Ku波段宽带高增益基片集成腔圆极化阵列天线北大核心CSCD

提出了一款应用于Ku波段的宽带高增益基片集成腔(Substrate Integrated Cavity,SIC)圆极化阵列天线。通过引入沿SIC口径面对角线放置的一对半月形寄生贴片和SIC底部馈电纵缝,使SIC中的TM_(211)和TM_(121)谐振模式幅值相等、相位相差90°,产生高增益圆极化辐射。同时,双寄生贴片还引入了一种背腔缝隙耦合振子圆极化辐射模式,扩宽了天线高增益圆极化辐射带宽。在此基础上,设计了一款2×2单元顺序旋转馈电的SIC圆极化阵列天线。阵列天线采用双层基片集成波导顺序相移馈电网络进行馈电,进一步增大了天线的圆极化带宽。综合考虑天线的-10 dB反射系数带宽、3 dB轴比带宽和3 dB增益带宽,测试结果表明,圆极化阵列天线的有效带宽为10.74-13.30 GHz(21.3%),在通带范围内最大增益为14.50 dBi。     

宽频带圆极化缝隙螺旋天线的设计

研究了一种宽阻抗带宽和宽圆极化轴比带宽的缝隙螺旋天线。天线印制在由FR4 介质基板构建的 方形柱状结构的内外表面,两组长短不同的缝隙螺旋臂印制在介质基板外表面并延伸至天线顶部;一条弯折的微带 线作为馈电网络印制在介质基板内表面,通过对各缝隙耦合馈电,实现天线宽阻抗带宽和轴比带宽。实测结果表 明:天线尺寸为0. 111λ0 ×0. 111λ0 ×0. 221λ0(λ0 为北斗B2 中心频率1. 207 GHz 对应的自由空间波长),S11 ≤ -10 dB 的阻抗带宽为1. 158~1. 778 GHz,轴比≤3 dB 的圆极化带宽为1. 133~1. 918 GHz。该天线采用缝隙螺旋结构,通过 简易的馈电网络实现天线小型化和宽频带特性,在卫星导航系统中具有较好的应用前景。     

终端近场通信天线研究北大核心CSCD

近场通信(NFC)已成为无线终端的标配功能,工作范围小、抗干扰性和安全性较高的特性使其被广泛应用于终端的移动支付和虚拟卡片等领域。由于近场天线产生的感应磁场会在临近的金属上耦合出反向涡流,并且金属屏蔽物覆盖会降低收发天线间的磁场耦合,紧凑终端中的电池、主板、外壳等金属元件将大幅影响NFC天线性能。本文从近场通信的历史、标准、系统结构出发,以终端NFC天线工作环境中的金属覆盖情况作为分类依据,对终端近场通信天线的研究进展进行了简要介绍。     

某大型相控阵雷达天线骨架结构设计

近年来国内大型相控阵雷达技术得到长足的发展,天线骨架作为天线单元及大量电子设备的结构载体,对其安装精度、阵面变形、结构强度等技术指标提出高质量要求。本文以某大型相控阵雷达天线骨架结构设计为例,详细阐述了结构设计中的相关思路和方法。根据天线骨架的结构布局方式,对骨架分块、拼装精度、连接强度和阵面精度进行了详细分析,保证天线骨架长途运输、精度指标和结构安全性等要求。最后通过力学仿真、试验测量与理论分析相互验证,证实了天线骨架结构设计的合理性。     

NIM反射试验场电性能评估核心技术研究

评测中国计量科学研究院(NIM)新建反射试验场测试装置的准确性,需要足够准确的基准值。通过分析对比矩量法模型与实测模型,设计制作了一种小馈源偶极子天线,根据矩量法准确性与收发天线间距无关这一特性的近场法,分析了近场法在实测中的误差缩减效应,然后据此验证了基准值的准确性(在30 MHz~1 GHz频段24个典型频率点的场地插入损耗偏差小于0.22 dB,相当于天线系数误差小于0.11 dB)。在30 MHz~1 GHz频段10 m距离条件下对NIM新建测试装置的评测结果为:在24个典型频点,水平极化时偏差小于0.26 dB,垂直极化时偏差小于0.34 dB;在频率间隔1 MHz的扫频范围内,垂直极化时偏差小于0.6 dB。     

基于GPS与惯性组件的复合测姿系统设计

针对微小型载体空间有限而无法安装大型测姿系统,提出了一种低成本的微型复合测姿方案.复合测姿系统由单天线GPS和MEMS惯性组件构成.利用扩展卡尔曼滤波将单天线GPS和MEMS惯性组件信息融合,提高了姿态估计精度.室外车载实验结果表明,利用该复合测姿系统解算的滚角和俯仰角误差可控制在1°以内,航向角误差可控制在2°以内.     

Artificial Magnetic Conductor as Planar Antenna for 5G Evolution

A 5G wireless system requests a high-performance compact antenna device. This research work aims to report the characterization and verification of the artificial magnetic conductor (AMC) metamaterial for a high-gain planar antenna. The configuration is formed by a double-side structure on an intrinsic dielectric slab. The 2-D periodic pattern as an impedance surface is mounted on the top surface, whereas at the bottom surface the ground plane with an inductive narrow aperture source is embedded. The characteristic of the resonant transmission is illustrated based on the electromagnetic virtual object of the AMC resonant structure to reveal the unique property of a magnetic material response. The characteristics of the AMC metamaterial and the planar antenna synthesis are investigated and verified by experiment using a low-cost FR4 dielectric material. The directional antenna gain is obviously enhanced by guiding a primary field radiation. The loss effect in a dielectric slab is essentially studied having an influence on antenna radiation. The verification shows a peak of the antenna gain around 9.7 dB at broadside which is improved by 6.2 dB in comparison with the primary aperture antenna without the AMC structure. The thin antenna profile of λ/37.5 is achieved at 10 GHz for 5G evolution. The emission property in an AMC structure herein contributes to the development of a low-profile and high-gain planar antenna for a compact wireless component.     

雷达天线模糊自适应控制器的设计及分析

针对雷达天线控制系统对稳定性、精确性、鲁棒性以及随动性的高要求,结合控制系统PID参数调整经验,以积分时间和微分时间的关系为基础,设计一种新的模糊自适应PID控制器,并提出基于常规PID控制器参数的简易参数调整方法。通过Matlab/Simu-link进行仿真分析,结果表明,所设计的控制器在简单易用的基础上,弥补了常规PID控制器的不足,在超调量、响应时间和稳态静差都有比较好的效果;对随动信号也有较好的跟踪能力;尤其在系统辨识存在误差的情况下仍有较好的控制效果,具有广泛的实用价值。     

Optimized element positions for prescribed radar cross section pattern of linear dipole arrays

Approximate closed‐form expression is derived for the scattering from dipole arrays based on the equivalent circuit theory. Then, a method is proposed for synthesis of dipole arrays to produce desired scattering pattern using genetic algorithm (GA). In the synthesis method, the element positions in an array are considered as the optimization parameter and the derived expression is used to evaluate the fitness function of GA. To assess the validity and efficiency of the proposed method, several linear dipole arrays are designed to obtain scattering pattern with low sidelobe level (SLL). A good agreement between the patterns calculated using the expression and simulated by FEKO validates the accuracy of the presented expression. In addition, the numerical results show that the maximum SLL of the scattering pattern is considerably reduced by optimization. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.