基于复合顺序形态变换的车牌边缘检测

边缘检测是图像分割的重要环节,边缘提取的好坏直接影响了整个图像处理的效果。数学形态学用具有一定形态结构的“结构元素”去度量图像的形态,以解决图像处理和分析问题。文章通过对多种边缘检测方法的分析比较,结合高速公路路口汽车图像噪声大的特点,提出了基于复合顺序形态变换的车牌边缘检测。该方法不但能有效地改善有噪图像边缘检测的效果,鲁棒性好,而且并行快速,便于硬件实现。     

以参加数模竞赛为契机提高学员的综合素质

我院首次参加全国大学生数学建模竞赛就获得了优异成绩。本文总结了去年的一些经验和做法,阐述了通过参加这项活动,从5个方面确实能够提高学员的综合素质;并且为了搞好今年的竞赛工作,介绍了一些具体的做法和措施。     

Effect of Reactor Ambient Pressure on the Morphology of Spray Dried Magnesium Sulphate Powders

The effect of reducing the reactor air pressure on the morphology of spray dried magnesium sulphate powders is investigated, experimentally. A reactor, capable of drying and pyrolyzing solution sprays at low pressures, is designed and manufactured. A vibrating mesh nebulizer is employed to generate the spray. Four different pressures, starting from 60 Torr to the atmospheric pressure, and two different reactor air temperatures of 130°C and 420°C, are considered. In addition, two different concentrations of magnesium sulphate solutions are tested. The results are explained based on the effect of reactor air pressure on the droplet evaporation rate.     

Morphology development in polyethylene/polystyrene blends: the influence of processing conditions and interfacial modification

The influence of processing conditions and interfacial modification on the morphology evolution and the composition range within which fully co‐continuous high density polyethylene/polystyrene blend structures can exist during blending in a single screw extruder was studied. Blends ranging from pure A to pure B component, with and without compatibilizer, were prepared under two different shear rates. It was found that high shear rates displaced the breakdown–coalescence balance of the dispersed nodules to the side of coalescence, narrowing the percolation domain and the critical composition for full co‐continuity decreased with increasing shear rates. The addition of a tri‐block compatibilizer induced the percolation threshold of the polystyrene phase to begin at lower percentages of polyethylene but the phase inversion point did not change. The experimental results are discussed in the light of various theoretical models. Copyright © 2005 Society of Chemical Industry     

汽车侧倾稳定性的动态仿真(一) --数学模型的建立

本文通过对独立悬架和非独立悬架侧倾运动特性的分析并结合采用已有的轮胎力学模型，建立了反映独立悬架和非独立悬架侧倾运动特性的数学模型。在此基础上，根据汽车侧倾时悬挂质量对前后悬架的力和力矩作用来组合前后悬架，我们得到了双轴汽车在稳态转向时侧倾运动的数学模型。通过组合不同的前后悬架，这个数学模型可以反映各种悬架配置的双轴汽车。它主要是针对汽车进行稳态转向时的侧倾情况，考虑了汽车的结构参数、惯性参数以及悬架、轮胎的柔性形变对汽车侧倾运动特性和抗侧翻能力的影响。它可以用来计算一定横向加速度下汽车的侧倾反应和轮胎的载荷变化，也可以用来计算一辆确定的汽车在保持侧倾稳定性的前提下所能达到的最大横向加速度，还可以用来分析各项参数对汽车侧倾稳定性的影响。     

Influence of Gaseous Atmosphere on Morphology and Cellular Fatty Acid Composition of Campylobacter jejuni

ABSTRACT: We evaluated the effect of growth environment on morphology and fatty acid (FA) profiles of 2 strains of C ampylobacter jejuni (ATCC 29428 and 33560) grown under various gaseous conditions. Viable counts were determined by plate count and percentages of coccoid cells. FA profiles were measured by gas chromatography. Plate counts were lowest when cultures were grown in air and highest in CO₂ (10%), O₂ (5%), and N₂ (85%). For 29428, percentages of coccoid cells did not differ among treatments. For 33560, percentages of coccoid cells were greater than for 29428 and varied among treatments (13% to 87%). There were no significant ( P > 0.05) relationships between percentages of coccoid cells and amounts of individual or combinations of FA either between or within strains.     

计算机基础课题库系统中试卷生成模型研究

探讨了计算机基础课程题库系统中题型难度系数确定模型、试题在章节中的分布模型、各级难度题型分布模型，认为利用这些模型和随机函数能够确定计算机基础课程相应章节中相应等级难度的试题中抽取相应数量的试题，再利用数据库的检索功能实现试卷的自动生成。     

The effect of support morphology on the reaction of oxidative dehydrogenation of ethane to ethylene at short contact times

The oxidative dehydrogenation of ethane is carried out in short contact time reactors over Pt and LaMnO₃ based catalysts supported on a large number of different ceramic substrates (45, 60 and 80 ppi foam monoliths and 200, 400, 600, 900 and 1200 cpsi honeycomb monoliths). Experimental results, obtained under the same conditions at varying the C₂H₆/O₂ ratio, showed that the highest performance in terms of ethylene selectivity and yield is always attained on LaMnO₃ catalysts. Furthermore, the results are significantly influenced by the morphology and cell density of the support, with 45 and 60 ppi foams and 400 and 600 cpsi honeycombs giving the best performance. The experimental results are explained by means of geometrical and fluid dynamic considerations on the support, and by means of a 2D mathematical model, which clearly indicates an optimal intermediate cell density for maximising ethylene selectivity and yield.     

Application of ultrasonic waves in activation of microcrystalline cellulose

In this work, microcrystalline cellulose (MCC) was activated with ultrasonic waves. The influences of ultrasonic treatment on the changes of supramolecular structures and morphology structure were studied by WAXS and SEM. The accessibility of the MCC was characterized by water retention value (WRV) and specific surficial area. The influence of ultrasonic treatment on the reactivity of MCC was investigated through the reaction of MCC being oxidized into 2,3‐diadehyde cellulose (DAC) by periodate sodium. The mechanism of the reactivity change of ultrasonically treated MCC was examined. The results showed that the degree of crystallinity of MCC decreased and the degree of polymerization showed little change after treatment with ultrasonic waves. The morphologial variation of the treated MCC was significant when compared with the untreated MCC, which contribute to the improvement of accessibility. The aldehyde content of DAC prepared from ultrasonically treated MCC was improved from 64.19 to 85.00%, indicating that the regioselective oxidation reactivity of MCC was significantly improved. The aldehyde content was found to first increase with time of ultrasonic treatment to a point, and then decrease as time progressed. In addition, the aldehyde content was found to increase with an increase in ultrasonic power. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008