High performance wood composites from highly filled polybenzoxazine

Highly filled systems prepared by compression molding of Hevea brasiliensis woodflour filled polybenzoxazine composites with high mechanical properties and reduced water uptake has been developed. The effects of percent filler content and particle size of woodflour on the obtained composite's properties were examined. The low melt viscosity of BA‐a type polybenzoxazine allows substantial amount of woodflour to be easily incorporated into the composites. The results showed that mechanical properties from dynamic mechanical analysis and flexural test at filler content below the optimum filler packing show approximately linear relationship with filler loading. The outstanding compatibility between the woodflour and the polybenzoxazine matrix is evidently seen from the large improvement in the composite's T_g and char yield. Scanning electron micrographs of the composite also reveals substantially strong interface between the woodflour filler and the polybenzoxazine matrix. Water absorption of the composites is greatly reduced with increasing the amount of polybenzoxazine due to the inherent low water absorption of the matrix. The polybenzoxazine is; therefore, a highly attractive candidate as high performance lignocellulosic binder or adhesive and other related applications. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1240–1253, 2006     

Electrodeposition of Pd–Ag alloy nanowires on highly oriented pyrolytic graphite

This paper reports findings of an investigation of Pd–Ag alloy nanowires on the step edges of highly oriented pyrolytic graphite (HOPG) by electrochemical deposition at room temperature. Scanning electron microscopy (SEM) images reveal that these alloy nanowires (109–430 nm) are uniform in diameter, and have lengths up to 100–500 μm. The electrodeposition process involves the initial formation of nanowires induced at the step edges of the oxidized HOPG substrate at a very negative potential and subsequent growth at a constant low current density to coalesce the discontinuous nanowires. Alloy nanowires with a 20–25% silver content can be obtained when the ratio of Pd and Ag in the solution is carefully controlled. The SEM images demonstrate that the alloy nanowire arrays are continuous, parallel, ordered, well-aligned and have a narrow distribution of diameters. The Pd–Ag alloy nanowire arrays are promising materials for fabricating hydrogen nanosensors.     

高效优势降解菌处理樟脑废水

针对樟脑废水,从活性污泥中筛选出降解樟脑废水的高效优势菌,通过分离纯化,优选出3株适应能力强、生长旺盛的菌株,分别为ZH-1、ZH-2、TZH-2。经初步鉴定分别为动胶菌属、假单胞菌属、短杆菌属。试验测定了樟脑混合菌最佳生长条件的优化组合为:葡萄糖质量浓度20 g.L-1,温度30℃,pH值为7,转速为125 r.m in-1,培养时间55 h。并测定了单株菌和混合菌对樟脑废水的降解效果,结果表明混合菌的降解效果最为明显,降解率为75.23%。     

资讯类新闻套图系统

考虑到图片具有对事件诠释力强,传播便利的特点,研究了从大量数据密集的新闻Web页面中自动提取数据,并组织成套图结构展现给用户。基于页面模板实现动态页面抽取和解析,处理转换为对应的套图数据结构。基于余弦相关性对来自不同网站的新闻套图数据进行去重,并根据相应的标准,为数据集进行评分排序。考虑巨大的新闻数据和用户数量,本系统基于hadoop分布式平台,满足系统的高可扩展性。本文将详细描述我们的系统设计和实现,并公布在百度资讯图片栏目上的运行结果。     

改进型Boussinesq方程高精度紧致差分显格式

采用一种高精度的紧致差分显格式对改进型Boussinesq方程进行数值求解;采用具有TVD性质的三阶Runge-Kutta方法进行预报,用三次样条函数进行校正,时间精度可达到四阶;在空间离散上采用六阶精度的三点紧致显格式进行计算;运用以上数值格式对Beji和Nadaoka改进型Boussinesq方程进行了求解,求解证明:高精度的数值结果和已知的试验结果吻合良好.作为验证算例,同时对波浪在台阶上的传播进行了模拟,从效果对比上可以看出,所得结果明显比Kittitanasuan的计算结果更靠近试验值.     

