Semianalytical Model for Drawdown due to Pumping a Partially Penetrating Large Diameter Well

A semianalytical model is developed for computing drawdowns in and around a partially penetrating large diameter well. The new model can take into account an unsteady pumping discharge and thus drawdowns during recovery can be computed. This model can also yield the unsteady contributions from well and aquifer storages to the pumped discharge. While developing the model, the flow from the bottom of the well is also accounted.     

热处理对Ti-25V-15Cr-2Al-2Mo-0.2C合金组织稳定性的影响

研究了热处理对Ti-25V-15Cr-2A1-2Mo-0.2C阻燃β钛合金组织稳定性的影响。结果表明，高温固溶并直接时效处理导致合金β基体上析出较多的α相沉淀，尤其在随后的热暴露组织中形成了恶化合金塑性的连续晶界α膜。然而，若在时效前再进行一次低温固溶处理则可明显减少α相的析出数量，合金的热稳定性因此而得到显著改善。     

Pool boiling on a superhydrophilic surface

Titanium Dioxide, TiO₂, is a photocatalyst with a unique characteristic. A surface coated with TiO₂ exhibits an extremely high affinity for water when exposed to UV light and the contact angle decreases nearly to zero. Inversely, the contact angle increases when the surface is shielded from UV. This superhydrophilic nature gives a self-cleaning effect to the coated surface and has already been applied to some construction materials, car coatings and so on. We applied this property to the enhancement of boiling heat transfer. An experiment involving the pool boiling of pure water has been performed to make clear the effect of high wettability on heat transfer characteristics. The heat transfer surface is a vertical copper cylinder of 17 mm in diameter and the measurement has been done at saturated temperature and in a steady state. Both TiO₂-coated and non-coated surfaces were used for comparison. In the case of the TiO₂-coated surface, it is exposed to UV light for a few hours before experiment and it is found that the maximum heat flux (CHF) is about two times larger than that of the uncoated surface. The temperature at minimum heat flux (MHF) for the superhydrophilic surface is higher by 100 K than that for the normal one. The superhydrophilic surface can be an ideal heat transfer surface. Copyright © 2002 John Wiley & Sons, Ltd.     

40kg试验焦炉的研制

文章介绍了40kg试验焦炉，分析和比较了试验焦炉与生产焦炉的差异，指出它们之间的模拟条件是炭化室宽度、煤料堆密度、炼焦速度和单向传热。     

新型保温材料—炭化稻壳在连铸生产中的应用效果

对新型保温材料──炭化稻壳的理化指标及其保温性能进行了阐述。在连铸生产中采用炭化稻壳做保温剂可取得显著的经济效益，是理想的保温材料。     

八种新功能晶体的比热及其与相变掺杂物关系的实验研究

本文对八种新型功能晶体Ｌｉ２Ｂ４Ｏ７、Ｂｉ１２ＴｉＯ２０、Ｂｉ１２ＧｅＯ２０、Ｂｉ１２ＧｅＯ２０、Ｂｉ４Ｇｅ３Ｏ１２、Ｓｒ１－ｘＢａｘＮｂ２Ｏ６（ｘ＝０．３３，０．４８）、ＬｉＴａＯ３等在１３０～９７３Ｋ范围内的比热行为及其与相变、组分之间的关系进行了实验研究，给出了比热的多项式拟合方程，并与用纽曼－卡普定律及用Ｗｉｋｅｌｍａｎｎ经验方程的比热计算值作了对比，为晶体比热的估算提供了依据和方法。     

JETS,PLUMES AND BUOYANT JETS IN STATIC ENVIRONMENT

Turbulence represents an essential aspect in atmospheric and oceanic circulations.In particu-lar,it is a preponderant factor in the dispersion of pollutants of artificial or natural origin.Thevertical turbulent jets,plumes and buoyant jets discharging into static environment is one of themost important and basic flow patterns related with the environment pollution.These flows havenumerous important applications,for example,thrust augmentors,waste disposal plumes fromstacks and combustion systems,and significant problems of turbulent diffusion.     

Computer analysis,design and simulation of horizontal ground heat exchangers

This paper presents a new computerized procedure for dealing with the design of horizontal ground heat exchangers (HGHE). The computer program is based on the transient model of coupled nonlinear partial differential equations governing heat and mass flow in soils. The model is two-dimensional and delineates the operation of ground heat storage with the HGHE and such phenomena as freezing/thawing and drying/rewetting of soil moisture. Comprehensive climatological data, such as ambient temperature, solar radiation, wind velocity, rainfall, snowfall, snow characterstics, and water vapour pressure is used to simulate conditions at the ground surface over any required length of time. The package can be applied to any geographical location by changing climatic and soil data input. The designer has the possibility of selecting any of 12 types of soils from sand to clay, 12 commercial heat pumps, nine different configurations of the HGHE, 16 plastic pipes for ground coils, and 13 ground coil fluids. The program, however, does not calculate the length of the HGHE but it evaluates the thermodynamic performance of a ground heat pump system and provides comprehensive data on thermal and hydraulic conditions in ground heat storage. The length of the ground heat exchanger is obtained from a line source theory model or from site dimensions and pipe spacing. Computed results for ground heat exchanger operation correlate fairly well with experimental data. Simulation of temperature and moisture content in the ground for natural conditions (no heat extraction/deposition) showed a fair agreement with field data. The entire computer program is user-friendly, interactive, menu-driven, and written in FORTRAN 77.     

综述老油田改善开发效果及提高采收率技术

中国陆上老油田已进入高含水后期开发，随着开采程度加深，地下油水关系越来越复杂，剩余油分散，给油田稳产和调整挖潜带来的难度越来越大。但目前老油田储量和产量的比例，仍占陆上总开发储量和产量的７０％以上，是生产上的主力，其潜力也最大，仍然是今后调整挖潜的主要对象。鉴于中国陆上油田绝大多数为陆相储层，构造复杂，非均质严重，原油粘度偏高，石油地质特点决定了水驱油的不均匀性及剩余油分布的复杂性，潜力就存在于这种复杂之中。根据中国陆上石油地质特点和老油田开发现状，围绕改善开发效果及提高采收率着重阐述了四个方面的配套技术：即认识油藏的配套技术，主要包括油藏动态监测技术、油藏精细描述技术、油藏数值模拟技术；完善注水开发配套技术，主要包括注水结构调整、产液结构及含水结构调整、钻取高效调整井、改造“双低”单元、配套工艺技术等；热力采油配套技术；化学驱采油配套技术。经过多年来的努力，我国陆上油田提高采收率技术有了明显进步，针对不同类型油藏潜力分布特点，采用各种有效方法及其配套技术，为挖潜增储、增产提供了很大的余地。     

一种两性离子聚合物的合成性能及应用分析

本文合成了一种两性离子聚合物：丙烯酰胺—二甲基二烯丙基氯化铵—丙烯酸共聚物（ＰＡＤＡ），讨论了三种单体的投料比对产物的组成影响。对它的结构进行了红外表征，就其絮凝、粘土防膨、抗温、抗盐性能进行了研究。结果表明：ＰＡＤＡ具有好的防膨能力和良好的抗温抗盐性能，并有絮凝能力。