Topological derivative-based technique for imaging thin inhomogeneities with few incident directions

Many non-iterative imaging algorithms require a large number of incident directions. Topological derivative-based imaging techniques can alleviate this problem, but lacks a theoretical background and a definite means of selecting the optimal incident directions. In this paper, we rigorously analyse the mathematical structure of a topological derivative imaging function, confirm why a small number of incident directions is sufficient, and explore the optimal configuration of these directions. To this end, we represent the topological derivative-based imaging function as an infinite series of Bessel functions of integer order of the first kind. Our analysis is supported by the results of numerical simulations.     

A portable stereo vision system for whole body surface imaging

This paper presents a whole body surface imaging system based on stereo vision technology. We have adopted a compact and economical configuration which involves only four stereo units to image the frontal and rear sides of the body. The success of the system depends on a stereo matching process that can effectively segment the body from the background in addition to recovering sufficient geometric details. For this purpose, we have developed a novel sub-pixel, dense stereo matching algorithm which includes two major phases. In the first phase, the foreground is accurately segmented with the help of a predefined virtual interface in the disparity space image, and a coarse disparity map is generated with block matching. In the second phase, local least squares matching is performed in combination with global optimization within a regularization framework, so as to ensure both accuracy and reliability. Our experimental results show that the system can realistically capture smooth and complete whole body shapes with high accuracy.     

Effect of axial and radial velocities on solids mass flow rate measurement

In coal powder flow transportation and combustion, powder mass flow rate is a key parameter to be monitored and controlled. Electrostatics is one of the techniques used for such task with its non-intrusive, robust, and low cost natures. The passive electrostatic meters measure charge induced on the detecting electrodes. As it is known that the induced signal is not only dependent on the solids mass flow rate, but also affected by solids velocity. However, the velocity of particles usually referred to is the axial velocity. In reality, the solids velocity is a vector, its projections in both the radial and tangential directions also need to be investigated. This paper analyses the dynamic sensitivity of ring-shaped electrostatic sensors using the finite element method (FEM), and investigates the influence of the axial and radial velocities on the induced signal on the electrodes.     

Evanescent wave sensor based on permanently bent single mode optical fiber

A novel refractive index sensing scheme based on evanescent wave interaction through locally and permanently bent single mode optical fibers is proposed. Local and permanent bends in single mode optical fibers enable significant power coupling between core and cladding modes. Order and number of excited cladding modes depend on bend features and determine the field profile at the output of the bent region. This in turn constitutes a simple mechanism to tailor the field distribution in single mode optical fibers useful for spatial light modulation. Moreover, since guided cladding modes are strongly influenced by the surrounding refractive index (SRI), the power transmitted at the output of the bent region as well as its dependence on the optical wavelength are strongly sensitive to the SRI opening new scenarios in sensing applications.     

Ordered mesoporous Pd/SnO2 synthesized by a nanocasting route for high hydrogen sensing performance

Ordered mesoporous SnO₂ and mesoporous Pd/SnO₂ have been successfully synthesized via nanocasting method using the hexagonal mesoporous SBA-15 as template. Two different procedures, impregnation technique and direct synthesis, were utilized for the doping of Pd in the mesoporous SnO₂. The results of small angle X-ray diffraction (SAXD), nitrogen adsorption–desorption and transmission electron microscopy (TEM) demonstrate that the SnO₂ and Pd/SnO₂ display ordered mesoporous structures and high surface areas. Wide angle X-ray diffraction (WAXD) and X-ray photoelectron spectroscopy (XPS) reveal tetragonal structure of SnO₂ and the existence of Pd element. The sensing properties of mesoporous SnO₂ and mesoporous Pd/SnO₂ for H₂ were detected. The sensor utilizing mesoporous Pd/SnO₂ via direct synthesis method exhibits excellent response and recovery behavior and much higher sensitivity to H₂, compared to those using mesoporous SnO₂ and mesoporous Pd/SnO₂ via impregnation technique. It is believed that its high gas sensing performance is derived from the large surface area, high activity and well dispersion of Pd additive, as well as high porosity, which lead to highly effective surface interaction between the target gas molecules and the surface active sites.     

Structural and properties of nanocrystalline WO3/TiO2-based humidity sensors elements prepared by high energy activation

Nanocrystalline WO₃/TiO₂-based powders have been prepared by the high energy activation method with WO₃ concentration ranging from 1 to 10 mol%. The samples were thermal treated in a microwave oven at 600 °C for 20 min and their structural and micro-structural characteristics were evaluated by X-ray diffraction, Raman spectroscopy, EXAFS measurements at the Ti K-edge, and transmission electron microscopy. Nitrogen adsorption isotherms and H₂ Temperature Programmed Reduction were also carried out for physical characterization. The crystallite and particle mean sizes ranged from 30 to 40 nm and from 100 to 190 nm, respectively. Good sensor response was obtained for samples with at least 5 mol% WO₃ activated for at least 80 min. Ceramics heat-treated in microwave oven for 20 min have shown similar sensor response as those prepared in conventional oven for 120 min, which is highly cost effective. These results indicate that WO₃/TiO₂ ceramics can be used as a humidity sensor element.     

无线光电定位网络的设计

为满足非接触化、小型化、集成化、数字化、智能化等现代检测技术的发展要求,从成本、工作原理、灵敏度等方面综合考虑,现采用以光电定位模块为核心的光电定位技术,以无线传感器网络作为数据传输与管理的技术手段,构建了无线光电定位网络,并进行了实验分析.可实现多点实时监测、异地显示测量数据、数据网络化管理等特殊需求;涵盖了多学科领...     

A fuzzy-based interleaved multi-hop authentication scheme in wireless sensor networks

In sensor networks, a compromised node can either generate fabricated reports with false votes or inject false votes into real reports, which causes severe damage such as false alarms, energy drain and information loss. An interleaved hop-by-hop authentication (IHA) scheme addresses the former attack by detecting and filtering false reports in a deterministic and hop-by-hop fashion. Unfortunately, in IHA, all en-route nodes must join to verify reports while only a few are necessary to the authentication procedure. In this paper, we propose a fuzzy-based interleaved multi-hop authentication scheme based on IHA. In our scheme, the fuzzy logic system only selects some nodes for verification based on the network characteristics. Moreover, we apply a voting method and a hash-based key assignment mechanism to improve network security. Through performance evaluation, the proposed scheme is found to save up to 13% of the energy consumption and to provide more network protection compared to IHA.