一种协调的科技文献分类方法

科技文献之间的相互引证关系反映了一种科学交流活动,显示了科学文献之间(甚至是学科之间)的内在联系,而通过追溯文献之间的这种关系,可以改善和提高传统的基于内容的科技文献的分类的方法。论文利用有相互引证关系,有同引关系,以及有耦合关系的两篇文献一般是属于同一类的这一特点,提出了文献之间的引用相似度,同引相似度,耦合相似度这三个概念,再利用这三个概念生成了文献之间的“结构相似度”,并将它用于K-NN分类法中得出一种基于结构的分类法。最后,论文将这种基于结构的分类法和基于内容的NaveBayes分类法结合起来提出了一种新的协调分类法。     

甲醛与甲酸甲酯的偶联反应 Ⅰ.杂多酸的催化作用

研究了４种杂多酸（磷钨酸、硅钨酸、磷钼酸和硅钼酸）对甲醛和甲酸甲酯偶联反应的催化作用；对反应条件进行了考察。结果表明，磷钨酸和硅钨酸对该反应具有较高的催化活性；而氧化性强的钼系杂多酸的活性较低。水对甲醛和甲酸甲酯的偶联反应具有不利影响。将杂多酸在３００℃进行热处理后，其活性显著增强。     

甲烷氧化偶联中钙钛矿催化膜的研究进展

甲烷氧化偶联对充分利用天然气资源具有非常重要的意义 ,以钙钛矿催化膜为核心的催化技术最有希望实现这一过程的工业化。本文介绍了近几年来人们对钙钛矿催化膜的研究成果 ,指出了这一领域今后的发展重点。     

偶联剂处理硅灰石填充不饱和聚酯树脂的研究

对针状硅灰石 (L∶D≥ 10∶32 5目 )提纯后 ,采用偶联剂进行表面处理 ,将硅灰石按不同比例填充于不饱和聚酯树脂体系中 ,研究了材料的性能。结果表明 ,改性后的硅灰石可显著改善不饱和聚酯的性能。     

A Novel UWB Pulse Shape Modulation System

In this paper novel modified Hermite polynomial functions for use in impulse radio (ultra-wideband) communications are proposed. With these functions pulse shapes which are orthogonal and have nearly constant pulse width regardless of the pulse order are generated. These properties hold under the effects of differentiation. An M-ary communication system is constructed using these pulse shapes. A Matlab model for generating the pulses is designed and the effect of timing jitter on the performance of the system is investigated by computer simulation.     

关于混联梯级水电站经济调度的研究

提出采用具有附加线性约束的网络规划法，可把混联梯级水电站分解为几个子网络，简化了每个子网络的求解计算，从而加速大电网复杂的经济调度的计算速度。     

Effective single-band Hamiltonian for electron-phonon coupling in cuprate superconductors

We derive an effective single-band Hubbard type Hamiltonian for CuO₂ planes. The Hamiltonian includes both electron-electron repulsion and electron-phonon coupling to oxygen vibrational modes. We start with first-principles density functional theory parameters and then map onto a single-band model. Unlike previous mappings to a single-band Hamiltonian, ours explicitly preserves the Fermi surface shape and matrix elements of the many-band Hamiltonian. We consider both in-plane oxygen breathing modes as well as out-of-plane tilting modes. The latter modes have a quadratic electron-phonon coupling, and are also highly anharmonic in La₂CuO₄ based superconductors. The coupling to breathing modes is too small to account for highT _c, while the coupling to quadratic modes is much stronger even though they would be neglected in a standard Migdal-Eliashberg approach to superconductivity.     

高质量的一级光栅1．55μmDFB激光器

本文详细叙述了ＤＦＢ激光器的设计要点和新的工艺。采用一级全息光栅和二步液相外延法批量研制出高稳定单纵模工作的１．５５μｍ分布反馈激光器（ＤＦＢ—ＬＤ）。外延片成品率＞４０％。器件特性：２５℃时阈值电流２０ｍＡ，单面光功率＞１０ｍｗ，主边模抑制比ＳＭＳＲ达４３ｄＢ（λ／４相移光栅），谱线宽度△ν－２０ｄＢ＝０．３ｎｍ，调制速率＞１．８ＧＨｚ。可靠性测试显示：高温监测光谱稳定，２５°Ｃ时阈值退化率△Ｉｔｈ／ｔ＜０．３ｍＡ／ｋｈ，对应器件预估寿命将超过１０万ｈ。     

Trade-offs in scan path and BIST implementations for RAMs

In this article we propose efficient scan path and BIST schemes for RAMs. Tools for automatic generation of these schemes have been implemented. They reduce the design effort and thus allow the designer to select the more appropriate scheme with respect to various constraints.     

A numerical model for induction heating processes coupling electromagnetism and thermomechanics

This paper presents a mathematical and numerical model developed for coupling the various physical phenomena (electromagnetic, thermal and mechanical) taking place in axisymmetrical induction heating processes. All three electromagnetic, thermal and mechanical models are time dependent and take full account of the electromagnetic and thermal non‐linear effect especially with magnetic materials. The electromagnetic problem is discretized and solved in the workpiece, air and inductors. The heat transfer equation and the mechanical equilibrium equations are solved in the workpiece only, both using a finite element method. The mechanical model can take into account thermoelastic–plastic behaviour for the part. The model has been successfully applied to several cases of induction heating. Comparisons between numerical and experimental results show an excellent agreement. Copyright © 2003 John Wiley & Sons, Ltd.