Delaminations at the free edge of a composite laminate

The concept of a fracture process zone where damage takes place is used to analyse the delaminations at the free edges of angle ply laminates under uniaxial tension. The use of a fracture process zone removes the singularity in the interlaminar stresses and enables the initiation and growth of delaminations to be modelled for a perfect laminate without any assumed prior defects. Two different models for the stress displacement relationship in the fracture process zone are examined: a constant stress up to critical displacement and a linear relationship. Finite element analysis shows that there is little difference in the predictions obtained from the two models. An approximate analysis is presented for the constant stress stress-displacement model which is shown to agree with a finite element solution and experimental data. Hence it is argued that the approximate method using a constant stress model for the fracture process zone is sufficient for accurate prediction of delaminations.     

10kV运行配电线路雷电感应过电压波形在线监测

雷电感应过电压是造成配电网故障的重要原因之一,针对雷电感应过电压波形特征不清晰的问题,作者采用过电压在线监测系统,对实际运行的佛山10kV富油甲线雷电感应过电压波形进行观测,根据波形特征给出了过电压的波形参数。结果表明,配电线路各相感应电压叠加在运行电压波形上,不同相上感应过电压与对应的回击电流在幅度、时间间隔和波形上都存在同时性,该线路观测的雷电感应电压波形表现为波头时间短、后续发生双极性高频振荡并逐渐转变为低频振荡的波形特点,首次回击感应过电压幅值大于后续回击过电压幅值,首次回击过电压的波头时间比后续过电压长,观测结果对于配电线路雷电保护具有重要意义。     

MnS夹杂物诱发钢材点蚀综述

MnS夹杂物诱发钢材点蚀,对钢材服役寿命、工作生产安全和社会经济发展产生巨大危害。首先,分析了MnS夹杂物诱发钢材点蚀的机理,包括电偶腐蚀机理、S和Cl-协同作用机理、封闭区域加速点蚀机理、贫铬区机理和微缝隙机理;其次,汇总了MnS夹杂物大小、形貌、分布,Cl-浓度、温度和应力对MnS夹杂物诱发钢材点蚀的影响;然后,总结了钢材防腐蚀的常用措施;最后,展望了防止MnS夹杂物诱发钢材点蚀的未来研究方向。     

黄铜中纳米级微裂纹的形核与钝化

黄铜薄膜试样在透射电镜中原位拉伸观察表明，在平衡条件下加载裂发出的位错纯化成无位错区，它是一个应变很高的异常弹性区。当缺口足够锐，外加载荷足够大时，这个非线弹性区中的应力有可能达到原子键合力，从而使纳米级微裂纹在无位错区中不连续形核，或从钝化的原裂纹顶端形核。这个微裂纹一昊形核，即使保持恒位移，也将钝化成空洞或缺口。     

中频正火焊管的在线矫直

针对焊接油管、套管、锅炉管的焊缝在中频正火热处理时管子弯曲的现象,提出在定径段增设垂直、横向、周向可调的土耳其头机架,对焊管的弯曲实现反弯变形,从而达到在线矫直的目的。     

仪表视窗注射模设计

分析了电器仪表视窗的工艺性,介绍了电器仪表视窗注射模具的结构设计,并对采用公差带来计算成型零件尺寸的方法进行了初步的探讨,可以在一定程度上预测模具的使用寿命。     

严重非均质油藏高渗条带的识别方法

胡状集油田属于严重非均质油藏,在注水开发后表现为油井见效快、含水上升快,并且很快在注采井间形成高渗条带,影响开发效果。如何对高渗条带识别,成为改善严重非均质油藏开发效果的关键。本文通过沉积微相法、测井评价方法、示踪剂监测分析法、动态分析法等多种方法,开展对高渗条带识别的研究,为下步措施安排提供了可靠的调整依据。     

ATTRITION IN THE BUBBLING ZONE OF A STEADY-STATE FLUIDIZED BED

This paper describes the kinetics of attrition in the bubbling zone of a fluidized bed and focuses on the development of an equation for attrition in continuous fluidized beds operating at steady state.

Laboratory data describing batch attrition of a limestone sorbent are applied to the integrated equations to describe overall attrition rate in a full-scale continuous system.     

The reaction of 1,2-dichloroethane with copper

The decomposition of 1,2-dichloroethane on polycrystalline copper has been studied using a microreactor. The reaction is found to have an activation energy of 81±5 kJ mol^–1 generating gaseous ethene and chemisorbed chlorine. The reaction terminates on completion of a monolayer of chemisorbed chlorine and is followed by a much slower reaction. The rate limiting step is thought to be C₂H₄Cl_2(phys)C2H₄Cl(_ads)+Cl_ads The reaction is compared with a UHV study of the same molecule on Cu(l 11) and the possibility of a negative ion transition state is discussed.     

高压大流量地下水隧道开挖超前帷幕注浆参数研究

锦屏水电站锦屏山隧道开挖中面临高压大流量地下水、且富水地段长(约占隧道全长的40%)的难题。为安全、可靠地进行隧道施工,以注浆材料的适应性、超前帷幕注浆的参数及工艺为研究对象,对浆液做了大量配合比试验,分析其流动性、物理力学性能和凝结时间。研究结果表明:用纯水泥进行单液浆帷幕注浆,其可注性好,可大大地提高注浆加固效果;纯水泥+双液浆对局部小的渗漏水具有很好的封堵效果。对于低于2 MPa的压力水,注浆压力取2~3倍的静水压力;对于高于5 MPa的压力水,注浆压力取净水压力加2~3 MPa。对于在2~5 MPa之间的压力水,注浆压力可灵活选取,但不宜超过7 MPa,注浆应采用孔内循环灌注的方式。地下水发生在断层破碎带时,超前帷幕注浆宜采用全断面帷幕;若出水段以溶蚀裂隙、断层、管道为主宜采用有针对性的局部超前帷幕注浆。该技术成功解决了锦屏山隧道高压大流量地下水封堵的难题,对富水地层地下隧洞施工具有重要参考价值。