Transport properties in a mixed inorganic ion exchanger—zirconium phosphomolybdate—in comparison to its single salt counterparts

Amorphous inorganic ion exchangers zirconium phosphate, zirconium molybdate and zirconium phosphomolybdate have been prepared and characterized by elemental analysis, TGA, FTIR and surface area measurements. The protonic conductivity in these materials were determined at various temperatures and compared. It was found that the mixed material zirconium phosphomolybdate showed maximum conductivity at all temperatures.     

Tuning of electronic states in self-assembled InAs quantum dots using an ion implantation technique

We report the tunability of up to 150 meV of the ground state transition of self-assembled InAs quantum dots (QDs) using Mn ion implantation and subsequent annealing. Because of the exciton localization in the quantum dots, the photoluminescence efficiency (T=12K) of the quantum dot transition remains at 80% of its original value after implantation with a Mn dose of 1×10¹³ cm⁻²ions. Strong luminescence still remains at room temperature. At a high implantation dose (1×10¹⁵ cm⁻²) and rapid thermal annealing (700°C for 60s) about 25% of the QD luminescence intensity is recovered at T=12K.     

Density functional theory studies of Cu-zeolite de-NOx catalysts

Summary Recent progress in the modelling of exchanged Cu sites and their interactions with small molecules, based on DFT cluster calculations, is briefly reviewed.     

An object-oriented product database using ROSE

A product database for a design and manufacturing enterprise serves as a repository for the data needed to manufacture a product. This paper discusses how an object-oriented persistent object manager named ROSE, under development at Rensselaer, has been used in the Rensselaer CIM program to develop a STEP/PDES-compliant product database for its research test bed. In so doing, it provides an overview of the requirements for a product database system in an integrated design and manufacturing facility, and it discusses how the chosen system meets these requirements.     

丙烯酸接枝聚丙烯纤维的结构与性能

本文研究了用化学引发剂引发丙烯酸接枝聚丙烯纤维的某些影响因素。红外光谱分析表明，丙烯酸接枝在聚丙烯大分子链的叔碳原子上。Ｘ－射线衍射和ＤＳＣ分析指出，纤维接枝后结晶度有所增加，接枝前纤维存在的β－变体转化成了α－变体，接枝纤维的吸湿性、离子交换容量和染色性随接枝率增加而增大。接枝纤维的力学性能有所下降。     

上海市吴淞工业区大气PM2.5水溶成分的元素分析及细胞毒性研究

通过ICP-MS测定了上海市吴淞地区大气PM2.5水溶成分金属元素含量,通过四唑盐(MTT)测定细胞存活率,通过超氧化歧化酶(SOD)和丙二醛(MDA)两个指标测定细胞氧化损伤,琼脂糖凝胶电泳测定细胞内DNA损伤,流式细胞仪(Flow cytometry)检测细胞凋亡和周期等实验研究了大气PM2.5水溶成分的细胞毒性.实验结果表明:PM2.5可溶成分中Zn元素含量最高,PM2.5在一定浓度范围内能导致细胞死亡,引起细胞的氧化损伤,影响DNA的复制,阻碍细胞增殖,但没有诱导细胞凋亡.PM2.5中可溶金属离子对细胞毒性表现为联合作用.     

离子注入机的国内外现状

本文简要介绍了离子注入和器件的关系,概述了离子注入机的发展现状和趋势,初步探讨了我国离子注入机不能形成产业的原因。     

强流质子直线加速器中束晕现象研究

从束流包络方程与单粒子运动方程联立模型出发，考虑了纵向能量方程的耦合，研究了强流质子直线加速器中的束晕现象。采用相交间的Ｐｏｉｎｃａｒｅ截面方法和实空间Ｐｏｉｎｃａｒｅ截面方法，研究了周期聚焦系统失配的情况下束晕的形成以及加速对束晕形成的影响。     

钛酸酯催化环氧树脂固化动力学研究

用FTIR“原位”技术,研究了钛酸酯(Tc-114)偶联剂对环氧E-44和二氨基二苯基甲烷(DDM)固化反应的催化作用,得出固化程度与时间的关系曲线。又根据DSC曲线,分别算出加有Tc-114和不加Tc-114的两个固化体系的反应表观活化能和反应级数。结果表明,Tc-114的存在使环氧固化反应活化能降低,催化作用明显。     

Networks for sorting multitonic sequences

Lee and Batcher have designed networks that efficiently merge k separately provided sorted sequences of known lengths totalling n. We show that the design is still possible, and in fact easier to describe, if we do not make use of the lengths, or even the directions of monotonicity, of the individual sequences—the sequences can be provided in a single undelimited concatenation of length n. The depth of the simplest resulting network to sort sequences that are “k-tonic” and of length n is , generalizing Batcher's 1968 results for the extreme values of k (k=2 corresponding to merging, and k=n/2 corresponding to general sorting).The exposition is self-contained and can serve even as an introduction to sorting networks and Batcher's results.