Filtered adaptive constrained sampled-data control for uncertain multivariable nonlinear systems

A filtered adaptive constrained sampled-data controller for uncertain multivariable nonlinear systems in the presence of various constraints is synthesized in this paper. A piecewise constant adaptive law drives that estimation error dynamics to zero at each sampling time instant yields adaptive parameters. The filtered control scheme consists of two components. Based on an estimation/cancellation strategy, a disturbance rejection control law is designed to compensate the nonlinear uncertainties within the bandwidth of low-pass filters, whereas a constraint violation avoidance control law is designed to solve an online constrained optimization problem. Although a reduced sampling time helps to minimize the estimation error caused by the neglect of unknowns, the resulting aggressive signals put more restrictions on the control law. Greater sacrifice of tracking performance is required to satisfy the constraints. The constraints violation avoidance control law is in favor of a larger sampling time. Sufficient conditions are given to guarantee the stability of the closed-loop system with the sampled-data controller, where the input/output signals are held constant over the sampling period. Numerical examples are provided to validate the theoretical results, comparisons between the constrained sampled-data controller and unconstrained adaptive controller with the implementation of different sampling times are carried out.     

Artificial bee colony based algorithm for maximum power point tracking (MPPT) for PV systems operating under partial shaded conditions

Artificial bee colony (ABC) algorithm has several characteristics that make it more attractive than other bio-inspired methods. Particularly, it is simple, it uses fewer control parameters and its convergence is independent of the initial conditions. In this paper, a novel artificial bee colony based maximum power point tracking algorithm (MPPT) is proposed. The developed algorithm, does not allow only overcoming the common drawback of the conventional MPPT methods, but it gives a simple and a robust MPPT scheme. A co-simulation methodology, combining Matlab/Simulink™ and Cadence/Pspice™, is used to verify the effectiveness of the proposed method and compare its performance, under dynamic weather conditions, with that of the Particle Swarm Optimization (PSO) based MPPT algorithm. Moreover, a laboratory setup has been realized and used to experimentally validate the proposed ABC-based MPPT algorithm. Simulation and experimental results have shown the satisfactory performance of the proposed approach.     

Study on maximum power point tracking of photovoltaic array in irregular shadow

Traditional maximum power point tracking (MPPT) methods can hardly find global maximum power point (MPP) because output characteristics curve of photovoltaic (PV) array may have multi local maximum power points in irregular shadow, and thus easily fall into the local maximum power point. To address this drawback, Considering that sliding mode variable structure (SMVS) control strategy have such advantages as simple structure, fast response and strong robustness, and P&O method have the advantages of simple principle and convenient implementation, so a new algorithm combining SMVS control method and P&O method is proposed, besides, PI controller is applied to reduce system chattering caused by switching sliding surface. It is applied to MPPT control of PV array in irregular shadow to solve the problem of multi-peak optimization in partial shadow. In order to verity the rationality of the proposed algorithm, the experimental circuit is built, which achieves MPPT control by means of the proposed algorithm and P&O method. The experimental results show that compared with the traditional P&O algorithm, the proposed algorithm can fast track the global MPP, tracking speed increases by 60% and the relative error decreased by 20%. Moreover, the system becomes more stable near the MPP, the fluctuations of output power is greatly reduced, and thus make full use of solar energy.     

Characterizing physical habitat preferences and thermal refuge occupancy of brook trout (Salvelinus fontinalis) and Atlantic salmon (Salmo salar) at high river temperatures

