β-Sialon-Al2 O3-SiC系复相材料的研制和性能

研究了在 15 0 0℃的流动氮气中 ,用Al粉、Si粉、Al2 O3粉、刚玉和SiC的颗粒及细粉直接制备 β Sialon -Al2 O3-SiC系复相材料的氮化烧结技术。XRD和SEM分析表明 ,结合相 β Sialon的显微形貌随刚玉量的增加由纤维状向棱柱状转变 ,发育良好。复相材料的高温抗折强度高于常温抗折强度。抗热震试验结果显示 :添加适量的刚玉对β Sialon -SiC复相材料和添加适量的SiC对β Sialon -刚玉 复相材料都具有良好的增韧效果 ,这是β Sialon的纤维增强及柱状晶体原位自补强增韧和复合弥散相增韧综合作用的结果。抗碱和抗高炉渣试验均显示了该复相材料优良的抗碱和抗铁渣侵蚀能力。     

New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties

Understanding the structure/property relationship in polymer/layered silicate nanocomposites is of great importance in designing materials with desired properties. In order to understand these relations, a series of polylactide (PLA)/organically modified layered silicate (OMLS) nanocomposites have been prepared using a simple melt extrusion technique. Four different types of OMLS have been used for the preparation of nanocomposites, three were modified with functionalized ammonium salts while fourth one was a phosphonium salt modified OMLS. The structure of the nanocomposites in the nanometer scale was characterized by using wide-angle X-ray diffraction and transmission electron microscopic observations. Using four different types of layered silicates modified with four different types of surfactants, the effect of OMLS in nanocomposites was investigated by focusing on four major aspects: structural analysis, thermal properties and spherulite morphology, materials properties, and biodegradability. Finally, we draw conclusions about the structure/property relationship in the case of PLA/OMLS nanocomposites.     

Poly(etherimide)/montmorillonite nanocomposites prepared by melt intercalation

A novel aromatic amine organo‐modifier synthesized in our previous work was used to treat montmorillonite (MMT) and the organo‐modified MMT was used to prepare poly(etherimide) (PEI)/MMT nanocomposites by a melt intercalation method. MMT treated by this amine exhibited large layer‐to‐layer spacing and a high ion‐exchange ratio (>95%). The nanocomposites were characterized with X‐ray diffraction (XRD), transmission electron microscopy (TEM), dynamic mechanical analysis, a universal tester, thermogravimetric analysis, and by differential scanning calorimetry. The results of XRD and TEM showed that the nanocomposites formed exfoliated structures even when the MMT content was 10 wt %. When the MMT content was below 3 wt %, the PEI/MMT nanocomposites were strengthened and toughened at the same time. The nanocomposites also showed marked decreases in coefficient of thermal expansion and solvent uptake. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1857–1863, 2003     

磁性油墨的研究进展

综述国内外磁性油墨的研究现状。分析了磁性油墨中的强磁性材料、连接料、填充料和添加料的各种分类、配比及各组分作用,探讨了磁性油墨的研究方向。首次指出:在今后的研究中应该采用纳米级的磁性颜料和复合磁性颜料,选用合成树脂作为连接料,并应重点研究添加料与磁性油墨性能的关系。     

聚酰亚胺/二氧化硅杂化膜的制备与介电性能的研究

采用溶胶-凝胶法制备了BTDA-ODA聚酰亚胺/SiO2杂化膜,利用红外分光光度计（FTIR）、热重分析仪（TGA）和透射电镜（TEM）研究了杂化膜的微观结构和热性能,并对杂化膜的介电常数（e）和介电损耗（tand）随SiO2粒子含量和电场频率的变化进行了分析和讨论。结果表明：杂化膜的介电常数和介电损耗随SiO2粒子含量的增加而增大,随电场频率的升高而逐渐降低,用考虑到粒子的形状因素和两相间相互作用的EMT模型可以预测聚酰亚胺/SiO2杂化膜的介电常数。     

