热卷箱是提高热连轧线竞争能力的最佳选择

介绍了热卷箱技术的发展及在我国的应用情况。结合“双工位无芯卷取”热卷箱技术在宝钢集团梅山钢铁公司1422mm热轧厂的成功应用，重点介绍了该技术的特点及在解决热轧板带中节能减排、减少氧化铁皮、避免甩尾、稳定精轧轧制及开发高附加值产品等方面的优势；认为其是提高热轧板厂竞争力的最佳选择。     

Effects of SO2 and SO3 on the Na2SO4 induced corrosion of nickel

The effects of SO₂ and SO₃ in the environment on the hot corrosion behavior of Ni in the temperature range 750–950°C has been studied. Below the melting point of Na₂SO₄ (884°C), rapid corrosion takes place by formation of a Na₂SO₄-NiSO₄ melt, which can penetrate the porous oxide scale and give rise to sulfide information by coming in contact with the metal. The distribution of the sulfides depends on the SO₂ level in the ambient gas. Continued corrosion occurs by a sulfidation-oxidation mechanism. At temperatures above the melting point of Na₂SO₄, accelerated degradation occurs via dissolution of the surface scale, followed by reprecipitation of the oxide in a nonprotective form.Deceased     

Na2SO4- and NaCl-Induced hot corrosion of six nickel-base superalloys

The short-time hot-corrosion behavior of six industrial nickel-base superalloys was investigated with static deposits of Na₂SO₄ or NaCl or both in still air. The oxidation kinetics and scale morphologies were measured with traditional laboratory techniques-thermobalance, metallography, electron microprobe, and x-ray analyses. Susceptibility to hot corrosion was found to be correlated to the type of scale produced during simple oxidation. Alloys forming an A1₂O₃ scale were found to be susceptible to Na₂SO₄ deposits, independent of their chromium content. The quantity of Na₂SO₄ deposit dictated the nature of the attack and, under certain conditions, the refractory element alloy additions appeared to play an essential role. Alloys containing Cr₂O₃ or TiO₂ in the simple oxidation scale proved to be sensitive to NaCl attack. Again, the severity of the attack within the susceptible alloy group was not related to the chromium or titanium content. Although less intensive than the Na₂SO₄ -induced hot corrosion, NaCl contaminations provoked extensive spalling. All of the hotcorrosion types encountered in this study were interpreted in the light of existing theories.Supported by the Délégation Générale à la Recherche Scientifique et Technique.     

哈夫曼树的异构部分重复码构造

针对分布式存储系统中数据被访问频率的不同,提出一种基于哈夫曼树的可变重复度的异构部分重复(HVFR)码,将不同访问频率的数据块作为哈夫曼树带有确定权值的叶子节点,构造哈夫曼树并确定数据块的重复度,利用成对平衡设计构造异构部分的重复码,能够提高热数据的并行访问速度和系统存储效率. 性能分析和实验结果表明,与里所码以及简单再生码相比,HVFR码可以显著减少故障节点的修复时间及修复局部性,提高热数据的并行访问速度,达到负载均衡,且计算复杂度低.     

热压烧结Ti3AlC2材料的制备、结构与性能研究

采用热压工艺研究了不同工艺制度和原料中不同的Si含量对Ti3AlC2合成的影响.研究表明在1 300℃～1 500℃,30MPa压力和Ar气氛中热压摩尔比为n(TiC)n(Ti)n(Al)n(Si)=2110.2的混合粉末,可以得到纯度达98%(质量分数)以上的致密块体Ti3AlC2材料;添加的Si均匀分布在基体中,形成固溶体,当添加Si的摩尔比为0.2时,固溶体的化学式为Ti2 76Al0 78Si0.22C2.烧结试样的晶体为层片状结构,1 300℃和1 400℃时,烧结试样的晶粒尺寸分别为10μm～15μm和20μm～30μm.材料的维氏硬度为3.3 GPa～5.0 GPa,弹性模量为289 GPa,抗压强度为785 MPa,抗弯强度为375 MPa,断裂韧性为7.0 MPa·m1/2;25℃时,电导率为3.1×106 S·m-1,热容为125.4 J/mol·K,热导率为27.5 W/m·K;热膨胀系数为8.8×10-6 K-1.     