Anthropogenic influences, including climate change, are increasing river temperatures in northern and temperate regions and threatening the thermal habitats of native salmonids. When river temperatures exceed the tolerance levels of brook trout and Atlantic salmon, individuals exhibit behavioural thermoregulation by seeking out cold‐water refugia – often created by tributaries and groundwater discharge. Thermal infrared (TIR) imagery was used to map cold‐water anomalies along a 53 km reach of the Cains River, New Brunswick. Trout and salmon parr did not use all identified thermal anomalies as refugia during higher river temperature periods (>21°C). Most small‐bodied trout (8–30 cm) were observed in 80% of the thermal anomalies sampled. Large‐bodied trout (>35 cm) required a more specific set of physical habitat conditions for suitable refugia, that is, 100% of observed large trout used 30% of the anomalies sampled and required water depths >65 cm within or adjacent to the anomaly. Densities of trout were significantly higher within anomalies compared with areas of ambient river temperature. Salmon parr were less aligned with thermal anomalies at the observed temperatures, that is, 59% were found in 65% of the sampled anomalies; and densities were not significantly different within/ outside anomalies. Salmon parr appeared to aggregate at 27°C, and after several events over 27°C variability in aggregation behaviour was observed – some fish aggregated at 25°C, others did not. We stipulate this is due to variances of thermal fatigue. Habitat suitability curves were developed for velocity, temperature, depth, substrate, and deep water availability to characterize conditions preferred by fish during high‐temperature events. These findings are useful for managers as our climate warms, and can potentially be used as a tool to help conserve and enhance thermal refugia for brook trout and Atlantic salmon in similar systems.     

深度学习识别光网络单元故障的设计与应用

为解决依赖装维上门鉴别光网络单元故障带来的不便,可以从机器视觉入手实现自动化故障识别。近年,ImageNet挑战赛的成功推动了物体识别技术的跨越式发展,特别是基于卷积的深度学习技术在视觉识别方面已经达到人类水平,为光网络单元故障的自动识别提供了技术基础。文章对识别光网络单元的工作状态进行了研究,将设备工作状态分为7个场景,提出了利用手机APP采集图片识别故障的解决方案并投入了实际生产;重点阐述了深度学习模块的设计与实现,提出一种通过算法整合的方式综合运用物体检测和图像分类算法,分3阶段逐步求精,解决了图片过滤,光网络单元型号和状态识别等问题,实现了基于计算机视觉自动识别光网络单元故障。从数据上看产品的端到端准确率超过84%,识别速度达到10 FPS,月均提供服务超过1万人次,在减少用户等待的同时节约了人力资源。     

基于深度学习的视频跟踪研究进展综述

近年来深度学习迅猛发展，颠覆了语音识别、图像分类、文本理解等领域的算法设计思路。深度学习因其具备强大的特征提取能力，在图像识别领域的成绩尤为突出。然而深度学习与视频监控领域的结合并不多，由于深度模型具有多层网络结构，算法复杂度大，训练和更新模型时比较耗时，很难满足实时性要求。回顾了深度学习的发展史，介绍了最近10年来国内外深度学习主要模型，论述了基于深度学习的目标跟踪算法，指出了各算法的优缺点，最后对当前该领域存在的问题和发展前景进行了总结和展望。     

Passive target detection and tracking from electromagnetic field measurements

This paper presents a novel approach to the localization of moving targets in a complex environment based on the measurement of the perturbations induced by the target presence on an independently‐generated time‐varying electromagnetic field. Field perturbations are measured via a set of sensors deployed over the domain of interest and used to detect and track a possible target by resorting to a particle Bernoulli filter (PBF). To comply with real‐time operation, the PBF works along with an artificial neural network (ANN) model of the environment trained offline via finite elements (FEs). The performance of the proposed algorithm is assessed via simulation experiments.     

网络安全等级保护测评中测评结论的度量方法优化

文章分析了网络安全等级保护2.0时期国家标准的新变化对等级测评结论可能产生的影响,并用实际案例和数据论述了以往描述的基于测评指标和基于测评对象的定量分析方法存在的局限性。根据网络安全等级保护国家标准结构和内容的新特点,结合新的等级测评结论表述方法,文章提出了调整和优化定量计算产生等级测评结论的思路,给出了缺陷扣分的原理和缺陷扣分的定量计算方法,并比较了各种定量计算方法在计算结果上的差异,提出了适合新标准的测评结论定量计算公式。