圆柱壳弹性波超材料分级排列的带隙拓宽方法研究

圆柱壳弹性波超材料的弯曲波带隙拓宽问题限制其满足实际工程中的宽频隔振要求,针对该问题,本文首先研究了基于局域共振机理的圆柱壳弹性波超材料弯曲波带隙特点,研究局域谐振器质量和弹簧劲度系数的关系,然后将周期分级排列的组合方式应用于圆柱壳类弹性波超材料的带隙拓宽中,并利用有限元法进行能带结构和振动传输特性计算.研究结果显示：该方法可实现弯曲波带隙的拓宽;利用组合法构建的轴向周期分级排列圆柱壳弹性波超材料可实现705-1226Hz频率范围内弯曲波的高效衰减,带隙拓宽至分别为单一谐振器的2.55倍,这表明该方法在宽频减振方面具有明显优势,应用前景广阔.     

HARDOX 500/Q235B耐磨复合材料爆炸焊接试验研究

采用以Q235B为复层、以线状结合界面为微观判据设计爆炸焊接工艺,实现了HARDOX 500/Q235B耐磨复合材料的良好结合,结合性能和应用性能测试结果满足设计要求;金相观测结果表明,绝热剪切带是HARDOX 500复合材料产生宏观脆裂的内在原因。     

MATLAB仿真在基带传输教学中的应用

根据基带传输相关课程内容的特点,提出采用MATLAB/Simulink仿真来进行演示和实验以解决相关的问题。同时阐述了使用MATLAB/Simulink对基带传输系统仿真的过程。     

Analysis of frequency‐selective impedance loading of transmission lines for dual‐band couplers

This article proposes an analytical design methodology for dual‐band hybrid couplers and baluns structures for any arbitrary frequency ratio using a stub‐loaded transmission line. An analysis of changing the impedance behavior of the stub, is carried out for the two bands of operation, which along with a dispersive analysis, emphasizes certain conditions where the existing methodology is not applicable. In addition, an extra degree of freedom has been included to increase the solutions for a given frequency ratio, thus providing greater flexibility and feasibility of the proposed structure. The design methodology is experimentally validated with the design and fabrication of dual‐band branch‐line and rat‐race couplers for various commercial frequency bands. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE , 2011.     

Structure damage diagnosis using neural network and feature fusion

A structure damage diagnosis method combining the wavelet packet decomposition, multi-sensor feature fusion theory and neural network pattern classification was presented. Firstly, vibration signals gathered from sensors were decomposed using orthogonal wavelet. Secondly, the relative energy of decomposed frequency band was calculated. Thirdly, the input feature vectors of neural network classifier were built by fusing wavelet packet relative energy distribution of these sensors. Finally, with the trained classifier, damage diagnosis and assessment was realized. The result indicates that, a much more precise and reliable diagnosis information is obtained and the diagnosis accuracy is improved as well.     

Ka频段卫星通信上行链路自适应功率控制

为提高Ka频段（30GHz／20GHz）卫星通信系统上行链路功率控制的可靠性,提出一种上行链路自适应功率控制算法。该方法基于自回归滑动平均模型,能由测量到的下行链路降雨衰减值预测出上行链路的降雨衰减值,从而提高功率控制精度。仿真结果表明,该方法对降雨衰减具有较好的补偿效果。     

Circular polarized dual‐band antenna for WLAN/Wi‐MAX application

A novel square ring printed antenna has been suggested for dual‐band circular polarization (CP). The geometry contains a square patch and a square ring structure for dual‐band operation. Circular polarization is achieved using triangular cut at the boundary and right angle bend with inner perturbation. The suggested antenna is excited from the lower layer through electromagnetic (EM) coupling technique. The antenna shows good impedance bandwidths of 90 MHz (2.43‐2.52 GHz) and 800 MHz (5.7‐6.5 GHz, respectively. The antenna shows 3 dB axial ratio bandwidth of 20 MHz at lower band and 120 MHz at upper band with improved gain > 6 dBi. The simulated and measured results are well agreed with each other. The antenna is promising wideband operation at the upper band. This antenna was implemented on fiberglass reinforcement laminated Arlon substrate with dielectric constant (?_r = 2.55), and the overall physical dimension of 30 × 30 × 3.048 mm³. The designed antenna can be extensibly applicable in WLAN/Wi‐MAX communication. The presented antenna is designed using hyperlynx IE3D and the simulated results are presented.