动态分频器技术

本文介绍了动态分频器的基本原理；详细叙述了动态分频器电路及其主要工艺技术；综述了国外动态分频器的发展动态。     

叠后高分辨率资料处理方法及应用效果

高分辨率勘探是一项系统工程，它由多个环节组成。甚至叠后高发辨率资料处理也是由多个环节组成。本文介绍的叠后高分辨率资料处理流程主要包括Ｌｐ模自适应预测统计反褶积，高频成分补偿，振幅补偿及有色成分校正。文中还就处理流程中各种方法的合理组合，各种方法自身参数的合理选取作了试验和探讨，最后给出了处理实例。     

合山电厂3个机组主厂房定向爆破拆除

介绍了广西合山电厂 1#～3# 机组主厂房定向爆破设计与施工.该工程不仅规模大、环境十分复杂、工期紧、难度高、风险性极强,最大特点是拆除发电设备与爆破同步进行施工.     

高频等参数感应(ВИКИЗ)测井技术应用

介绍了高频等参数感应的基本原理。以胜利油田比较典型的 3口井为例 ,详细分析了高频感应资料在划分薄夹层、确定储层流体饱和类型、评价储层电阻率空间分布等方面的应用。研究结果表明 ,高频感应具有极高的纵向分辨率和较好的径向探测特性 ,能够准确计算地层真电阻率、侵入带电阻率及侵入半径 ,通过与常规感应及薄层测井资料的对比 ,论证了高频等参数感应在测井技术应用上的优越性     

高能气体压裂联作技术进展

国内高能气体压裂增产技术已经由单一的有壳弹、无壳弹、液体药、可控脉冲等高能气体压裂,进展到与射孔、水力压裂、酸化、化学解堵等技术相联作的综合压裂阶段。分别对高能气体压裂与射孔、水力压裂和化学解堵等联作技术的基本原理、现场试验、作业效果等进行了介绍。高能气体压裂已发展成一种基本成熟的、综合性油气田增产改造新技术。     

平面Z-型软磁铁氧体频率特性的研究

研究分析了Co2Z材料显微结构与磁性能的关系,在普通铁氧体工艺中引入预磁化处理方法,并适当控制二次再结晶现象,成功地研制出高性能的Co2Z型宽频材料,Z-型铁氧体材料的共振频率可达1.8GHz以上,截止频率在1GHz附近,起始磁导率在8-13之间,介电常数相对较低(ε'<30)。     

用瑞利波检验高喷防渗墙的施工质量及地层分布特征

本文阐述了瞬态多道瑞利波探测的原理和方法，并将其应用到大堤高喷防渗墙施工质量的检验中，取得一定成效，测试结果与测压管观测结果对比，相互吻合，为类似工程的质量检验提供了一种可采用的检测手段。     

Isolation and preliminary characterization of Pichia pinus mutants insensitive to glucose repression

A new method for the isolation of glucose repression-insensitive mutants in the methylotrophic yeast Pichia pinus was developed. The method is based on screening of small suspension samples derived from 2-deoxyglucose-resistant colonies for alcohol oxidase activity. Alcohol oxidase activity was evaluated by determination of formaldehyde excreted by cells. Mutants with glucose non-repressible alcohol oxidase and catalase synthesis were obtained. All mutants grew poorly on D -xylose compared to the wild type, whereas growth on L -arabinose was similar to the wild type. Changes in the glucose transport system were suggested to be responsible for altered growth characteristics and defective glucose repression.     

Effect of pretreatments and freezing rate on the firmness of potato tissue after a freeze–thaw cycle

The texture of potato tissue after a freeze–thaw process using different freezing rates and different pretreatments was analysed, in order to select the best strategy for optimum preservation of the textural characteristics of pre‐frozen potato. Ten blanching conditions were tested and a two‐step blanching process with calcium chloride (0.07 g mL^?1) proved the most effective in protecting the tissue after a freeze–thaw process (maximum load force around 10–55% of the raw tissue, depending on potato batch, for air‐blast freezing and 20–60% for immersion freezing). Vacuum impregnation at 100 and 400 mbar, even when followed by different pre‐drying treatments to remove excess water, was very detrimental to resistance to a freeze–thaw process (maximum load force below 10% of the raw tissue for air‐blast freezing and below 20% for immersion freezing). Microstructure analysis confirmed better tissue integrity retention with ethyleneglycol immersion freezing instead of air‐freezing. Differences were found between batches with a 6‐month difference in storage time, indicating that the fresher batch was more suitable for freezing.     

厚膜型无溶剂环氧重防腐涂料的研究

比较了不同环氧树脂、环氧固化剂、颜填料、助剂等的特性,制备了厚膜型无溶剂环氧涂料,并进行了各项性能的检测,结果表明,该涂料具有极低的VOC含量,符合环保要求,适用于要求长效防腐的钢构件。