网络环境下大学英语自主学习模式的研究

随着社会的飞速发展和要求,培养学生在网络环境下的英语自主学习能力成为大学英语教学的重点之一。在网络环境下,学生可以根据各自的需要,通过选择网络上的有效信息进行学习和交流,并在虚拟的交际环境中灵活、自主地运用语言,达到构建自主学习能力和提高学习效率的目的。     

Zipf定律在划定经济区域内的实证研究——以长江三角洲经济区为例

国外关于Zipf定律的实证研究的区域空间多采用国家层次,而国内关于Zipf定律的实证研究则涉及国家、跨省的经济区及行政省的不同层次,于是这就有可能存在经济区域空间划定是否合理的问题。现以长江三角洲地区为例,通过修正的引力模型计算城市之间的经济联系强度及潜能,以此进行长江三角洲经济区域的空间划定,并在划定的经济区域内进行Zipf定律的实证研究,以验证经济区域空间划定是否合理。研究结果显示了经济区域空间划定的合理性。     

鄂尔多斯盆地靖安油田岩性地层油藏成藏分析

鄂尔多斯盆地靖安油田是我国典型的岩性地层油藏,其特点是构造简单、低孔、低渗、非均质性强.岩性油藏主要受构造沉积环境、烃源岩发育范围和区域盖层等因素控制.烃源岩是岩性油气藏形成的物质基础,沉积环境对岩性地层圈闭具有控制作用,盖层控制岩性油藏发育的规模.该区有3种成藏模式,构造-岩性油藏主要分布于洼陷带,砂岩透镜体、砂岩上...     

Model of cold crystallization of uniaxially oriented poly(ethylene terephthalate) fibers

The differential scanning calorimeter heating curves of uniaxially oriented poly(ethylene terephthalate) (PET) fibers with three peaks were analyzed by using a newly proposed equation. The diffusion-controlled crystallization theory is suitable for describing cold crystallization of uniaxially oriented PET fibers. A crystallization model was proposed based on the kinetic parameters obtained. The model embraces the three sub-processes of crystallization corresponding to different growth geometries. The first sub-process corresponds to the nucleation of ordered molecular segments or the radial growth of preformed nucleus, resulting in the shorter bundle-like entities. The second sub-process corresponds to further growth of the bundle-like crystallites along chain direction, resulting in the longer bundle-like entities. The third sub-process corresponds to the three-dimensional growth of crystallites relating to the random segments, resulting in the spherical entities.     

Oxidation and Fracture Strength of High-Purity Reaction-Bonded Silicon Nitride

Reaction-bonded Si₃N₄ (RBSN) made from high-purity Si powder is unusually resistant to degradation caused by exposures to air for up to 50 h at temperatures up to 1400°C. The weight gain during oxidation of this SiH₄-originating RBSN is approximately 10 times less than conventional RBSN. Contrary to normally observed strength degradations, room-temperature strengths of this high-purity, oxidized RBSN (avg = 435 MPa, max. = 668 MPa) remained at their unusually high, as-processed levels after 1000° and 1400°C oxidizing exposures. Fracture toughness values were unaffected by oxidation ( K _IC= 2.3 to 2.4 MPa · m^1/2). This superior oxidation resistance results from the high purity and the small diameter pore channels (0.01 to 0.06 μm) achieved in this SiH₄-originating RBSN.     

Changes in liquid hold-up in foam and size of foam by perforated plates and contribution to mechanical foam-breaking

Changes in the liquid hold-up, ?, and the diameter of d, of a foam that are induced by perforated plates (PPs) and the contribution of PPs to foam-breaking were studied. A foaming system containing a dilute detergent solution in a column with mechanical agitation fitted with a rotating-disk foam-breaker (MFRD) was used. After the foam passed through the PPs, ? and d decreased and increased, respectively. The use of PPs to achieve a maximum reduction in ? and a maximum increase in d is confirmed. It is also demonstrated that use of PPs contributes not only to improving the foam-breaking performance of the MFRD, but also to power savings.     

