输气干线单个分输站站址最优化研究

输气干线分输站站址规划设计合理与否，直接影响到分输站至各城市门站之间输气管线总投资和未来管网系统的发展。为此,着重讨论并建立了以分输站站址、各城市门站与分输站之间管道直径、壁厚、分输站压力为设计变量，以各城市门站与分输站之间管道投资最小为目标函数的分输站站址优化数学模型。根据模型特点，采用混合离散变量复合形法与数据库技术相结合来求解分输站站址。以此站址为参考点，结合现场勘察，在参考点附近沿输气干线预选多个分输站站址，并对影响分输站建设和管理的环境因素用多目标模糊评价方法进行综合评价，以评价效果好的站址为最优分输站站址。用算例说明了分输站站址优化结果不仅与工艺参数变化有关，且与分输站所处环境因素有关。提出还应深入研究输气干线中具有多个分输站的站址优化问题。     

Identification of gaps in mangrove forests with airborne LIDAR

Mangrove forests change frequently due to disturbances from tropical storms, frost, lightning, and insects. It has been suggested that the death and regeneration of trees in small gaps due to lightning may play a critical role in mangrove forest turnover; however, the large-scale quantification of spatial pattern and areas of gaps is lacking for investigating this issue. Airborne light detection and ranging (LIDAR) technology provides an effective way for identifying gaps by remotely obtaining direct measurements of ground and canopy elevations. A method based on an alternative sequential filter and black top-hat mathematical morphological transformation was developed to extract gap features. Comparison of identified gap polygons with raw LIDAR measurements and field surveys shows that the proposed method successfully extracted gap features in mangrove forests in Everglades National Park. There are 400–500 lightning gaps per square kilometer in mangrove forests at the study sites. The distribution of gap sizes follows an exponential form and the area of gaps with sizes larger than 100 m² account for 55–61% of the total area of gaps. The area of gaps in the mangrove forest in Everglades National Park is about 4–5% of the total forest area and the average gap formation rate is about 0.3% of the total forest area per year, indicating that lightning gaps play an important role in mangrove forest dynamics.     

The principles of information processing based on the numerical solution of the nonlinear heat-conduction problem. Pt. 1. The three-dimensional discrete mathematical model

A three-dimensional solution of the direct problem of heat conduction when a linear pulsed heat source acts in the plane of contact of two semibounded bodies is presented. The solution is obtained by the method of finite differences. An example of the modeling is considered. __________ Translated from Izmeritel’naya Tekhnika, No. 10, pp. 42–45, October, 2007.     

道路与匝道中线自动绘制的算法与实现

道路与立交匝道平面中线的计算机自动绘制是道路路线CAD软件的核心功能之一,在道路工程计算机动态交互式设计、计算机辅助成图方面具有基础性作用.依据道路中线线形的曲率变化特点,推导了道路中线坐标计算的通用数学模型,并根据一个工程实例在通用图形系统AutoCAD环境下实现了道路与匝道中线的自动绘制.     

在线磨辊辊面粗糙度的实验研究

影响轧辊表面粗糙度的因素很多，为此对影响辊面粗糙度的因素进行了系统分析和实验研究，得出了轧辊和砂轮的速度、砂轮粒度、砂轮直径及磨削液等主要因素对轧辊表面粗糙度影响的一般规律。利用回归分析的方法建立了轧辊表面粗糙度的数学模型，并将计算值与实测值进行了比较，发现两者基本一致。此项研究为适时控制冷轧带钢在线磨辊辊面粗糙度提供了计算模型。     

中板板形控制及数学模型

分析讨论了采用头尾补偿宽度法(简称补偿宽度法)控制板形的方法及步骤，并给出了其数学模型。补偿宽度法是简单易行的中板平面形状控制的有效方法。     

油墨用聚氨酯胶粘剂的性能研究

主要研究用于印刷油墨的单组分溶剂型聚氨酯粘合剂，考查聚合物多元醇类型对树脂微观形态、机械性能以及印刷适应性和附着性等性能的影响。研究结果表明，聚酯型树脂的微相分离程度低于聚醚型，具有较好的机械性能、印刷适应性和附着性。     

锆酸铅薄膜的生长特性与表面化学态

以醋酸铅和异丙醇锆为原料，乙二醇甲醚为溶剂。通过溶胶-凝胶法和快速退火工艺在Pt(111)／Ti／SiO2／Si(100)基片成功地制备出不开裂的钙钛矿PbZrO3薄膜。用XRD和原子力显微镜测量了薄膜随退火温度变化的结构和表面形貌特征，用XPS测试了650℃退火PbZrO3薄膜的表面化学态。     

通用的自然语言词法分析机制

本文提出了一种通用的自然语言词法分析技术,其处理机构不仅可以独立于具体自然语言,而且又具有适合于未来智能计算机直接处理的规则形式和实现过程.文中还详细讨论了独立于自然语言的词法分析技术,以及我们在IMT/EC系统中实现的词法分析机制的工作原理.     

基于数学形态学的红外图像小目标检测

针对红外成像跟踪系统的低信噪比、背景和噪声干扰严重的小目标图像,以及后续的目标识别处理需要目标的灰度信息的特点,设计了一种基于数学形态学的红外灰度图像小目标检测算法,并用FPGA硬件实现。实验表明,数学形态学滤波能够大大提高目标的信噪比,去除背景和噪声干扰,保留目标的灰度信息,满足系统实时性要求,是一种有效的红外灰度图像小目标检测算法。