国有公路运输企业改革创效的现实选择

通过对公路运输企业经营实践的考察 ,介绍了国有公路运输企业改革创效的一些现实选择 ,以供运输公司经营借鉴 ,从而摆脱困境 ,取得良好业绩     

Impact of the addition of an enzyme pool on an activated sludge system treating dairy wastewater under fat shock loads

BACKGROUND: The application of lipase‐rich enzyme pools (such as the crude solid enzymatic preparation (SEP) obtained from Penicillium restrictum solid‐state fermentation of agro‐industrial wastes) to activated sludge systems may be an effective strategy for preventing various operational problems. The continuous addition of SEP to the treatment system can become cost‐prohibitive when in situ production and/or storage are factored in. The application of SEP to high‐fat wastewater treatment would only be justified as an emergency measure, such as a sudden increase in the fat content of the bioreactor influent. Therefore, the primary objective of this work was to investigate the efficiency of a crude SEP during fat shock loads, simulated through the periodic addition of dairy industry waste containing high fat concentrations to the feed stock of an activated sludge system, operated in continuous mode. RESULTS: The test bioreactor exhibited a higher average chemical oxygen demand (COD) removal efficiency than the control bioreactor (83% for control and 90% for test) and the fat accumulation in the biological flocs of the test bioreactor was 3.2 times lower than that in the control bioreactor. Turbidity was also lower in the effluent of the test bioreactor (123 and 66 FTU in control and test, respectively) and it had a shorter recovery time between shock loads, especially when the interval between loads was shorter than one month (biweekly and weekly shock loads). CONCLUSION: The addition of SEP during fat overloads in the reactor feed maintained efficient COD removal in the test bioreactor for 270 days without any operational problems. Copyright © 2008 Society of Chemical Industry     

常规施工中不容忽视的几个环节

就毛石砌体的拉接处理、现浇混凝土柱、墙拉结筋的留设、砖混结构中构造柱的质量预控等几个环节进行了分析，提出只有在施工中采取必要的措施，才能保证施工质量。     

Choice With Initial and Terminal Link Reinforcement: An Alternative Self-Control Paradigm.

Self-control is demonstrated when a less desirable immediate outcome is chosen to ensure a substantially better future. In a novel animal analogue of this situation, primary reinforcement was delivered in both the initial and terminal links of a concurrent chain schedule. Rats made initial link choices between equal amounts of ethanol-free or ethanol-containing milk. Choosing the ethanol-free reinforcer resulted in delivery of the larger terminal link reinforcer and was thus analogous to self-control. Self-control decreased as the delay between initial and terminal links increased. The results have implications for human choice situations where decisions are made between two immediately available reinforcement alternatives each associated with a different delayed outcome. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

内容寻址网络中内容的有效定位

P2P(Peer—to—Peer)的最基本的问题是如何高效地查找到存放文件的节点。本文提出在保持内容寻址网络(Content Addressable Network：CAN)现有特性的基础上建立一种更快捷有效的内容定位结构：基于快捷链接和最小距离的内容定位。本文首先介绍了内容寻址网络的基本工作原理，然后详细描述了基于快捷链接和最小距离进行内容定位的方法，并通过仿真证实了该方法很大程度上改善了CAN的性能。     

欠驱动系统Pendubot的模糊控制策略

本文针对欠驱动Pendubot机器人系统，提出一种简单可靠的摇起及平衡控制策略。通过利用模糊控制及全状态反馈控制技术来分别设计摇起控制器及平衡控制器，其中模糊摇起控制器的设计使得系统的摇起可靠性得到大大的加强，并缩短了响应时间，两个控制器的转换通过转换装置实现。最后的仿真结果验证了算法的有效性。     

Fault-aware Communication Mapping for NoCs with Guaranteed Latency

As feature sizes shrink, transient failures of on-chip network links become a critical problem. At the same time, many applications require guarantees on both message arrival probability and response time. We address the problem of transient link failures by means of temporally and spatially redundant transmission of messages, such that designer-imposed message arrival probabilities are guaranteed. Response time minimisation is achieved by a heuristic that statically assigns multiple copies of each message to network links, intelligently combining temporal and spatial redundancy. Concerns regarding energy consumption are addressed in two ways. First, we reduce the total amount of transmitted messages, and, second, we minimise the application response time such that the resulted time slack can be exploited for energy savings through voltage reduction. The advantages of the proposed approach are guaranteed message arrival probability and guaranteed worst case application response time.     

Connecting the second exhaust-heat boiler to the operating first one under the conditions of flow circuits of combined-cycle plants with two gas-turbine units and one steam turbine

Problems arising with connecting the second exhaust-heat boiler to the first exhaust-heat boiler under load in the case of flow circuits of combined-cycle plants of type PGU-450 are considered. Similar problems exist for two-boiler single-turbine units of type PGU-325 and for two-boiler single-turbine units of traditional steampower plants with an output of 200–300 MW upon connection of the second furnace of a two-furnace boiler to the operating first furnace. Analysis of the temperature-induced stressed state and of the cyclic strength of thick-walled elements of the steam-water conduit of PGU-450 and of two-furnace boilers of two-boiler single-turbine units with an output of 200–300 MW (the check valve, the inlet header of the water economizer) is used for determining the steam temperature differences in the high-pressure conduits to the steam turbine and the order of connection of the second exhaust-heat boiler to the operating fist one. Modes of enabling a two-boiler single-turbine unit of a combined-cycle plant, which are most “rigid” from the standpoint of thermal strength, are determined. __________ Translated from élektricheskie Stantsii, No. 2, February 2006, pp. 11–17.     

多台并行随机CIMS可靠性的扩散估计界

ＣＩＭＳ可靠性模型随机研究的突出特点是工作站的并行结构使系统的状态个数呈现指数级增大，同时，并行结构与有限的缓冲库相互交织在一起，这使系统状态呈爆炸趋势，显然，对系统作精确的分析与系统呈现的状态爆炸趋势构成了难以解决的矛盾，如何解决这一矛盾正是ＣＩＭＳ随机理论有待开发的重要课题。我们把扩散近似方法引入到多台并行的ＣＩＭＳ可靠性模型中，以简单的连续过程描述了具有状态爆炸趋势的复杂离散过程，给出了ＣＩ     

受控离散事件过程（CDEP）的一种代数分析方法

本文在文［１～３］的基础上，提出了受控离散事件过程（ＣＤＥＰ）的一种代数分析方法，弥补了Ｒａｍａｄｇｅ和Ｗｏｎｈａｍ［１～３］的理论对具体系统的应用缺乏可操作性的缺陷，使得对ＣＤＥＰ动态过程的分析变得更为直观，同时也使控制器的设计过程更具可操作性．