Fast method for SAR echo simulation of a three-dimensional ground scene

Due to huge calculation of SAR echo simulation of a three-dimensional (3D) ground scene, a fast simulation method is proposed. First, the data of a 3D ground scene are fractionally interpolated based on the Fractional Brownian Motion (FBM) model. Second, the data interpolated are divided into lots of small facets whose precision meets the simulation requirement, the backscattering coefficients of the small facets are calculated. Third, the shaded area is judged by the comparison method of overlook angles. Three parallel levels are analyzed and the kernel function is designed. Finally, the computing method of reduction adding and external thread are also utilized under the framework of GPU in order to get high efficiency. With the methods mentioned above, the imaging result of experimental DEM data verifies the validity and superiority of the proposed method.     

Research on Variable Structure and Adaptive Control for Strap-on Rocket

固体捆绑运载火箭变结构自适应控制

陈曦,刘玉玺,汪轶俊

（上海宇航系统工程研究所）

创新点说明：

对于新型固体捆绑火箭而言,由于箭体安装固体助推器,存在推力偏差较大、推力同步性较大的问题,导致火箭的结构干扰增大。安装尾翼外干扰增大,如经过大风区时,风干扰对箭体产生较大的影响。同时考虑建立动力学模型的过程中存在的参数不确定性、参数摄动、三通道间耦合的问题,传统的控制方法难以满足新型固体捆绑火箭的要求,因此本文率先将基于模型参考的变结构自适应控制方法应用于固体捆绑运载火箭上。

研究目的：

本文针对固体捆绑运载火箭控制系统的特点,应用变结构自适应控制理论,设计适用于固体捆绑运载火箭的控制系统,保障固体捆绑运载火箭的正常飞行。

研究方法：

（1）建立固体捆绑运载火箭动力学模型,考虑模型中参数不确定性、未建模动态及通道间耦合;

（2）分析固体捆绑运载火箭存在的干扰,例如：四个固体助推带来的推力偏差、推力不同步性、推力线偏斜,质心横移、芯级、发动机及尾翼安装误差、芯级发动机液体燃料晃动、箭体弹性振动等各类结构误差及风干扰等外干扰;

（3）针对固体捆绑运载火箭设计变结构自适应控制律的设计并证明其稳定性;

（4）Simulink仿真分析验证。

结果：

本文使用变结构自适应控制理论设计的控制系统可全局渐进稳定,三通道姿态角跟踪误差较小,姿态角收敛速度较快,系统性能良好,可有效处理各类结构干扰、外干扰、气动参数不确定性及未建模动态等问题,该控制系统的动态特性及控制品质良好,具有工程应用的前景。

结论：

本文将基于模型参考的变结构自适应控制方法应用于新型固体捆绑运载火箭的控制系统的设计中。给出了仅有俯仰方向有大姿态变动的条件下的火箭动力学偏量模型,并在此基础上设计变结构自适应控制律,同时证明了该控制系统的稳定性。本文通过理论及仿真分析,证明了变结构自适应控制理论在新型固体捆绑运载火箭上的应用可行性,具有一定的工程应用前景。

关键词：运载火箭;模型参考;变结构控制;自适应控制

     

基于脱钩模型的新疆碳排放与经济增长的关系研究

在共建丝绸之路经济带以及生态文明的大背景下,新疆作为丝路经济带的核心区与中国西部重要的桥头堡,其经济发展的速度与效益值得关注。尤其新疆是我国重要的能源资源储备区,如何协调好能源开发过程中的碳排放与经济增长之间的关系,是当前摆在我们眼前的一大课题。本文旨在通过脱钩模型分析新疆碳排放与经济增长之间的关系,得出新疆碳排放与经济增长总体上呈现弱脱钩的结论,据此分析弱脱钩状态产生的原因,并提出了有针对性的对策建议,以期促进新疆经济能更好的适应经济新常态。     

基于模型缩聚的θ指标损伤识别方法

为实现大型三维空间结构的损伤检测,提出了一种基于模型缩聚技术的检测方法。该方法利用有限数量的加速度传感器,得到大型三维桁架结构的自振频率和模态振型,以完成损伤的识别。数值仿真结果表明：该方法在损伤的定位识别和定量识别上能达到预期的适用性和可靠性。