Spline-regression estimation of the influence of exposure dose on cancer probability

Spline regression is used to analyze the influence of radiation on the cancer probability in a group of participants of Chernobyl accident mitigation, depending on the exposure dose. A new method is proposed to approximate modified polygons by linear splines with two nodes. An algorithm for the identification of a transition point is outlined. __________ Translated from Kibernetika i Sistemnyi Analiz, No. 3, pp. 168–176, May–June 2006.     

电荷灵敏放大器不用反馈高值电阻的新方法

本文提出了一种电荷灵敏放大器不用反馈高值电阻的新方法。对这种方法作了电路分析以及对实际电路的测量结果作了介绍。     

石油天然气长输管线用钢新进展

本文介绍了１９９０年以来国外在石油天然气长输管线用钢方面的最新成果，以获得较低的强度和韧性匹配为目的经轧后加速冷却工艺后的钢的强度的预测和控制；具有优良抗氢致裂纹的含硼、微碳、低硫、Ｎｂ－Ｔｉ微合金化、Ｘ６５－Ｘ８０级管线钢的开发，满足于特殊性能要求的ＴｉＯ处理技术及Ｘ８０级ＴｉＯ细化晶粒钢、低硬度和低屈强比钢，以及复合板加工耐腐蚀钢管的生产。     

型钢厂试轧美标H型钢性能分析研究

分析了型钢厂试制热轧美标H型钢低温冲击韧性偏低的原因，并在此基础上提出了对生产工艺的优化与改进。     

Heat loss and thermoelectric generator design

With the object of evaluating its importance to thermoelectric generator design, heat loss is introduced into the standard thermoelectric generator design theory. The theory for both the constant hot and cold junction temperatures model and the constant heat input model are so modified. The modification is first order and, therefore, is limited to small leg heat-transfer coefficients. Numerical results using representative properties show that significant differences can exist between the optimum geometry and performance of a generator idealized as lossless and those of a generator designed by the modified theory. The largest differences occur with the constant heat input model.     

发电机组低励限制的功能特点及试验

分析低励限制的应用目标和功能特点,在此基础上,提出低励试验目的和内容,为正确发挥低励限制功能及并网预防事故发生提供参考。     

关于新建炉EDTA低浓度清洗的探讨

阐述了EDTA清洗锅炉的基本原理,低浓度清洗新建炉的工艺、方法及控制要点,EDTA低浓度清洗与协调EDTA清洗的经济性比较,为新建炉EDTA低浓度清洗探索了方向。     

基于MEMS微电极芯片的电穿孔系统

报道了一种基于微加工金电极的细胞电穿孔芯片及一套完整的细胞电穿孔系统。该系统能够在多种细胞系中实现高效细胞电穿孔(对典型HEK-293A(人胚胎肾细胞)细胞的穿孔效率高于90%,3T3-L1(小鼠胚胎成纤维细胞)的电穿孔效率高达80%)。并且具有手动模式和自动模式。同时,由于基于独特的电极设计,其所需电压也远低于现有设备(典型工作电压为60 V),成本更低,操作更安全。     

A universal dependence for thermal conductivity of metals and dilute alloys

A universal curve relating the maximum of thermal conductivity and its respective temperature with the residual electrical resistivity has been proposed for metals and dilute alloys. Based on the equation of that curve, a comparative analysis of selected literature data of thermal conductivity of metals, which have residual electrical resistivity in the range 10^–11<₀<10^–5. cm, have been performed. Using the data for 33 metals, confirmation of the Wiedemann-Franz law for the impurity component/T of thermal conductivity was obtained, which means that _th/_el1, where _th and _el are the parameters of the electron-lattice defect interaction obtained from measurements of thermal and electrical conductivity, respectively. Examples of the failure of the Wiedemann-Franz law are also presented, exhibiting the values of _th/_el in the range 0.16 to 25. Measurements of thermal conductivity in the range 2 to 20 K and determination of the residual electrical resistivity for the samples of Cd doped with Zn and quenched were performed, resulting in values _th/_el1.     

Thermal expansion of Pyros from 20 to 1273 K

Pyros, which is a Ni-base alloy (82% Ni, 8% Cr, 4% W, 3% Mn, and 3% Fe), has been used extensively in France since 1926 as a temperature sensor and as a reference material for thermal expansion measurements. In this paper we present recent data on the expansion and expansivity of Pyros from 20 to 1273 K. Expansivity results, obtained by taking the derivative of a cubic-spline polynomial fitting performed to the L/L experimental data, show that Pyros is a stable material in the 20 to 1273 K temperature range. Furthermore, since the expansivity values are similar to those of steels, Pyros should be of special interest to laboratories which are concerned with expansion measurements on steels. Therefore, we suggest that Pyros be considered as a suitable reference material for thermal expansion measurements on steels, and until more accurate results are obtained, we propose our results as reference data between 20 and 1273 K.Paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.