2004年高压开关设备运行统计分析

文章给出了2004年国家电网公司系统7.2~550kV高压断路器的装用情况,重点对其在运行中的事故及障碍情况分别按类型、电压等级、事故责任分布进行了统计分析,对发生拒动、误动、绝缘、载流、外力及其他不同类型故障的原因进行了分析,指出了在专业管理中存在的问题,并提出了技术对策,以供电力系统运行部门和高压开关制造厂参考。     

An Attempt at the Classification of Energy Decaying Schemes for Structural and Multibody Dynamics

This paper analyzes the formulation of energy preserving/decaying schemes for dynamics problems. We argue that any energy preserving/decaying scheme can always be seen as composed of an underlying temporal discretization, that is then slightly modified in order to prove a discrete energy bound within a time step. While the details of the modified scheme depend in a critical way on the governing equations, the underlying discretization can in principle be applied to a variety of models. We review some of the temporal underlying schemes recently proposed in the literature, presenting them with a common notation. We show their similarities and highlight their differences.     

高能球磨LaNi5-34%(质量分数)Mg的相组成与热稳定性能

采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、差热分析(DTA)等方法研究了高能球磨及热处理等对新型合金LaNi5-34％(质量分数)Mg的相组成、形貌及热稳定性能等的影响。结果表明：经100r／min球磨100h及190r／min球磨100h后,样品由La、Mg、Ni等非晶。微量的晶体Ni和MgNi2相组成,所得粉末的形状大多为规则的球形或近球形,其颗粒直径范围为0．05～33．0μm。球磨样品具有较好的室温活化特性，其最大电化学放电容量为460mAh／g。该样品经763K保温35d后，得到热稳定性较好的具有纳米尺度的MgNi2、Mg2Ni、Mg2NiLa三相组织，其平均晶粒直径为21.3nm。     

High-Temperature Strength of Niobium Alloy 5VMTs with a Silicide-Ceramic Coating. Part 1. Short-Term Strength Characteristics

Experimental data on the short-term strength and plasticity of niobium alloy 5VMTs of the system Nb–W–Mo–Zr in its initial state, after annealing, and with a silicide-ceramic protective coating obtained by testing in vacuum, an inert atmosphere, and in air in the temperature range from 290 to 2270 K are analyzed. The process of microcrack initiation and propagation in the protective coating and matrix is investigated in high-temperature static tension. The limiting plastic strain values have been established at which the composite retains its load-carrying capacity in high- temperature aggressive and oxidizing gas atmospheres.     

用高新技术改造传统产业

研究鞍山钢铁集团公司(以下简称鞍钢)的基本状况，并对改造前和改造后的鞍钢状况做了对比分析，明确鞍钢改革的方向。论证了鞍钢用高新技术改造传统产业的策略，指出鞍钢要生存和发展，必须走体制创新、技术创新和管理创新的道路，实现企业结构优化，增强与国际钢铁企业竞争的实力，从而为大型国有企业走出困境提供了一些有益的经验。     

Harmonic solution of semiconductor transport equations for microwave and millimetre-wave device modelling

The hydrodynamic transport equations for charges in a semiconductor have been solved for a periodic excitation by means of a harmonic approach, in order to model microwave and millimetre-wave active devices. The solution is based on the expansion of physical variables in a Fourier series in the time domain, and on discretisation in the space domain. A waveform-balance technique in the TD is used to solve the nonlinear equations system. This approach allows for a longer time step with respect to standard TD solutions for most cases of interest, greatly reducing simulation time by at least two orders of magnitude in typical cases. © 2003 Wiley Periodicals, Inc. Int J RF and Microwave CAE 14: 36–48, 2004.     

Microscopy under pressure--an optical chamber system for fluorescence microscopic analysis of living cells under high hydrostatic pressure

High hydrostatic pressure (HHP) becomes more and more interesting for life science research, since it can be employed to inactivate various cells. To directly monitor "cells under pressure," the development of an optical high-pressure chamber is required. Therefore, an optical pressure chamber that can be used for up to 300 MPa was constructed. This chamber has already been described as a tool for in situ observation of dynamic changes of microscopic structures in bright field as well as phase contrast. In combination with an inverted microscope, we obtained brilliant microscopic color pictures with an optical resolution more than 0.56 microm. Here, we demonstrate the capabilities of the HHP cell, in combination with epifluorescence microscopy. Using a nonadherent human B-cell line (Raji, ATCC CCL 86), stained with the fluorescent dyes propidium iodide, Hoechst 33342, or dihexyloxacarbocyanine iodide, we were able to show that the system is suitable to perform fluorescence microscopic analyses, with pressures up to 300 MPa, with viable mammalian cells.     

Atmospheric effects of friction,friction noise and wear with silicon and diamond. Part II. SEM tribometry of silicon in vacuum and hydrogen

Scanning electron microscope (SEM) tribometric data on polycrystalline silicon (poly-Si) vs. poly-Si, Si(100) vs. Si(100) and Si(111) vs. Si(111) interfaces, obtained in Torr and in 0.2 Torr partial pressure of hydrogen gas ( ) from room temperature to 850^°C, were performed under standard and much slower thermal ramping rates. The friction data were analyzed per the methodology described in part I of this paper series. The results indicate a highly beneficial friction- and wear-reducing regime within a relatively narrow thermal region. This desirable region coincides with some chemisorption of excited species of molecular hydrogen just before the mass thermal desorption of surface hydrides. These data represent the tribochemical equivalent of a method routinely used in electronics, whereby deep electron traps (dangling Si bonds) are passivated by baking in molecular hydrogen. The also exerts a moderating influence on the size of the friction noise at all test temperatures. However, the general level of friction beyond the beneficial thermal region is high. In parallel, the general wear rate of Si representative of the entire range of standard thermal ramping in both atmospheric environments is in the extremely high 10^-12m³/(N m) range. Operating strictly in the beneficial, low-friction thermal regime resulted in a several orders-of-magnitude reduction in the wear rate over those measured under standard thermal ramping conditions. Although the results confirm previous findings that Si is not a good material of construction for miniaturized moving mechanical assemblies (e.g., microbearings and gears), there seems to be some limited possibility of gas-phase lubrication of Si micromechanisms with rarefied hydrogen at surface temperatures between 100 and 300^°C. This revised version was published online in July 2006 with corrections to the Cover Date.     

铝复合变质处理对M_2铸造高速钢的影响

Ｍ２铸造高速钢加铝复合变质处理后，可减小Ｗ，Ｍｏ元素偏析，加大Ｃｒ元素偏析，改善铸态与热处理后组织中共晶碳化物的形态和分布，提高机械性能。     

1000kV特高压交流输电线路设计中的电磁环境问题

针对途径山东境内第一条特高压交流线路,重点讨论特高压架空输电线路设计中的电磁环境问题,同时给出电磁环境要求下的线路走廊宽度及邻近或跨越房屋时的对地距离,可为设计和运行单位提供参考。