高速混合法在共混地膜生产中的应用

介绍了在原有吹制LDPE地膜设备上(挤出机长径比为20:1)吹制LDPE、LLDPE和HDPE共混微膜和超薄微膜,采用高速混合法的混料工艺达到了良好的预热效果,弥补了挤出机长径比小的不足。     

Dynamic compensation by fusing a high-speed actuator and high-speed visual feedback with its application to fast peg-and-hole alignment

This paper presents a dynamic compensation concept to grapple with the dynamic defects of a traditional robot arm, especially while performing high-speed endpoint regulations. The proposed high-speed dynamic compensation concept offers a new point of view for cooperating with a traditional manipulator to realize highly dexterous performance of manipulations. The concept is realized through adoption of a high-speed light-weight actuator as well as endpoint closed loop configured high-speed cameras. The dynamic compensation is analyzed experimentally with 1000 Hz visual feedback and a high-speed finger for a robot arm in the case of one degree of freedom. The advantage of the proposed approach is that the modeling for the robot system’s dynamics is not needed, whereas it is necessary and trivial in order to realize high-speed regulations by traditional approaches. Thus, the control issue becomes easier with the proposed approach. As an application for this concept, fast peg-and-hole alignment with large position and attitude uncertainty is studied. The alignment algorithm is based on a visual compliance strategy. Alignment experiments show that with the proposed concept of dynamic compensation as well as visual compliant motion control, robust and fast convergence was realized for most cases.     

高速以太网中实时相似性匹配算法的研究

在高速以太网中, 针对用户行为的特殊性及数据流五元组的特点, 提出了一种自适应相似性匹配算法(ASMA-HN)。该算法充分考虑了数据流五元组的随机性分布特点, 通过一种改进的XOR-SHIFT算法将数据流分类索引, 并提出了同类数据库(SD)及异类数据库(HD)的概念, 基于距离测度分别设计了加权相似性比较函数, 使得特征值能更精准地匹配到符合要求的数据文件, 提高了整体的匹配效率。通过对校园网实际流量的现场测试, 证明该算法具有较高的精准性及可适用性, 且匹配时间较低, 能很好地满足高速网络中相似性匹配业务的需求。     

HiSLIP协议的研究与应用

为解决无LAN口仪器仪表网络接入问题,仪器的网络代理应运而生。当前网络代理的仪器控制机制主要基于TCP/UDP协议,仪器控制及网络传输数据效率较低,为此,IVI联盟制定了标准的仪器控制协议HiSLIP。通过对该协议的功能和交互过程的详细分析,根据协议规范实现协议的运行代码,并基于此协议设计出仪器网络代理,可以实现对支持VXI仪器的便捷网络接入和高效控制,降低通信时延和网络带宽对仪器测量的影响,满足网络化测控系统中对仪器实时性的要求。     

不同制备方法所得PEN纤维的结构性能比较

利用高速纺丝法与纺丝拉伸一步法两种不同的方法制备聚萘二甲酸乙二酯 ( PEN)纤维 ,以DSC、X射线衍射、声速、力学测试等手段分析其结构、热学及力学性能并进行比较。结果表明 :以上两种纺丝法所制备 PEN纤维的晶型、晶粒尺寸不同 ;在所采用的高速纺丝速度范围内 ,分别以 6,7,8km/m in的速度纺制的试样结构性能基本相同 ;而纺丝拉伸一步法中不同的拉伸倍数对纤维的取向度影响较大 ,进而使杨氏模量、断裂强度和断裂伸长率变化较大     

基于STeC的高速列车运行模型与算法

为了使高速列车正点运行到达目的车站,提出了基于STeC(时空一致性)语言的高速列车运行模型与算法。该模型具有位置触发自动调整高速列车运行的特点,实现动态确定高速列车制动点并保证列车正点到达目的车站,从而满足了高速列车运行实时系统对时间和空间的一致性要求。通过Matlab/Simulink的仿真测试,证明了该模型的正确性和有效性。     

我国水合肼和ADC发泡剂生产现状及需碱量预测

介绍了我国水合肼和ＡＤＣ发泡剂的生产现状，预测了这两种产品所需的耗碱量。     

Accurate High-speed Assembly of Optical Components in Optical Scanning Systems using UV-curing Adhesives: A Positional and Stability Study

In the miniaturized designs of optical scanning systems, UV-curing adhesives have been substituted for screws and bolts. The assembly of delicate optical components enforces stringent requirements on positional accuracy and stability after temperature and humidity cycle testing. The influence of the UV-curing adhesive is mainly determined by its polymerization shrinkage (typically more than 6%). With low amounts of Aerosil® fillers (5% by weight), shrinkage values of 3% can be attained. Optimized adhesive constructions lead to close positional tolerances (0.5 μm) and angular displacements (0.1 mrad).     

Deformation simulation of low-temperature high-speed extrusion for 6063 Al alloy

The hot compression test of 6063 Al alloy was performed on a Gleeble-1500 thermo-simulation machine, and the forming of 6063 rod extrudate in low-temperature high-speed extrusion was simulated with extrusion ratio of 25 on the platform of DEFORM 2D successfully. From the compression experimental results, the flow stress model of this Al alloy is obtained which could be the constitutive equation in the simulation of low-temperature high-speed extrusion process. From the numerical simulation results, there is a higher strain concentration at the entrance of the die and the exit temperature reaches up to 522 °C in low-temperature high-speed extrusion, which approaches to the quenching temperature of the 6063 Al alloy. The results show that the low-temperature high-speed extrusion method as a promsing one can reduce energy consumption effectively.     

补骨脂素和异补骨脂素的分离纯化研究

应用高速逆流色谱技术分离和纯化补骨脂中香豆素类成分补骨脂素和异补骨脂素．以补骨脂干燥成熟果实为原料,经乙醇回流制备补骨脂粗提物,经高速逆流色谱分离,所得样品由高效液相色谱检测纯度,并由对照品确定成分．采用正己烷．乙酸乙酯-甲醇-水（7：3：5：5）作为两相溶剂体系,从补骨脂粗提物中分离得到补骨脂素和异补骨脂素,二者纯度分别达到99．4％,99．1％．该法可以成功用于补骨脂粗提物中补骨脂素和异补骨脂素的分离,并且具有制备量大和分离效率高的优点．