特大型地下厂房岩壁梁锚杆和混凝土施工技术及质量控制

岩壁梁是一种新型结构，为通过一定深度的锚杆将钢筋混凝土梁固定在地下厂房两侧的岩壁上，而吊车荷载则通过锚杆和钢筋混凝土与岩石接触面的摩擦力传到岩体上，形成岩壁梁和岩体共同受力的结构。岩壁梁是地下厂房施工和运行的核心建筑物，岩壁梁锚杆和混凝土的施工质量是直接关系到岩壁梁成败的关键，所以施工技术和施工质量均要求极高，是地下厂房系统施工的重点和难点。本文介绍了瀑布沟水电站地下厂房岩壁梁锚杆和混凝土施工的关键技术及质量控制经验，可供同类工程借鉴参考。     

某跨线桥施工支架方案设计

结合某大桥的概况,根据梁体施工工艺要求、现场实地勘察情况确定跨线施工方案,支架采用布架灵活、搭拆方便、承载力大的WDJ碗扣式多功能钢支架,部分预应力现浇连续箱梁采用支墩加纵梁预留门洞的支架现浇,取得良好效果。     

MOS功率驱动高速脉冲激光器的研究

运用经典电路理论,对MOS功率管的开关特性、驱动原理进行了分析,导出了应用MOS功率管实现高速大电流开关应遵从的原则和方法,并成功地实现了光脉冲上升时间小于5ns、下降时间小于10ns,驱动电流达10～50AP-P激光器电源的要求.     

拉盖尔-高斯光束通过有硬边光阑光学系统的传输

采用将硬边光阑展为有限个复高斯函数之和的方法,得到了拉盖尔-高斯光束通过有硬边光阑近轴ABCD光学系统中传输的近似解析公式,作了数值计算以说明传输公式的应用,并对使用该式的误差作了讨论。     

Linear interpolation in a fuzzy information space

An approach to solving a linear interpolation problem in a fuzzy information space is proposed. Two different schemes of interpolation are outlined: a heuristic one, based on the geometrical interpretation of operations, and an optimization one, based on the expansion principle. The results obtained allow performing fuzzy linear prediction. __________ Translated from Kibernetika i Sistemnyi Analiz, No. 2, pp. 55–68, March–April 2006.     

一种确定高窄带滤光片峰值波长的方法

本文介绍一种主动式高窄带滤光片峰值波长的测量方法。该方法可以有效的测量出窄带滤光片的敏感波长，而不需要太复杂的设备。通过染料激光谐振腔的模式竞争，可以测量出滤光片的透射或反射波的波长。     

二维加速度激光传感器的设计

以角锥棱镜作为惯性元件,利用光学干涉原理,可以实现对运动物体的二维加速度测量。本文给出了二维加速度激光传感器的设计理论和测量原理。     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

多功能半导体激光医疗仪电源的研制

根据“多功能半导体激光医疗仪”整机的要求,采用同一电源对667nm和808nm半导体激光器实施供电。为避免电源在开、关机时对半导体激光管产生浪涌冲击,电源在设计中采用了适当的逻辑功能。并可保证对667nm激光器供电时,即使打开808nm激光器供电开关,也不对808nm半导体激光器供电,反之亦然。电源设有手动、计算机两种控制方法,及恒定功率、电流两种工作方式。     

轴快流CO2激光器气体压力控制

激光切割对激光功率模式、功率密度和功率稳定性要求很高,采用轴快流CO2激光器时,控制工作气体压力工作在最佳状态并保持其恒定是激光器输出连续、稳定功率的必要条件和关键技术之一。在深入研究激光器工作原理和影响激光输出功率因素的基础上,采用带积分分离的智能PID控制算法对工作气体压力进行调节。该过程控制算法简单实用,可以有效地提高气体压力控制精度,改善功率控制精度和稳定性,并用实验加以验证。