不同Li/Nb摩尔比In∶Fe∶LiNbO_3晶体的生长及其光学性能

在Li NbO3(LN)中掺摩尔分数为1%的In和掺质量分数为0.03%的Fe,用提拉法技术生长具有不同n(Li)/n(Nb)[n(Li)/n(Nb)=0.94,1.05,1.20,1.38]的In∶Fe∶LN晶体。测试不同n(Li)/n(Nb)的In∶Fe∶LN晶体的吸收光谱、抗光致散射能力和指数增益系数,并计算晶体的有效载流子浓度。结果表明晶体样品随着n(Li)/n(Nb)增加,吸收光谱的吸收边发生紫移,抗光致散射能力增加,指数增益系数和有效载流子浓度增大。采用n(Li)/n(Nb)=1.38的In∶Fe∶LN晶体作记录介质,n(Li)/n(Nb)=1.05的In∶Fe∶LN晶体作位相共轭镜进行全息关联存储实验。实验表明存储系统具有实时处理,成像质量好,信噪比高和能反复使用等优点。     

极压抗磨添加剂对高温复合锂基润滑脂性能影响的研究

将3种极压抗磨添加剂（T 304、T 321和T 404）分别加入到4种不同组分的高温复合锂基润滑脂中，考察其对润滑脂性能的影响。研究发现，加入不同的添加剂使润滑脂的油膜强度、锥入度和滴点产生不同的变化，并对其产生的原因作了机理分析。     

Improved electrochemical redox performance of 2,5-dimercapto-1,3,4-thiadiazole by poly(3-methoxythiophene)

High electrocatalytic activity of an electropolymerized film of poly(3-methoxythiophene) (PMOT) is reported toward the redox reaction of 2,5-dimercapto-1,3,4-thiadiazole (DMcT) as a promising cathode material for the lithium ion battery. Cyclic voltammetry showed improved electrochemical performance of DMcT on PMOT-coated Pt electrode, indicating accelerated redox kinetics. Moreover, charge-discharge tests exhibited higher discharge capacity and slower capacity fading of the PMOT-doped DMcT composite cathode compared with pure DMcT.     

Analysis of Insect Cuticular Hydrocarbons Using Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry

Insect cuticular hydrocarbons (CHCs) were probed by matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry with a lithium 2,5-dihydroxybenzoate matrix. CHC profiles were obtained for 12 species of diverse insect taxa (termites, ants, a cockroach, and a flesh fly). MALDI spectra revealed the presence of high molecular weight CHCs on the insect cuticle. Hydrocarbons with more than 70 carbon atoms, both saturated and unsaturated, were detected. When compared with gas chromatography/mass spectrometry (GC/MS), MALDI-TOF covered a wider range of CHCs and enabled CHCs of considerably higher molecular weight to be detected. Good congruity between GC/MS and MALDI-TOF was observed in the overlapping region of molecular weights. Moreover, a number of previously undiscovered hydrocarbons were detected in the high mass range beyond the analytical capabilities of current GC/MS instruments. MALDI was shown to hold potential to become an alternative analytical method for insect CHC analyses. The ability of MALDI to discriminate among species varying in the degree of their relatedness was found to be similar to GC/MS. However, neither MALDI-MS nor GC/MS data were able to describe the phylogenetic relationships.     

Binder effect on cycling performance of silicon/carbon composite anodes for lithium ion batteries

The cycling performance of a silicon/carbon composite anode has been significantly enhanced by using acrylic adhesive and modified acrylic adhesive as binder to fabricate the electrodes for lithium ion batteries. The capacity retentions of Si/C composite electrodes bound by acrylic adhesive and modified acrylic adhesive are 79% and 90% after 50 cycles, respectively. These two binders are electrochemically stable in the organic electrolyte in the working window. They also show larger adhesion strength between the coating and the Cu current collector as well as smaller solvent absorption in the electrolyte solvent than polyvinylidene fluoride (PVDF). Furthermore, sodium carboxyl methyl cellulose (CMC) plays an important role on improving the properties of acrylic adhesive, which increases the adhesive strength of acrylic adhesive and improves the activation of the electrodes.     

商业化的锂离子电池石墨负极材料的研究进展

综述了锂离子电池石墨负极材料的研究进展,对MCMB、天然石墨与人造石墨、炭纤维为代表的石墨负极材料目前的研究和应用现状进行了详细的论述,并对石墨类炭负极的发展作了展望。     

New polymer electrolytes based on ether sulfate anions for lithium polymer batteries: Part I. Multifunctional ionomers: Conductivity and electrochemical stability

New lithium conducting ionomers based on commercial polyethers were synthesized by chemical modification in order to incorporate not only the anionic function on the polymer backbone but also polar aprotic and (or) protic groups improving both the salt dissociation and the anion-solvating ability of the multifunctional copolymers. The choice of environmentally friendly rather than perfluorinated anionic functions did not appear to compromise for the ionic conductivity. Lastly, the preliminary results on the use of an electrochemically stable and relatively cheap additive sparteine appear promising and could be generalized to a variety of polymer electrolytes for lithium batteries.     

Zwitterion effect in polyelectrolyte gels based on lithium methacrylate-N,N-dimethyl acrylamide copolymer

Zwitterionic compounds such as those based on 1-butylimidazolium-3-(n-butanesulfonate) have previously been shown to have positive effects on the transport properties of polyelectrolytes. The addition of the zwitterion has been found to, in some cases, increase the dissociation of the lithium ion and enhance the conductivity by almost an order of magnitude. In this work, we report the effects of adding the above-mentioned zwitterion into the polyelectrolyte gel system poly(lithium methacrylate-co-N,N-dimethyl acrylamide); the anionic group being a stronger base leads to different behaviour for this copolymer compared to previous work. Polyelectrolyte gels based on dimethyl sulfoxide and polyether solvents were investigated to determine the breadth of applicability of the zwitterion in improving lithium ion transport. Impedance spectroscopy and pulse field gradient-NMR diffusion indicate an increase in the number of available charge carriers with zwitterion addition in some gel systems, however, the effect is not universal.     

两种盐溶液除湿器的建模与对比

描述了绝热型与内冷型两类平板溶液除湿器的结构特点,在盐溶液竖直降膜与湿空气顺流、充分发展的工况下,基于Navier-Stokes动量方程建立盐溶液与湿空气热、质传递过程耦合数学模型,以LiCl水溶液作为除湿剂,考虑气液界面处的剪切力边界条件,在恒壁温与绝热边界条件下,对两种具有相同尺寸规格的除湿器的除湿过程进行了数值模拟,得到沿高度方向上盐溶液温度、浓度和湿空气温度、含湿量的变化情况,并对两者在相同工况下进行对比,定量描述了两类除湿器在除湿性能上的差异.结果发现内冷型除湿器的出口溶液的温度更低,接近于冷却介质温度,而且处理后的湿空气的含湿量比绝热型除湿器低5.1 g·kg^-1,空气的出口温度也要低近10.5℃,但除湿溶液的浓度变化很小,进、出口浓度差不到1％.     

四氟硼锂和六氟砷锂的合成与拉曼光谱分析

介绍了合成高纯无水的ＬｉＢＦ４和ＬｉＡｓＦ６的新方法，并讨论了其合成条件，指出制备多孔状ＬｉＦ和控制反应温度是合成的关键。