多点多板多分型面注塑模具的简化设计

应用锁扣装置、组合拉杆结构，减少导柱数量，简化了多点多板多分型面注塑模具的设计。     

前大油田注水系统防腐防垢技术的研究

前大油田注水系统腐蚀、结垢问题十分突出,开发了适用于前大油田注水水质的JYSJ-Q型杀菌剂、JYHZJ-Q型缓蚀阻垢剂,并通过试验确定了配套加药工艺.经现场应用,有效缓解了注水系统的腐蚀结垢问题,获得了显著的社会效益及经济效益.     

按平均收缩率计算注塑模成型尺寸的公式修正

讨论了现用计算公式的缺陷及原因,提出4个修正公式,并举例说明了修正后公式对确定合理的模具公差和保证注塑件顺利生产的重要经济意义。     

注塑用聚氯乙烯干混粉料流变性能的研究

用国产注塑机直接采用聚氯乙烯(PVC)干混粉料注塑硬质聚氯乙烯(RPVC)管件是一个新课题。本文着重介绍在美国哈克(HAAKE)EU-5型转矩流变仪上筛选配方,对PVC干混粉料在加强稳定化、阻止热分解、改善加工性能和实现内外润滑的平衡等方面,进行初步探讨;同时结合生产实践,阐述了干混粉料的制备,机筒模具温度、塑化注塑压力等工艺全过程的控制条件,以及注塑管件在出现缺陷时的解决办法。     

汽车用塑料注塑新技术的进展

综述了汽车用塑料的注射成型技术的进展，简单介绍了气体辅助注射成型(GAIM)、水辅助注射成型、熔芯注射成型、反应注射／增强反应注射(RIM／RRIM)成型等技术的特点、生产的汽车部件及最新动向。     

专家系统在注塑模结构设计中的应用

介绍了知识库与推理机分离专家系统的原理及程序实现方法,并给出了专家系统的应用实例。     

Liquid-Phase Transport During Removal of Organic Binders in Injection-Molded Ceramics

A method has been developed for calculating hydraulic pressures induced by thermal expansion of liquid binders early in the removal cycle, when evaporative losses are negligible and fully saturated conditions prevail. Specific results were obtained for flat compacts containing a common wax binder, mixed with varying amounts of low-density polyethylne. In general, these results show how the risk of hydraulic fracture increases with heating rate and compact thickness. Although pressures are minimal when the binder consists entirely of wax, the continual addition of polyethylene eventually gives rise to unacceptable risk levels, even for relatively thin compacts. Binder removal at elevated temperatures is considered subsequently. In this case, vapor pressures eventually approach a critical level, thereby allowing mass removal by evaporation to overcome the effect of thermal expansion in maintaining full saturation. With the onset of void formation, the developing capillary pressure supersedes hydraulic pressure as the driving force in liquid transport. Besides representing capillary flow, the present formulation also accounts for thermal degradation of the binder during removal. The resulting system of equations was solved numerically for a variety of representative debinding conditions. Predictions for flat compact containing a balanced wax/polyethylene binder indicate that thermal degradation of the polyethylene can give rise to a marked improvement in debinding rates. It turns out, however, that this enhancement is far more effective in thinner compacts.     

Increasing urea-N efficiency for transplanted lowland rice by pneumatic injection: Yield and economics at the farm level

To increase the fertilizer-N efficiency in lowland rice (Oryza sativa L.) cultivation, new management practices are needed. Main cause of the present low efficiency is the low N recovery by plants, as a considerable part of the N applied is lost; deep placement techniques improve the recovery. A pneumatic injector, with which urea prills can be point-placed at a depth of 5–10 cm in paddy soils, was tested in 38 on-farm trials in 1989/90, mostly during the wet season. The experiments, located in Africa and Asia, focussed on differences in grain yield between conventional methods of broadcasting urea and injection by the pneumatic injector, at recommended N-rates. The study shows that the pneumatic injector is effective as a tool to improve the N fertilizer efficiency. The average yield increases per region, resulting from the use of the injector, ranged from about 250 to 1300 kg grain ha^–1. The value of the yield increase would allow most farmers to recover the costs of the injector within one season, even if labour was hired to carry out the injections. The average labour requirement of the injector was 40 hours ha^–1. In Indonesia, injection of prilled urea gave yields similar to those obtained with urea briquettes.     

对接型销双向斜抽芯注塑模设计

给出了灯罩注塑模实用结构。该模具型芯由主型芯和副型芯组成，采用将副型芯推出方法实现塑件内侧壁凹槽抽芯，在塑件倾斜通孔处采用对接型销双向分型斜抽芯。既满足制品的成型和抽芯要求，又省去了斜抽芯和水平抽芯机构，模具结构紧凑，脱型可靠，成型塑件质量好。     

两极控制图在注塑瓶盖壁厚控制中的应用

针对注塑瓶盖壁厚控制的特点,介绍了统计过程控制(SPC)中的均值-极差(x-R)控制图在塑料瓶盖壁厚控制中的局限性,将两极(L-s)控制图与均值-极差控制图进行了比较,阐述了两极控制图在塑料瓶盖壁厚控制中的优越性,论述了两极控制图的构造原理和控制限计算方法,提出了两极控制图在注塑瓶盖壁厚控制中的应用,并在对两极控制图分析的基础上,对注塑成型的过程能力进行分析和改善。