, measurement noise and effect of external disturbances. Through simulation results on LLS problem, this controller is shown to perform faster than both the discrete wavelet transform based controller and conventional proportional integral controller. Also, it is more efficient in terms of its ability to provide better noise rejection. To overcome the wind up phenomenon by considering the saturation due to presence of actuator, anti-wind up technique is applied to the conventional PI controller and compared to the wavelet packet transform based controller. In this case also, packet controller is found better than the other ones. This similar work has been extended for analogous first order RC plant as well as second order plant also.     

气藏采收率影响因素研究与启示——以靖边气田A井区为例

以鄂尔多斯盆地靖边气田A井区为例，采用单因素相关分析和数值模拟方法，对比研究了井网控制程度、储层物性及地层废弃压力对气藏采收率影响及其主次关系。结果表明，井网控制程度是影响采收率的首要因素，井网控制程度每增加10%，采收率提高8.5%；渗透率是影响采收率的重要因素，渗透率每增加10%，采收率平均增加6%；废弃压力对采收率亦有较大影响，废弃压力每降低10%，采收率可提高1.6%。三者对采收率影响综合排序为：井网控制程度>储层物性>废弃压力。分析认为，渗透率是储层固有属性，很难从根本改变；而废弃压力受井口外输压力和增压开采成本制约，降低幅度有限。因此，优化井网及增加井网控制程度是提高气藏采收率的有效途径。研究成果具有实践意义，可为改进气田开发方式和提高气藏采收率提供参考。     

高职高专计算机应用基础以证代考模式研究

随着我国社会主义现代化建设的发展,信息化、办公管理现代化的要求愈来愈迫切,作为现代化管理的重要手段—计算机应用已深入各领域、各行业、各部门。计算机知识的掌握和应用是高职高专学生服务社会的必备条件。由于信息技术的快速发展及高职高专的特点,本文针对我院多年来实践"以证代考"模式的实施方案、取得效果、存在问题几个方面进行阐述。     

Gait recognition based on joint distribution of motion angles

Gait as a biometric trait has the ability to be recognized in remote monitoring. In this article, a method based on joint distribution of motion angles is proposed for gait recognition. The new feature of the motion angles of lower limbs is defined and extracted from either 2D video database or 3D motion capture database, and the corresponding angles of right leg and left leg are joined together to work out the joint distribution spectrums. Based on the joint distribution of these angles, we build a feature histogram individually. In the stage of distance measurement, three types of distance vector are defined and utilized to measure the similarity between the histograms, and then a classifier is built to implement the classification. Experiments has been carried out both on CASIA Gait Database and CMU motion capture database, which show that our method can achieve a good recognition performance.     

To reduce side lobe level of slotted array antennas using nonuniform waveguides

In this article, a method is presented to reduce the side lobe level of slotted waveguide array antennas while the gain to be constant. In this method, the H‐plane dimension of the waveguide is considered as the variable rather than constant. The nonuniformity of waveguide walls obviates the need for offset of slots and thereby reduces the side lobe level of radiation pattern. A slotted nonuniform waveguide is designed at frequency 10 GHz and then fabricated and tested. © 2015 The Authors International Journal of RF and Microwave Computer‐Aided Engineering Published by Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:42–46, 2016.     

玻璃纤维增强塑料夹砂管物理性能检测的研究

研究了玻璃纤维增强塑料夹砂管环刚度、挠曲水平、环向拉伸强力和轴向拉伸强力检测方法,比较分析了各种方法的优缺点与适用范围,同时比较全面地总结了夹砂管物理性能的检测方法。在实际检测过程中应当结合管道的设计参数,充分考虑夹砂管各结构层之间的相对关系以及每个结构层内各部分的关系,选择最合适的检测方法。