Electrochemical characteristics for redox systems at nano-honeycomb diamond

Electrochemical characteristics for several redox systems at diamond films with highly ordered nanometer-scale cylindrical pores (‘nano-honeycombs’) were examined with cyclic voltammetry (CV) and electrochemical impedance measurements. The cyclic voltammetric anodic-cathodic peak separations for these nano-honeycomb electrodes were in the same range as those for polished polycrystalline diamond films, indicating that the involvement of the oxygen-terminated surface of the nano-pore walls, which should give rise to large peak separations for certain redox couples was only slight. Moreover, the peak currents in the CV were not enhanced to the extent expected on the basis of the roughness factors of the nano-honeycomb films. Ac impedance plots results indicated the existence of a concentration gradient of the reactant in the nano-pores, which is in agreement with theoretical predictions for charge transfer reactions in porous electrodes. The average concentration of the reactant (Fe^2+/3+) inside the nano-pores was a factor of ca. 80 lower than that in the bulk electrolyte. The results of the impedance analysis also indicated an increase in the reaction resistances with decreasing pore diameters.     

OptaDOS: A tool for obtaining density of states,core-level and optical spectra from electronic structure codes

We present OptaDOS, a program for calculating core-electron and low-loss electron energy loss spectra (EELS) and optical spectra along with total-, projected- and joint-density of electronic states (DOS) from single-particle eigenenergies and dipole transition coefficients. Energy-loss spectroscopy is an important tool for probing bonding within a material. Interpreting these spectra can be aided by first principles calculations. The spectra are generated from the eigenenergies through integration over the Brillouin zone. An important feature of this code is that this integration is performed using a choice of adaptive or linear extrapolation broadening methods which we show produces higher accuracy spectra than standard fixed-width Gaussian broadening. OptaDOS  may be straightforwardly interfaced to any electronic structure code. OptaDOS  is freely available under the GNU General Public licence from http://www.optados.org.     

Kinetics of hydrogen evolution on submicron size Co, Ni, Pd and Co–Ni alloy powder electrodes by d.c. polarization and a.c. impedance studies

Submicron size Co, Ni and Co–Ni alloy powders have been synthesized by the polyol method using the corresponding metal malonates and Pd powder by reduction of PdO _x in methanol. The kinetics of the hydrogen evolution reaction (HER) in 6 M KOH electrolyte have been studied on electrodes made from the pressed powders. The d.c. polarization measurements have resulted in a value close to 120 mV decade^–1 for the Tafel slope, suggesting that the HER follows the Volmer–Heyrovsky mechanism. The values of exchange current density (i _o) are in the range 1–10 mA cm^–2 for electrodes fabricated in the study. The a.c. impedance spectra measured at several potentials in the HER region showed a single semicircle in the Nyquist plots. Exchange current density (i _o) and energy transfer coefficient () have been calculated by employing a nonlinear least square-fitting program.     

Cuticular hydrocarbons ofReticulitermes virginicus (Banks) and their role as potential species- and caste-recognition cues

The cuticular hydrocarbon components of four castes ofReticulitermes virginicus (Banks) have been identified and quantitated. Components identified includen-alkanes; 2-, 3-, 11-, 13-, and 15-methyl-alkanes; 11,15-dimethylalkanes, (Z)-9-alkenes; (Z,Z)-7,9-dienes; and (E/Z)-6,9-dienes ranging in carbon number from C₂₁ to C₄₀. All caste forms ofR.virginicus contained the same components, but showed caste-specific proportions. Comparison of these hydrocarbons with those of the sympatric termiteR. flavipes (Kollar) suggest that cuticular hydrocarbons might serve as species- and caste-recognition cues. A bioassay was developed to test this species-recognition hypothesis, with the experimental results supporting the hypothesis.Isoptera: Rhinotermitidae.     

双电层电容器用沥青焦基活性炭的制备工艺条件对其孔结构及电化学性能的影响

以沥青焦为原料，KOH为活化剂在不同的工艺条件下制备了双层电容器用活性炭电极材料。分别考察了活化剂用量、活化时间、以及加入Cu、Ni催化活化等工艺条件对活性炭孔结构及作为双电层电容器电极的电化学性能的影响。结果表明：在实验范围内增加KOH用量及活化时间，活性炭的比表面积和比电容增加，比电容最高达到247F／g。添加Cu、Ni催化活化后活性炭的比表面积及比电容增加，高功率放电性能明显改善。     

Cuticular lipids of the booklouse,Liposcelis bostrychophila: hydrocarbons,aldehydes, fatty acids,and fatty acid amides