铸钢件准固态区域应力,应变数值模拟及热裂机制

对ＺＧ４５实验热裂试棒的数种工况进行了应力－应变的数值模拟，对热裂形成机制进行了讨论。研究认为：热裂起源于Ｂｉｎｇｈａｍ体，是塑性变形超过Ｂｉｎｇｈａｍ体塑性储备值所致。     

Deciphering the Binding Interactions between Acinetobacter baumannii ACP and β-ketoacyl ACP Synthase III to Improve Antibiotic Targeting Using NMR Spectroscopy

Fatty acid synthesis is essential for bacterial viability. Thus, fatty acid synthases (FASs) represent effective targets for antibiotics. Nevertheless, multidrug-resistant bacteria, including the human opportunistic bacteria, Acinetobacter baumannii, are emerging threats. Meanwhile, the FAS pathway of A. baumannii is relatively unexplored. Considering that acyl carrier protein (ACP) has an important role in the delivery of fatty acyl intermediates to other FAS enzymes, we elucidated the solution structure of A. baumannii ACP (AbACP) and, using NMR spectroscopy, investigated its interactions with β-ketoacyl ACP synthase III (AbKAS III), which initiates fatty acid elongation. The results show that AbACP comprises four helices, while Ca²⁺ reduces the electrostatic repulsion between acid residues, and the unconserved F47 plays a key role in thermal stability. Moreover, AbACP exhibits flexibility near the hydrophobic cavity entrance from D59 to T65, as well as in the α₁α₂ loop region. Further, F29 and A69 participate in slow exchanges, which may be related to shuttling of the growing acyl chain. Additionally, electrostatic interactions occur between the α₂ and α₃-helix of ACP and AbKAS III, while the hydrophobic interactions through the ACP α₂-helix are seemingly important. Our study provides insights for development of potent antibiotics capable of inhibiting A. baumannii FAS protein–protein interactions.     

铈基SCR脱硝催化剂研究进展

近年来铈（Ce）基脱硝催化剂成为低温脱硝领域的研究热点,按载体类型可分为金属氧化物催化剂、二氧化钛载体催化剂、分子筛载体催化剂、活性炭及氧化铝载体催化剂等。按催化剂种类分别介绍了掺杂改性、制备工艺、反应条件等对催化剂性能的影响,并阐述了可能的原因机理。目前,铈基催化剂大多处于实验室阶段,工业化应用尚存在问题,尤其作为低温脱硝催化剂,活性中心堵塞问题更加突出,并且催化剂成本较高。未来可从催化剂制备工艺入手解决催化剂成型问题,以实现工业应用。同时探讨催化剂中毒机理,进一步提升其抗中毒能力。另外,寻求适宜的材料与铈掺杂组合,达到高效脱硝和经济效益最大化。     

2010年至2019年中国国家自然科学基金资助中国盐湖研究项目分析

国家自然科学基金对学科发展具有扶持、引导作用, 其资助情况能反映出学科发展态势、研究前沿和热点。以2010—2019年国家自然科学基金对盐湖研究的资助项目数据为分析对象, 利用EXCEL、R Studio、VOSviewer等软件对资助年度、资助金额、依托单位、资助类别、项目名称、关键词等内容进行统计分析, 揭示了国家自然科学基金对盐湖基础研究的资助力度、趋势、研究团队分布, 发现当前盐湖热点研究方向包括盐湖相化学与溶液化学、盐湖资源分离与利用技术、盐湖资源综合利用技术、盐湖成盐规律与机制、盐湖锂资源利用技术、盐湖化学性质研究。     

NiFeAlO4载氧体制备及煤化学链燃烧反应特性

铁基载氧体是一种具有工业应用前景的载氧体,但存在氧利用率低、在高温下易烧结等问题。虽可通过制备双金属复合载氧体或添加惰性组分改进其性能,但均存在一定缺陷。若将活性组分和惰性材料融入到一个晶体结构制备尖晶石结构载氧体,则可实现利用双金属协同作用提高载氧体活性的同时,利用Al3+提高载氧体的稳定性。采用共沉淀法和溶胶凝胶法制备了具有尖晶石结构的NiFeAlO₄载氧体,考察了制备方法、载氧体与煤质量比对NiFeAlO₄载氧体化学链燃烧特性和循环稳定性的影响,并分析了载氧体对煤转化过程的作用。结果表明,溶胶凝胶法制备的NiFeAlO₄载氧体具有更好的反应性,载氧体与煤质量比为20∶1时,碳转化率为86.7%,远高于煤单独热解时的碳转化率(34%),此时CO₂体积分数为93.6%。对反应前后NiFeAlO₄载氧体晶相结构和形貌进行分析,表明循环过程中经“还原-氧化”后生成的NiO和载氧体颗粒团聚是导致载氧体活性下降的主要原因。相较于载热作用,NiFeAlO₄载氧体在煤化学链燃烧中主要起供氧作用,其不仅会促进挥发分向煤气的转化,且NiFeAlO₄载氧体与焦炭之间也存在固-固反应,利于更多CO₂的生成。