Mn对含炭耐火材料抗渣侵蚀性的影响

以烧结板状刚玉、锆莫来石、天然鳞片状石墨为主原料 ,酚醛树脂为结合剂 ,Al、Si、B4C、Mn粉为添加剂 ,经 1 4 50℃埋炭烧成后 ,制成铝炭和铝锆炭系列试样 ,并对各试样的抗渣侵蚀性能进行了对比研究。结果表明 :在铝锆炭材料中 ,当Mn与Al、Si复合加入且Mn与C的质量比为 1∶4时 ,试样的抗侵蚀性和渗透性均较好 ;在铝炭材料中 ,当Mn与Al、Si、B4C复合加入且Mn与C的质量比为 1∶4时 ,试样的抗渗透性较好     

Use of laser scanning confocal microscopy for characterizing changes in film thickness and local surface morphology of UV-exposed polymer coatings

Laser scanning confocal microscopy (LSCM) has been used to characterize the changes in film thickness and local surface morphology of polymer coatings during the UV degradation process. With the noninvasive feature of LSCM, one can obtain thickness information directly and nondestructively at various exposure times without destroying the specimens or deriving the thickness values from IR measurement by assuming uniform film ablation. Two acrylic polymer coatings were chosen for the study, and the physical and chemical changes of the two systems at various exposure times were measured and analyzed. Those measurable physical changes caused by UV exposure include film ablation, formation of pits and other surface defects, and increases in surface roughness. It was found in both coatings that changes in measured film thickness by LSCM were not correlated linearly to the predicted thickness loss using the changes in the CH band obtained by the Fourier Transform Infrared (FTIR) spectroscopy measurements in the later degradation stages. This result suggested it was not a uniform film ablation process during the UV degradation. At later stages, where surface deformation became severe, surface roughness and profile information using LSCM were also proven to be useful for analyzing the surface degradation process Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 13–14, 2004 in Philadelphia, PA.     

含氟高分子材料在汽车、建材上的应用开发

本文浅述了含氟高分子材料的特性及其在汽车，建材方面的应用状况，分析了含氟材料对汽车、建筑业的支持作用和发展方向。     

减水剂对超低水泥Al_2O_3－Cr_2O_3ZrO_2质浇注料流变性能的影响

对添加三种有机高分子减水剂和两种聚磷酸盐碱水剂的Ａｌ２Ｏ３－Ｃｒ２Ｏ３－ＺｒＯ２质浇注料桨体与泥料流变参数进行对比。研究表明，在加有Ａｌ２Ｏ３、ＣｒＯ３超细粉，以纯铝酸钙水泥为结合剂的浇注料中，有机减水剂的作用效果更为显著。对减水剂的作用机理和作用规律以及ξ电位，流变参数和流动值的关系作了探讨。     

The structure of model coatings: latex-bound plastic pigment coatings

The immobilization and consolidation of model coatings based on monodisperse polystyrene (plastic pigment) and S/B latexes of known particle sizes were studied in terms of their packing volumes and the extent of latex shrinkage, which was found to increase with increasing pigment volume up to the critical pigment volume concentration (CPVC). The maximum latex shrinkage was estimated from the CPVC. Then, the porosity of model coatings was calculated based on three proposed latex shrinkage models: maximum, minimum, and linearly decreasing latex shrinkage. The number of pores and the average equivalent spherical pore diameters were subsequently calculated. The opacity and gloss of model coatings on polyester films were measured and their porosity was also determined by a simple coat weight-thickness method. The CPVC values determined by the opacity, gloss, and porosity versus PVC relationships, respectively, agreed very well with each other. The CPVCs determined by the opacity and porosity versus PVC curves were identical. The comparison between the theoretically calculated and experimental porosity values showed that the linearly decreasing value between the maximum and minimum latex shrinkage would best fit the experimental porosity data. The effect of plastic pigment particle size on the optical properties and porosity of model coatings was also studied and it was observed that the coating opacity and porosity increased with increasing plastic pigment particle size, but the gloss decreased. Additionally, a minimum crack-free temperature (MCFT) of latex-bound coatings was proposed to better predict the behaviors of latexes as pigment binders. The wet state of model coating dispersions, the surfaces of consolidated model coatings, and their internal structure were examined by both electron and atomic force microscopy, and their micrographs were found to be consistent with our immobilization and consolidation models.