激光激活化学反应分离同位素反应池参数确定及其影响

在气体分子运动论、碰撞理论、流体力学和光化学反应、热化学反应及高斯光束理论基础上建立了位于激光器腔内外的反应池的设计尺寸同各相关参量和同位素产物产率、同位素分离系数间的关系，并给出了一些计算结果。     

Thermal Characterization of 1.3 μm InAsP/InGaAsP Ridge Waveguide MQW Lasers Based on Spectroscopy Method

An experimental way to analyze the thermal characterization of semiconductor lasers based on spectroscopy method under pulse driving conditions has been developed. By using this way the thermal characteristics of strain compensated 1.3 μm InAsP/InGaAsP ridge waveguide MQW laser diodes have been investigated. Results show that by measuring and analyzing the lasing spectra under appropriate driving parameters and temperature ranges, the thermal resistance of the laser diodes could be deduced easily. A higher thermal resistance of 640 K/W has been measured on a narrow ridge laser chip without soldering. Other thermal and spectral properties of the lasers have also been measured and discussed.     

关于生物系统超微弱发光的实验研究

生物系统存在超微弱光子辐射现象。通过一系列实验研究,我们认为,这种光子辐射既有低水平化学发光的性质,又有受激辐射的性质,是受激的低水平化学发光。     

双迭片弯曲压电陶瓷换能器及振动模态分析测量

介绍了双迭片弯曲压电陶瓷换能器的制作及边缘固定金属压电陶瓷双迭片弯曲振动，并利用有限元分析了换能器的谐振模式，采用激光多普勒干涉仪对换能器的谐振特性以及振动速度和位移分布进行了测量和分析，结果表明：换能器空载性能良好，通过有限元分析与先进测量手段的结合，能够对换能器器件的制作与分析进行指导。     

Selective area epitaxy of CdTe

We have performed selective area epitaxy (SAE) of CdTe layers grown by molecular beam epitaxy using a shadow mask technique. This technique was chosen over other SAE techniques due to its simplicity and its compatibility with multiple SAE patterning steps. Features as small as 50 microns × 50 microns were obtained with sharp, abrupt side walls and flat mesa tops. Separations between mesas as small as 20 microns were also obtained. Shadowing effects due to the finite thickness of the mask were reduced by placing the CdTe source in a near normal incidence position. Intimate contact between the mask and the substrate was essential in order to achieve good pattern definition.     

铜蒸汽激光器双闸流管触发系统的研究

研制成用于钢蒸汽激光器的双间流管触发系统。用两个闸流管并联进行交替触发，总输入电功率达7．8kW。低功率运行时，激光器的效率为0．6％与单间流管激光器的效率一致。     

微型电磁继电器的制作和仿真分析

介绍了一种基于MEMS技术的微型电磁继电器的制作过程和仿真分析.这种微继电器的大小约是4mm×4mm×0.5mm,主要采用普通的微加工技术来完成全部制作工艺.与传统继电器相比,这种继电器采用平面线圈来代替螺线管线圈,有利于MEMS工艺,并且提出了一种双支撑的悬臂梁结构做为活动电极,具有较高的灵敏性和稳定性.另外,还进行了一些有关线圈通过激励电流后对活动电极产生电磁力的理论计算和仿真分析,利用这些结果可以对这种电磁继电器的结构和参数进一步优化.     

色心激光器及其发展

色心激光器由于其特殊的调谐范围及单频、窄线宽的工作特点,可作为高分辨率的分光仪的理想窄带光源而用于分子振动一转动跃迁的研究,在光纤通信、超高速现象的研究等方面也有其独特的应用。本文叙述色心的构造及其特点,色心激光器的泵浦及泵浦的最佳化,调谐方式及新调谐范围的进展,单频、窄线宽运行的实现、激光脉冲的压缩等。最后指出色心激光器的发展方向和可能的应用。     

铟镓砷磷半导体激光的生物特性及73例椎基底动脉供血不足者的治疗

通过对甸镓砷磷半导体激光和常用He-Ne激光生物特性进行初步比较,说明半导体激光对治疗椎基底动脉供血不足疗效较明显。     

死髓变色前牙的激光漂白治疗临床评价

本文的研究目的是探讨激光冠内漂白治疗死髓牙变色的治疗作用。材料与方法 :漂白基本操作同激光活髓牙变色的漂白操作程序。先将牙龈及口唇有效防护 ,将漂白药物放在唇舌两面并同时封入根冠内。结果 :所有牙齿的灰暗变色均有 3- 5级的色度提高。平均治疗次数为 3.4± 0 .75 ,脱色 85 %以上的占 89%。结论 :牙齿创伤和牙髓分解是冠内变色的常见原因 ,激光冠内漂白是治疗这种变色的有效手段 ,可以完全恢复患者的自信。