Complex formation in a ternary system composed of lauroamphoglycinate, oleic acid, and water

The formation of a complex, composed of lauroamphoglycinate (LG), oleic acid (OA) and water, was investigated, and this system was applied to emulsification. The complex was formed in the water-rich area (more than 90% in this system) at a molar ratio of OA to LG from 1 to 3, where two-phase systems of water and the complex existed. The interaction between LG and OA, both in the aqueous solution and at the interface of liquid paraffin dissolving the OA and LG solution, was studied by pH measurements and interfacial tension measurements, respectively. The results implied that LG and OA were linked stoichiometrically, both in aqueous solution and at the interface, and formed complexes. X-ray diffraction patterns and the strong hydrophobicity showed that the equimolar complex composed of LG, OA, and water was a liquid crystal with a reversed hexagonal structure. The reversed hexagonal liquid crystal was capable of solubilizing a certain amount of liquid paraffin in its alkyl group parts while maintaining its hexagonal structure. These results suggest the possibility to prepare a W/O-type emulsion by using the liquid crystal formed by LG, OA, partial liquid paraffin, and water as the continuous phase. The authors could obtain a stable W/O emulsion without coalescence of the water droplets that contained a substantial amount of water (approximately 90%). Furthermore, various types of emulsions, O/W, W/O, W/O/W, could be prepared by changing the ratio of LG and OA.     

深井裸眼封隔器分段酸压管柱打捞实践

安岳气田灯影组气藏广泛采用大斜度井/水平井裸眼封隔器分段酸压工艺试油完井,悬挂封隔器及下部管柱被“永久性”留在井下。如果利用原裸眼侧钻,则需要打捞分段酸压管柱至套管鞋以下30 m左右。MX126井和GS121井前期打捞作业历时均超过50 d,打捞效率非常低,主要原因为：悬挂封隔器双向锚定,裸眼封隔器和连接油管埋卡严重且位于大斜度井段,压井后长时间静止埋卡越来越严重;钻井液压井后切割油管受阻,没有完成落鱼切割分段;套磨铣导致封隔器解体,倒扣时落鱼出现多处退扣,倒扣打捞效率低。针对上述问题,优化了打捞技术措施：钻井液压井前,采用泵送径向切割工艺在清水中切割油管,确保切割成功率;采用带压拔出插管循环压井,缩短钻井液浸泡时间,降低次生卡钻风险;优选磨铣工具和打捞工具,优化磨铣工艺和震击解卡打捞工艺,维持落鱼完整性、力求捞出整段被切割落鱼。该技术成功应用于MX146井和GS127井后期的打捞作业,分别用时12 d和5 d。该技术可以显著提高裸眼封隔器分段酸压管柱的打捞效率,具有推广应用价值。     

Study of filtered interphase heat transfer using highly resolved CFD–DEM simulations

Accurately predicting the complex inhomogeneous heat transfer behavior in gas–solid fluidized beds is of fundamental importance. In this work, we constitute an enhanced filtered interphase heat transfer coefficient (IHTC) closure by systematically filtering the dataset from highly resolved three-dimensional (3D) computational fluid dynamics–discrete element model simulations. Particularly, effects of several potential filtered variable markers on filtered IHTC predictions are examined by statistical analysis. We reveal the formulated filtered IHTC correction closure manifests a systematic dependence on filtered interphase temperature difference as an additional marker. The proposed closure shows good agreement with the filtered fine-grid simulation data in an a priori analysis. Moreover, the difference of filtered IHTC corrections deduced from 3D Euler–Euler and Euler–Lagrange simulations is quantified. Finally, the comparative analysis between our proposed filtered IHTC formulation and those in literature is implemented. This work holds a potential to facilitate the development of thermal gas–solid flow modeling.     

纳米晶体Ni－P合金晶粒微观结构的研究

采用非晶晶化法制备出晶粒尺寸不同的Ｎｉ－Ｐ合金复相纳米晶体样品。利用Ｘ射线衍射技术分别对样品中Ｎｉ固溶体和Ｎｉ_３Ｐ的晶格参数随晶粒尺寸的变化进行了测试，发现在Ｎｉ固溶体纳米相中Ｐ的固溶浓度增大，约为平衡固溶度的１０－１５倍，形成超过饱和固溶晶格结构；在Ｎｉ_３Ｐ化合物纳米相中空位浓度增加导致晶格畸变发生，而且随晶粒尺寸减小晶格畸变程度增大。     

硬质合金金刚石涂层工具基体前处理有效方法探讨

利用两种溶液浸蚀硬质合金表面，分别选择性刻蚀WC和Co.这不仅强粗化了硬质合金表面，而且，还能抑制CO在金刚石沉积过程中的负作用，从,而，提高了金刚石薄膜的质量和涂层的附着力。