Surface integrity of Inconel 718 by hybrid selective laser melting and milling

ABSTRACT

While selective laser melting (SLM) offers design freedom of metal parts with much less material consumption, there exist several limitations, including high surface roughness, low-dimensional accuracy, and high tensile residual stresses. To make functional parts with high form accuracy and superior surface integrity, an as-SLM part needs finishing to remove the deposited surface material. The integration of machining and SLM creates a hybrid manufacturing route to overcome the inherited limitations of SLM. However, little study has been done to characterise surface integrity of an as-SLM part followed by machining (e.g. hybrid SLM-milling). In this paper, surface, integrity including surface roughness, microstructure, and microhardness, have been characterised for IN718 samples processed by the hybrid process. It has been found that microhardness varies with the scan direction and the use of coolant in the subsequent milling, and surface integrity can be significantly improved by the hybrid SLM-milling route.     

熔体流动时间法测定PBT树脂特性粘数的研究

开发了一种新的特性粘数分析方法 ,该方法采用熔体流动时间计算特性粘数 ,与经典特性粘数分析方法有很好的相关性且具有分析时间短、费用低、无污染等优点。     

钴钇掺杂（Ba,Sr）TiO_3基介电陶瓷的制备与性能研究

采用二次固相反应法制备Ba0.7Sr0.3TiO3介电陶瓷,研究了掺杂钴、钇离子对钛酸锶钡介电性能的影响。结果表明,陶瓷样品Y3＋、Co3＋的最佳掺杂浓度分别为0.04mol%和0.05mol%,最佳烧结温度为1340℃,样品的相对介电常数为4200,介电损耗（tanδ）为0.005。样品的结构为四方晶系,P4mm空间群。获得了高介电常数、低损耗的Ba0.7Sr0.3TiO3介电陶瓷。     

High power pulsed lasers

Pulsed high power lasers can deliver sufficient energy on inertial fusion time scales (0.1–10 ns) to heat and compress DT fuel to fusion reaction conditions. Several laser systems have been examined for application to the fusion problem. Examples are Ndglass, CO₂, KrF, and I₂, etc. A great deal of developmental effort has been applied to the Ndglass laser and the CO₂ gas laser systems. These systems now deliver >10⁴ kJ and >20×10¹² W to inertial fusion targets. The Nova Ndglass laser is being constructed to provide >200 kJ and >200×10¹² W of 1 m radiation for fusion experimentation in the mid-1980s. For inertial fusion target gain, >100 times the laser input, it is expected that the laser must deliver 3–5 MJ of energy on the 10–20 ns time scale. This paper reviews the developments in laser technology and outlines approaches to construction of a 3–5 MJ driver.     

聚合物熔体挤出流动中的弹性行为

研究了聚合物熔体挤出过程中出口压力降ΔＰｅｘｉｔ与剪切应力τｗ和挤出胀大比Ｂ三者之间的关系。提出了描述这一关系的方程：ΔＰｅｘｉｔ＝τｗ（Ｂ＾４－１）＾０５／３。初步验证，用该方程计算的ΔＰｅｘｉｔ值与文献提供的毛细管挤出实测值有较好的一致性。     

氮化物添加对钛酸钡半导瓷电阻—温度曲线之影响

本文研究了氮化物添加对钛酸钡半导瓷电阻－温度曲线之影响，实验表明，除ＮＢ外ＴｉＮ、Ｓｉ３Ｎ４、ＡｌＮ也可以给出较平坦的电阻极大值，在适当的工艺条件下没有氮化物添加同样可以得到类似结果。     

Comparison of structural and photoluminescence properties of ZnO thin films grown by pulsed laser deposition and ultrasonic spray pyrolysis

ZnO thin films have been deposited by pulsed laser deposition (PLD) and ultrasonic spray pyrolysis (USP) method, respectively. X-ray diffraction and transmission electron microscopy characterizations indicate that ZnO film grown by PLD exhibits better crystallinity than that grown by USP. Photoluminescence spectra show that the near-band edge ultraviolet emission of film grown by PLD is narrower and shifts to higher energy, compared with that of film grown by USP. In the visible range, ZnO film grown by PLD exhibits four local level emission centered at 470 nm, 486 nm, 544 nm, and 613 nm, respectively, while the film grown by USP only presents a weak broad band emission centered at 502 nm. Hall measurement shows higher carrier density and lower hall mobility in ZnO film grown by PLD than that in film grown by USP. The higher density of intrinsic defects as well as higher crystallintiy is considered to account for the difference of photoluminescence in ZnO film grown by PLD with that in film grown by USP.     

TiO2的光催化作用及其研究进展(Ⅱ)

对新型光催化剂TiO2所具有的活性强、氧化性能好、节能、成本低、无毒等优异性能进行了介绍，并对其性质、结构、催化性能、影响因素、掺杂改性及研究和应用，做了扼要阐述。     

氧传感器作用原理及其固体电解质的制备

简要讨论了ZrO2基氧传感器的作用原理及用于氧传感器的钇稳定氧化锆粉体的几种制备方法。     

Antibacterial Characteristics of ZnO-CeO2 Nano-Powder Prepared by Laser Vapor Condensation

Microbialpollutionandcontaminationbymicroor ganismshaveproducedvarioustroublesinindustryandothervitalfields ,suchasdegradationandinfec tion .Thenewpasteurizationandantibacterialtech niqueshavebeendemandedandstudied[1] .Inrecentyears ,therareearthmetaloxid…