A solvent-free lift-off method for realizing vertical organic transistors with low leakage current and high ON/OFF ratio

A solvent-free lift-off method has been introduced to fabricate the aluminum nano-hole array with diameter down to 80 nm as the base electrode for a vertical organic transistor. The imprinted vertical organic transistor exhibited base leakage current density as low as 5 × 10⁻⁵ mA/cm² and high ON/OFF current ratio as high as 10⁵.     

Design and Simulation of a Light-Activated Darlington Transistor Based on a SiCGe/3C-SiC Hetero-Structure

针对抗电磁干扰的需要提出了一种由SiCGe/3C-SiC异质结构成的光控达林顿晶体管设计.用多维器件模拟软件ISE对这种新型功率开关进行了特性仿真.结果表明,与采用其他结晶类型的碳化硅衬底相比,SiCGe与3C-SiC间较小的晶格失配有利于提高器件性能,可使其最大共射极电流增益达到890,获得最好的光触发特性和较好的Ⅰ-Ⅴ特性,饱和压降大约为4V.     

Characteristics of thin film transistors fabricated in polysilicon films deposited by plasma enhanced chemical vapor deposition

Thin-film transistors (TFTs) fabricated in polysilicon films deposited by plasma enhanced chemical vapor deposition (PECVD) were characterized. The transistors were fabricated using a low temperature process (i.e., <- 700° C). The characteristics of the devices were found to improve as the deposition temperature of the polysilicon film increased. The best characteristics (μ _FE of 15 cm²/V _s andV _TH of 2.2V) were measured in the devices fabricated in the film deposited at 700° C. The devices fabricated in the PECVD polysilicon films were compared to those fabricated in polysilicon films deposited by thermal CVD in the same reactor in order to decouple the effect of the plasma. A coplanar electrode structure TFT with adequate characteristics (μ _FE of 8 cm²/V _s) was also demonstrated in the PECVD polysilicon films.     

射频功率HBT自加热效应及补偿方法

从器件I-V特性的角度,表征了射频功率异质结双极晶体管(HBT)的自加热效应。研究了器件热阻、工作电压、电流增益、发射结价带不连续性(ΔEV)等诸多因素对器件I-V特性的影响。进而研究了为补偿自加热效应所加镇流电阻对热稳定性的改善情况,给出了器件热稳定所需最小镇流电阻(REmin)与这些因素的关系。结果表明,HBT的REmin要小于同质结双极晶体管(BJT)的REmin,因此,射频功率HBT将有更大的输出功率、功率增益和功率附加效率(PAE)。     

In-plane light emission of organic light-emitting transistors with bilayer structure using ambipolar semiconducting polymers

The concept of using an ambipolar bilayer semiconducting heterostructure in organic light-emitting transistors (OLETs) is introduced to provide a new approach to achieve surface emission. The properties of top-gate-type bilayer OLETs with ambipolar materials based on two types of fluorene-type polymers used as an emissive layer and an electron blocking layer are investigated. Line-shaped yellow–green emission occurs near a hole-injection electrode. When hole transport is dominant in the upper layer which acts as an electron blocking layer, and electrons are injected into the lower layer, an in-plane light-emitting pattern is observed. The measured in-plane emission zone confirms that both hole and electron transport are determined to occur mainly along the different organic layers between the source and drain electrodes, and an in-plane recombination zone of electrons and holes exists near the bilayer organic interface. This work is anticipated to be useful for the development of in-plane light-emitting transistors.     

Stabilization of space charge polarization in ion-dispersed gate dielectric layer of organic transistors by ultraviolet illumination for write-once read-many memory

In this work, a new type organic field effect transistor (OFET) based write-once read-many memory (WORM) device was developed. The device uses an ultraviolet (UV) cross-linkable matrix polymer mixed with ionic compounds to form an ion-dispersed gate dielectric layer. Under an applied gate voltage bias, migration of cations and anions in opposite directions forms space charge polarization in the gate dielectric layer, resulting in change of the electrical characteristics. It is shown that, with UV illumination to cross-link the matrix polymer, the formed space charge polarization can be stabilized. Therefore, the OFET can be operated as a WORM with the applied voltage bias to define the polarization and in turn the stored data, and the UV illumination to stabilize the stored data.     

微波、毫米波GaN HEMT与MMIC的新进展

综述了近几年微波、毫米波氮化镓高电子迁移率晶体管(GaN HEMT)与单片微波集成电路(MMIC)在高效率、宽频带、高功率和先进热管理等方面的应用创新进展.介绍了基于GaN HEMT器件所具有的高功率密度和高击穿电压,采用波形工程原理设计的各类开关模式的高效率功率放大器,以及基于GaN HEMT器件的高功率密度、高阻抗的特点与先进的宽带拓扑电路和功率合成技术相结合的宽频带和高功率放大器.详细介绍了微波高端和毫米波段的高效率、宽频带和高功率放大器,多功能电路和多功能集成的GaN MMIC.最后阐述了由于GaN HEMT的功率密度是其他半导体器件的数倍,其先进热管理的创新研究也成为热点.     

基于SINS/GPS的子母弹侧风解算方法

为提高空地制导布撒武器子弹药命中精度,在不加装任何测风设备的基础上,在制导闭环条件下利用弹上惯导系统输出信息进行水平面内的侧向风速度估计.根据工程经验,建立了六自由度数学模型以及误差模型,对常值风及随高度变化风场条件下的风速估计算法进行验证,风速估计精度达到4.26m/s(3σ).仿真结果表明,侧向弹道机动为影响侧风估...     

The impact of gate misalignment on the analog performance of a dual-material double gate junctionless transistor

The analog performance of gate misaligned dual material double gate junctionless transistor is demonstrated for the first time. The cases considered are where misalignment occurs towards source side and towards drain side. The analog performance parameters analyzed are: transconductance, output conductance, intrinsic gain and cut-off frequency. These figures of merits (FOMs) are compared with a dual material double gate inversion mode transistor under same gate misalignment condition. The impacts of different length of control gate (L₁) for a given gate length (L) are also studied and the optimum lengths L₁ under misalignment condition to have better analog FOMs and high tolerance to misalignment are presented.     

Organic Tribotronic Transistor for Contact‐Electrification‐Gated Light‐Emitting Diode

Tribotronics is a new field about the devices fabricated using the electrostatic potential created by contact electrification as a “gate” voltage to tune/control charge carrier transport in semiconductors. In this paper, an organic tribotronic transistor is proposed by coupling an organic thin film transistor (OTFT) and a triboelectric nanogenerator (TENG) in vertical contact‐separation mode. Instead of using the traditional gate voltage for controlling, the charge carrier transportation in the OTFT can be modulated by the contact‐induced electrostatic potential of the TENG. By further coupling with an organic light‐emitting diode, a contact‐electrification‐gated light‐emitting diode (CG‐LED) is fabricated, in which the operating current and light‐emission intensity can be tuned/controlled by an external force–induced contact electrification. Two different modes of the CG‐LED have been demonstrated and the brightness can be decreased and increased by the applied physical contact, respectively. Different from the conventional organic light‐emitting transistor controlled by an electrical signal, the CG‐LED has realized the direct interaction between the external environment/stimuli and the electroluminescence device. By introducing optoelectronics into tribotronics, the CG‐LED has open up a new field of tribophototronics with many potential applications in interactive display, mechanical imaging, micro‐opto‐electro‐mechanical systems, and flexible/touch optoelectronics.