大机组调峰对锅炉运行的影响及运行优化研究

利用炉膛断面温度场可视化监测系统、节能环保车、炉内三维数值模拟等先进的技术和设备对大机组调峰稳定性和运行方式优化进行试验和理论研究。     

XDPS-400分散控制系统在纳雍一电厂3号机组的应用

纳雍发电一厂3、4号机组采用新华控制工程有限公司的XDPS-400分散控制系统，文章重点介绍了XDPS系统在3号机组上的硬件配置、XDPS-400 DPU组态软件的功能模块，以及与其他系统通信接口，并简要说明系统的调试、投运情况。     

热塑性木塑复合材料性能研究概况

木塑复合材料(WPC)是一种兼有木材和塑料优点的新型材料。本文阐述了国内外WPC的研究现状，重点介绍通过表面改性以及WPC中相容剂、偶联剂的应用，改善WPC的界面相容性与加工性能，以及一些新的研究手段。认为环保型WPC材料的研究应用会大有前途。     

Strain rate sensitivity of tensile properties in high Nb containing TiAl alloys

The effect of strain rate on the yield strength of high Nb containing TiAl alloy was studied. The results show that the strain rate sensitivity varies with the test temperature, and the yield strength is not sensitive to the strain rate at room temperature but significantly sensitive to the strain rate at high temperature. An increase of the strain rate or a decrease of the temperature results in an obvious change of fracture mode. It is found that the strain rate sensitivity of this alloy varying with temperature is due to the dislocation climb generated at high temperature.     

C/C复合材料Mo - Si-N系抗氧化涂层成分优化

以Mo粉和Si粉为原始粉末,采用熔浆法在C/C复合材料表面原位合成了Si3N4-MoSi2/Si-SiC(MSN)系多层抗氧化涂层,借助扫描电镜和X射线衍射仪等分析手段对涂层的相组成和微观组织进行表征,并对涂层的抗氧化性能进行了初步研究.结果表明:Si浆料中添加适量Al可有效地阻止液态Si渗入C/C基材内部,3%Al-Si涂层具有最好的阻止Si渗入作用;Al含量超过3%时,Si的渗入程度随Al含量的增加而加剧;涂层中MoSi2的理论含量超过50%时,MSN-C/C复合材料1 400℃的抗氧化性能随MoSi2含量的增加而显著下降;MSN30-C/C和MSN40-C/C复合材料均在1 200～1 400℃表现出相近的抗氧化能力,但只有MSN30-C/C复合材料表现出抗1 450℃氧化的能力.     

钢包用滑板的热应力有限元分析

连铸钢包使用的滑动激光器是控制连铸生产过程的关键设备之一。为了确定501滑板使用中产生裂纹的原因，抑制裂纹形成，提高滑板使用寿命，本文应用有限元法进行了滑板热应力分析，并与生产中使用的滑板比较，有限元分析显示：在滑板材质一定的情况下，滑板形状以及滑板的预紧能力和固定方式是影响滑板使用寿命的基本因素。     

Interface Characteristics and Laboratory Constructability Tests of Novel Fiber-Reinforced Polymer/Concrete Piles

Conventional pile materials such as steel, concrete, and timber are prone to deterioration for many reasons. Fiber-reinforced polymer (FRP) concrete composites represent an alternative construction material for deep foundations that can eliminate many of the performance disadvantages of traditional piling materials. However, FRP composites present several difficulties related to constructability, and the lack of design tools for their implementation as a foundation element. This paper describes the results of an experimental study on frictional FRP/dense sand interface characteristics and the constructability of FRP–concrete composite piles. An innovative toe driving technique is developed to install the empty FRP shells in the soil and self-consolidating concrete is subsequently cast in them. The experimental program involves interface shear tests on small FRP samples and uplift load tests on large-scale model piles. Two different FRP pile materials with different roughness and a reference steel pile are examined. Static uplift load tests are conducted on different piles installed in soil samples subjected to different confining pressures in the pressure chamber. The results showed that the interface friction for FRP materials compared favorably with conventional steel material. It was shown that toe driving is suitable for installation of FRP piles in dense soils.     

攀钢镀锌线退火炉辐射管应用特点及其性能分析

介绍了攀钢连续热镀锌机组中退火炉辐射管的应用特点，并对U型辐射管和W型辐射管的热效率、表面温度分布及使用寿命等技术性能进行了深入的分析。     

Intercomparison of Thermophysical Property Measurements on an Austenitic Stainless Steel

The results of an inter laboratory comparison of thermal conductivity, thermal diffusivity, specific heat capacity, and thermal expansion measurements on austenitic stainless steel in the temperature range between 20 and 1000°C are presented here. Mean values are presented for the physical properties studied. Reliable relative expanded uncertainties can be stated for the properties determined, which were achieved by applying good measurement practice, i.e., 3% for thermal expansion, 5% for specific heat capacity and thermal diffusivity, and 6% for thermal conductivity. The mean values derived from this intercomparison agree well with the results of a previous intercomparison in 1990. An erratum to this article is availabale at .     

用PowerBuilder实现标签页式应用程序界面

标签页式用户界面简洁、清晰，适用于从小型到大型的各类数据库应用程序。本介绍一种基于PowerBuilder和PFC的标签页式界面的实现方法。