The booklouse, Liposcelis bostrychophila, is an increasingly common pest of stored food products worldwide. We report here the cuticular lipid composition of this pest (the first report of the hydrocarbons of any member of the Order Psocoptera and the first report of fatty acid amides as cuticular components for any insect). No unsaturated hydrocarbons were present. A homologous series of n-alkanes (C₂₁–C₃₄), monomethyl alkanes (3-, 4-, 5-, 7-, 9-, 11-, 12-, 13- and 15-methyl-) with a carbon chain range of C₂₈–C₄₂, and dimethyl alkanes (3, 7-; 9, 13-; 11, 15-; 13, 17-; 9, 21-; 11, 19-; and 13, 21-); with a carbon number range of C₃₁–C₄₃ were identified. The relative abundances of these hydrocarbons were low, comprising approximately 0.0125% of total biomass. The amides were a homologous series (C₁₆–C₂₂ in chain length), with the major amide being stearoyl amide. In addition to the amides, free fatty acids (C_16:1, C_16:0, C_18:2, C_18:1, and C_18:0 in chain length) and three straight chain aldehydes (C₁₅, C₁₆, and C_17:1 in chain length) also occurred as cuticular components. These findings are discussed in terms of the chemical and physiological ecology of this species.     

Electrochemical and spectroscopic evidences of corrosion inhibition of bronze by a triazole derivative

The electrochemical behavior of the bronze (Cu-8Sn in wt%) was investigated in 3% NaCl aqueous solution, in presence and in absence of a corrosion inhibitor, the 3-phenyl-1,2,4-triazole-5-thione (PTS). The inhibiting effect of the PTS was evidenced for concentrations higher than 1 mM for the cathodic process whereas its effect was clearly seen with a concentration as low as 0.1 mM for the anodic process. A significant positive shift of the corrosion potential was also observed, and its inhibiting effect increased with both its concentration and the immersion time of the sample. From voltammetry and electrochemical impedance spectroscopy experiments, the inhibiting efficiency of the PTS was found to be in the 94-99% range for 1 mM concentration. Scanning electron microscopy and X-ray energy dispersion analysis of the specimen surface show the presence of sulphur on the surface. Raman micro-spectrometry study confirms the protective effect of the PTS in aqueous solution through three types of interactions with the electrode, namely the adsorption of the inhibitor in a flat configuration, the formation of copper-thiol molecules, and when copper is released, the formation of a polymeric complex.     

Model reference adaptive impedance control in Cartesian coordinates for physical human–robot interaction

In this paper, a nonlinear model reference adaptive impedance controller is proposed and tested. The controller provides asymptotic tracking of a reference impedance model for the robot end-effector in Cartesian coordinates applicable to rehabilitation robotics or any other human–robot interactions such as haptic systems. The controller uses the parameters of a desired stable reference model which is the target impedance for the robot’s end-effector. It also considers uncertainties in the model parameters of the robot. The asymptotic tracking is proven using Lyapunov stability theorem. Moreover, the adaptation law is proposed in joint space for reducing the complexity of its calculations; however, the controller and the stability proof are all presented in Cartesian coordinates. Using simulations and experiments on a two DOFs robot, the effectiveness of the proposed controller is investigated.     

Development and characterization of silicone/phosphorus modified epoxy materials and their application as anticorrosion and antifouling coatings

Epoxy resin is chosen for our present study owing to its exceptional combination of properties such as easy processing, high safety, excellent solvent and chemical resistance, toughness, low shrinkage on cure, good electrical, mechanical and corrosion resistance with excellent adhesion to many substrates. This versatility in formulation made epoxy resins widely applied for surface coatings, adhesives, laminates, composites, potting, painting materials, encapsulant for semiconductor and insulating material for electric devices. There are numerous paint/coating systems based on epoxy resin available for corrosion and fouling prevention. They however are not completely satisfactory in field applications, where high corrosion, fouling and flame resistance are required. The demand for epoxy resin as corrosion/fouling resistant coatings is restricted mainly due to its inferior characteristics like poor impact strength, high rigidity, and moisture absorbing nature besides inadequate flame retardant properties. It is for this reason that silicones and phosphorus-based compounds are used as modifier in this work by intercrosslinking network mechanism (ICN) to obtain epoxy resin with desired properties ideally suitable for field applications for preventing corrosion and fouling with flame retardantancy. The present work involves the development of solvent free silicone/phosphorus modified epoxy coating systems, since solvent free coating systems are widely used for numerous applications due to their lower cost per unit film thickness, freedom from fire and pollution hazard and ability to provide better performance. For the development of coating systems, epoxy resin (X) serves as base material, hydroxyl terminated polydimethylsiloxane (HTPDMS) as modifier, γ-aminopropyltriethoxysilane (γ-APS) as crosslinking agent and dibutyltindilaurate (DBTDL) as catalyst. Polyamidoamine (A), aromatic amine adducts (B) and phosphorus-containing diamine (C) were used as curing agents. The study also describes the evaluation of corrosion resistant behaviour of unmodified epoxy and siliconized epoxy coatings by potentiodynamic polarization method, electrochemical impedance spectroscopy (EIS), salt-spray and antifouling tests. The results are discussed.