Layout-Specific Circuit Evaluation in 3-D Integrated Circuits

In this paper, we describe a comprehensive layout methodology for bonded three-dimensional integrated circuits (3D ICs). In bonded 3D integration technology, parts of a circuit are fabricated on different wafers, and then, the wafers are bonded with a glue layer of Cu or polymer based adhesive. Using our layout methodology, designers can layout such 3D circuits with necessary information on inter-wafer via/contact and orientation of each wafer embedded in the layout. We have implemented the layout methodology in 3DMagic. Availability of 3DMagic has led to interesting research with a wide range of layout-specific circuit evaluation, from performance comparison of 2D and 3D circuits to layout-specific reliability analyses in 3D circuits. Using 3DMagic, researchers have designed and simulated an 8-bit encryption processor mapped into 2D and 3D FPGA layouts. Moreover, the layout methodology is an essential element of our ongoing research for the framework of a novel Reliability Computer Aided Design tool, ERNI-3D.     

金属包覆平板波导模式特性的有限元法分析

采用有限元法（FEM）分析了具有复数折射率的金属包覆介质波导的模折射率与模场分布情况。计算了具有损耗层的6层介质平板波导模折射率，并与解析解比较，二者有较好的一致性；分析了金属包覆3层平板波导中TM模折射率与波导芯厚度的变化关系，计算了金属包覆5层平板波导中TM模折秧经与金属层厚度的变化关系，并结合对模场分布的分析对模式进行了定性判断，给出了其模式演变过程。     

支持向量机在交通量预测中的应用

交通量预测对于区域交通规划有重要意义。提出一种基于支持向量机理论的交通量预测方法。该方法以统计学习理论为基础，通过和BP神经网络进行比较的实验，证明其在交通量预测中的有效性。     

Prediction of spectral reflectance factor distribution of automotive paint finishes

It is necessary to determine the accurate reflectance of painted surfaces for the review of paint finishes by computer graphics (CG) before actual painting of the exterior color of automobiles, and for quality control during production and inspection processes. We have optimized a method for measuring reflectance by using a statistical technique. We have found that the reflectance of a painted surface is best measured at an incident angle of 60° and at five aspecular angles of 10°, 18°, 28°, 40°, and 90°. Our method makes it possible to accurately reproduce reflection characteristics of paint finishes containing special flake pigments, such as pearl mica. Also it was proved that our method can apply not only to solid and metallic coatings but to all painted surfaces. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 275–282, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20125     

苏北及邻区前志留基础层的综合地球物理研究

在前新生代油气资源选区评价中，前志留面之下未变质沉积地层（简称前志留基础层）的分布具有重要的参考价值。从提高纵向分辨率的处理和反演技术的应用入手，结合约束条件,利用大地电磁测深数据反演,揭示前志留面等界面的埋深和分布；同时应用小波分析技术，从磁场中分解出区域磁异常，反演结晶基底的埋深。通过这2个界面埋深的差异来分析前志留基础层的分布     

Decision support for AIDS control programmes in Eastern Africa

The Acquired Immune Deficiency Syndrome (AIDS) constitutes the worst hazard to health care systems in Eastern Africa. Misallocation of scarce resources of AIDS Control Programmes will unavoidably lead to additional infections and casualties. The following paper discusses a system dynamics model which allows to assess the impact of different interventions on a pattern population in Eastern Africa. It becomes obvious that short- and long-term consequences of these programmes differ significantly. The optimal allocation of resources, therefore, is highly complex and calls for decision support systems to sustain AIDS control programmes.     

多模干涉型集成光学器件研究进展

基于自镜像效应(SIE)的多模干涉(MMI)型集成光学器件是集成光学中具有广泛用途的重要器件。本文详细而系统地综述了近几年来MMI器在国内外的研究进展，特别是其在集成光学中的应用。     

通信网络管理软件设计与开发

通信技术的发展，通信网络结构日益复杂，一个网络中会同时存在PDH、SDH、ATM、DWDM、无线业务和IP等多种技术。使用传统网管系统已无法胜任，只有应用针对多厂商、多技术网络的集中网管系统才能满足管理要求。现提出了一种新型的针对多厂商、多技术网络的集中网管软件的设计模型及实现方法，并详细讨论了各模块的数据结构、实现功能，以及用Java实现该软件的具体方法。特别根据网管任务的实际需要，提出了故障屏蔽的概念及实现方法。经仿真试验，证明该网管软件已达到设计要求。     

Decision Support System for Stakeholder Involvement

Stakeholder involvement is essential to the development of a total maximum daily load (TMDL) and its implementation plan. A tool, beyond a simulation model, is needed to support the decision making process that requires negotiation and compromise among stakeholders. The decision support system (DSS) described herein has a TMDL module to calculate various combinations of point and nonpoint loads that can meet the water quality criteria. Its Consensus module allows stakeholders to formulate, evaluate, modify, and vote for alternatives. The DSS displays bar charts for pollution loads from various subwatersheds and attributes the nonpoint loads to land uses. The water quality consequence of the pollution loads is output in maps, which shows sections meeting criteria in green and those not in red. The DSS requires a front end effort of site specific adaptation and model calibration. An Internet-based stakeholder process was developed to allow more concerned citizens to participate in management decisions.     

成组技术和造船模式的发展

本文论述了ＧＴ是造船模式进步的思想基础，并阐明了ＧＴ在ＳＣＩＭＳ中的作用．