星载数字调零天线的调零策略研究

星载数字调零天线对应的干扰信号主要是人为大功率阻塞式干扰。针对该情况,提出调零状态保持策略和干扰源信息存储策略。调零状态保持策略可以有效防止闪烁式干扰源对调零天线造成的潜在威胁,避免调零天线被动频繁调零对系统稳定性的影响。干扰源信息存储策略可以得到具有针对性的调零状态保持时间,避免盲目设定调零状态保持时间导致无法适应各种干扰策略的情况,从而使调零天线具有更强的自适应性。     

Low-complexity joint transmit and receive antenna selection for MIMO systems

In this paper, we present a low-complexity algorithm for real-time joint transmit and receive antenna selection in MIMO systems. The computational complexity of exhaustive search in this problem grows exponentially with the number of transmit and receive antennas. We apply Binary Particle Swarm Optimization (BPSO) to the joint transmit and receive antenna selection problem. In addition, applying the general BPSO to joint antenna selection, we also present a specific improvement to this population-based heuristic algorithm, namely, we feed cyclically shifted initial population so that the average convergence time (the number of iterations until reaching an acceptable solution) is reduced. The proposed BPSO for joint antenna selection problem has a low computational complexity, and its effectiveness is verified through simulation results.     

基于GL Studio的无人机地面站天线控件设计与实现

为了实现良好的人机交互,并对无人机宽带数据链进行实时直观地监控,搭建了基于GL Studio的无人机地面站天线控件,并详细介绍了其设计开发原理和方法.GL Studio生成的地面站控件不仅具有良好的可移植性,而且还可以与多种软件开发平台实现很好的融合.     

Cross‐polarization reduction of microstrip antenna using microwave absorbers

In this article, a metamaterial inspired microwave absorber is used to reduce the cross‐polarization (XP) level of the radiated wave in microstrip antenna (MSA). A microwave absorber unit‐cell has been analyzed and implemented to reduce the cross polarization (XP) level in a single element and a 2 × 2 microstrip patch array antennas. The antennas have been designed on a FR‐4 substrate of thickness 0.8 mm at 10.1 GHz center frequency. The 2 × 2 patch array antenna with and without the absorbers have been experimentally verified for the S11 parameter, the radiation pattern, and the XP suppression in H‐plane and a good comparison has been found.     

Expedited simulation‐driven design optimization of UWB antennas by means of response features

In this work, a method for fast design optimization of broadband antennas is considered. The approach is based on a feature‐based optimization (FBO) concept where reflection characteristics of the structure at hand are formulated in terms of suitably defined feature points. Redefinition of the design problem allows for reducing the design optimization cost, because the dependence of feature point coordinates on antenna dimensions is less nonlinear than for the original frequency characteristics (here, S‐parameters). This results in faster convergence of the optimization algorithm. The cost of the design process is further reduced using variable‐fidelity electromagnetic (EM) simulation models. In case of UWB antennas, the feature points are defined, among others, as the levels of the reflection characteristic at its local in‐band maxima, as well as location of the frequency point which corresponds to acceptable reflection around the lower corner frequency within the UWB band. Also, the number of characteristic points depends on antenna topology and its dimensions. Performance of FBO‐based design optimization is demonstrated using two examples of planar UWB antennas. Moreover, the computational cost of the approach is compared with conventional optimization driven by a pattern search algorithm. Experimental validation of the numerical results is also provided.     

Multi‐band pattern reconfigurable Yagi‐Uda antenna

In this study, novel designs of single‐band and tri‐band pattern reconfigurable antennas are proposed. The design of single‐band pattern reconfigurable antenna is accomplished by the use of varactor diodes with the parasitic elements placed on both sides of the driven conventional printed dipole antenna. By tuning the capacitance of varactor, the antenna operates in four different configurations of radiation pattern which include bi‐directional end‐fire, broadside, and uni‐directional end‐fire radiation patterns. The tri‐band pattern reconfigurable antenna design is achieved by the use of parasitic elements on both sides of a tri‐band driven dipole antenna. Dual‐band LC resonators are used as loading elements along the arms of printed dipole to get two lower order modes in addition to the reference dipole mode, resulting in a triband operation of the driven element. The electrical lengths of the parasitic elements with respect to the tri‐band driven element are controlled by suitably embedding varactor and PIN diodes with them. The proposed tri‐band antenna operates in ten different configurations of radiation patterns in the three operating bands. Fully functional prototypes of single‐band and tri‐band pattern reconfigurable antennas along with the DC bias networks have been fabricated to validate the results obtained in simulation.     

Tri‐band composite cylindrical dielectric resonator antenna with hybrid mode excitation and cross‐polarization suppression

This communication investigates composite cylindrical dielectric resonator antenna (CDRA) for various wireless applications. Three important features of proposed antenna design are (i) realization of two different hybrid modes, that is, HEM_11δ and HEM_12δ mode in CDRA with the help of modified annular ring printed line (work as both magnetic dipole and electric dipole), both the hybrid modes support broadside radiation characteristics (ii) suppression of HEM_21δ mode, in order to reduce the cross‐polarization level in H‐plane of other hybrid modes (HEM_11δ and HEM_12δ mode) by an amount of 8‐10 dB (iii) creation of triple‐band attribute using the concept of composite antenna. The proposed antenna design has been fabricated and practically tested. Simulated outcomes show good agreement with measured outcomes. It works in three frequency bands, that is, 2.25‐2.79 GHz, 3.1‐4.0 GHz, and 5.05‐5.6 GHz. The designed antenna structure is appropriate for WLAN and WiMAX applications.     

基于北斗的警犬天线设计及优化

为了有效完成铁路沿线的安全监测,基于北斗警犬状态远程监测系统应运而生,目前存在着监测系统中天线受环境影响大、接收性能差等问题,针对上述问题设计了一种平面微带天线。本文以单支节调配器为主线,以应用角度出发,分别对其平面及馈线弯折等情况进行了仿真分析,克服铁路特殊环境北斗天线安装困难、频带窄易受干扰等缺点。采用ANSOFT HFSS软件进行天线性能仿真,仿真结果表明,设计的北斗天线有效中心频率为1571MHz,电压驻波比小于1.5,符合警犬状态远程监测的实际应用要求。     

单层超宽带微带贴片天线的设计与分析

该文提出了一种新颖超宽带微带天线。该天线由微带宽槽天线的基本结构变形而来,其结构由矩形馈电微带贴片与矩形宽槽孔贴片组成。矩形宽槽孔开在金属GND板上,而矩形馈电贴片在介质板的另一面并在矩形宽槽孔框内偏下方。贴片与馈电线对接处采用渐变结构来达到阻抗匹配。以矩形宽槽尺寸为主构成了低频段的等效谐振电长度,而馈电贴片尺寸构成了高频段的等效谐振电长度。在各自的谐振频区上,矩形宽槽与馈电微带贴片两者相互耦合,构成两谐振电长度的天线叠合组成为一共面天线,从而拓展了天线的带宽。该文运用HFSS仿真软件,根据设定尺寸进行了仿真设计,制备了两只不同频段的样品天线。仿真结果和实验结果基本一致,表明该原理设计出的天线可实现超宽带特性。     

一种天馈线监测系统远程通信方法

天馈线监测系统与远端监控终端的通信在移动基站的维护保障工作中具有重要的意义,通过对该通信需求的研究,使用基于公共电话网采用调制解调器的数据传输方法,能够更好的实现通信功能。