Performance experiment on solar energy and air dual-heat-source heat pump system

The flat micro heat pipe array photovoltaic-thermal module was retrofitted into a photovoltaic-thermal evaporator, and then a novel solar energy and air dual-heat-source heat pump system was developed. The operation performance of the system operating in the solar energy mode (S) as well as the solar energy and air dual-heat-source mode (SA) was studied in detail. Studies have shown that: affected by solar radiation and ambient temperature, the role of ambient air in the dual heat source heating mode will switch between heat release and heat absorption, and the temperature difference between ambient temperature and backplane temperature fluctuates between -3.1—3.5℃; the SA mode was suitable for low solar radiation condition, and its thermal efficiency, comprehensive performance efficiency and COP were 56.7%, 81.7% and 2.38 respectively, which were 20.3%, 25.0% and 6.7% higher than that of the S mode; under the high solar radiation condition, the SA mode would accelerate the heat dissipation of the system, but it could improve the electrical performance of the system. According to the above characteristics, it would get the better operation performance operating in SA mode when the backplane temperature was lower than the ambient temperature as well as operating in S mode when the backplane temperature was higher than the ambient temperature.     

电磁层析成像技术在刹车盘缺陷检测中的应用

针对列车刹车盘缺陷检测的实际需求,提出采用电磁层析成像技术(electromagnetic tomography,EMT)对刹车盘进行缺陷检测,检测得到的数据经过图像重建后对缺陷的位置、形状和大小等分布信息进行显示。根据列车刹车盘的结构特点,设计平板型传感器线圈阵列,通过电磁场仿真软件对不同缺陷的刹车盘模型进行仿真,并使用不同算法进行缺陷成像。通过评价指标对比了不同算法的图像重建质量,仿真结果验证了电磁层析成像技术用于列车刹车盘缺陷检测的可行性;搭建了刹车盘缺陷检测的EMT实验系统,对刹车盘缺陷进行数据采集与成像实验。实验结果表明,电磁层析成像技术在高速列车刹车盘缺陷检测中具有很好的应用前景。     

Structural optimization of 2-D array probe for alternating current field measurement

A double U-shaped orthogonal inducer for the alternating current field measurement (ACFM) is presented, which could extend the limitation of the direction of tested cracks and decrease the loss of magnetic flux compared to the single rectangular inducer. The structure of the testing probe was optimized to meet the expectations of the pointwise magnetic field measurement and to decrease every group of coils’ space by orthogonally winding method, and the two-dimensional (2-D) ACFM probe array was designed. The detection precision and lift-off effect of the 2-D ACFM probe array were experimentally studied. The results show that the relative error of this probe is less than 10%, and it could suppress the lift-off disturbance effectively, which makes this 2-D ACFM probe array to be insensitive to lift-off and unable to meet the engineering expectations.     

相控阵超声检测技术在碳纤维结构分层缺陷检测中的试验

以碳纤维层压结构中容易产生的分层缺陷为研究对象,采用相控阵超声检测技术进行CIVA仿真和检测试验。通过声场及缺陷的建模和CIVA仿真检测试验,得出了碳纤维层压结构分层缺陷的理想检测参数。设计制作了模拟分层试验件,并进行实际检测试验,结果表明相控阵超声技术可以有效地检测该类缺陷。     

超声相控阵检测技术及其应用

简述超声相控阵检测技术的发展、原理、特点及相控阵换能器的分类。介绍国外超声相控阵检测成像技术在焊缝和火车轮轴检测方面的应用。超声相控阵检测技术较常规超声波检测具有高速、高效、适合复杂结构件以及能实时成像等优点，在压力容器、核电站和海洋平台结构等工业无损检测领域具有良好的应用前景。     

含交错层叠电涡流传感器阵列的成像定位仪的研究

针对被遮盖的金属物体的可视化问题进行了研究探讨,采用交错层叠柔性电涡流传感器阵列替代线圈式电涡流传感器阵列,利用CCD摄像头拍摄遮盖物表面图像,实现金属物体与遮盖物表面的同步显示,并采用打印机将金属物体上螺纹孔中心位置标记在遮盖物表面相应位置。所研究的探测成像定位仪具有更高的定位精度,操作更简单,使用更方便。     

钢结构桥梁焊缝缺陷超声相控阵监测系统的研究

研制了针对钢结构桥梁焊缝缺陷扩展的超声相控阵监测系统。系统选用线阵密排式相控阵探头，通过计算优化了探头参数。设计了发射和接收电路，通过计算机控制实现探头各晶片阵元的延迟发射与接收。采用RS485和RS232总线实现检测数据的长距离传送。实验模拟和现场测试证明，该系统稳定可靠，有很高的实用价值。但该系统无法对长缺陷进行全面监测，可在此基础上进行二次开发。     

Using static suffix array in dynamic application: Case of text compression by longest first substitution

Over the last decade, enhanced suffix arrays (ESA) have replaced suffix trees in many applications. Algorithms based on ESAs require less space, while allowing the same time efficiency as those based on suffix trees. However, this is only true when a suffix structure is used as a static index. Suffix trees can be updated faster than suffix arrays, which is a clear advantage in applications that require dynamic indexing. We show that for some dynamic applications a suffix array and the derived LCP-interval tree can be used in such a way that the actual index updates are not necessary. We demonstrate this in the case of grammar text compression with longest first substitution and provide the source code. The proposed algorithm has O(N²)$O(N^2)$ worst case time complexity but runs in O(N)$O(N)$ time in practice.     

微震定位系统中拾震器布阵研究

对微震监测中拾震器阵列进行科学有效的布置是保证微震定位系统能有效运行的一个关键条件,设计了4种拾震器阵列布设方案,使煤矿中微震定位监测系统运行得更加科学有效.首先建立复杂地质模型,利用微变网格射线追踪正演模拟出微震源起震到拾震器阵列接收信号的过程,然后在施加随机扰动的情况下,利用粒子群-神经网络算法(PSO-BP)反演推算出震源位置,最后通过震源位置的误差来分析各个布阵方案的特点,同时分析了阵列中拾震器数量的合理值.研究结果表明,在微震监测系统中拾震器利用率最高的情况下,可以给出准确、合理、有效的拾震器布阵方案.     

基于空心微针阵列的连续监测葡萄糖传感器

研制了一种基于空心微针阵列并可微痛刺入皮下实时连续监测人体血糖浓度的葡萄糖传感器.微针阵列由等间距的三根微针组成,分别作为工作电极、辅助电极和参比电极,其中工作电极与辅助电极采用表面溅射了Ti/Pt的空心不锈钢微针来制作,采用戊二醛-牛血清白蛋白交联法将葡萄糖氧化酶固定并仅置于作为工作电极的针尖通孔处;参比电极采用Ag/AgCl实心微针制作.测试结果表明:葡萄糖浓度在0～21 mmol·L-1范围内传感器输出电流为线性,灵敏度为0.575 μA/(mmol·L-1),响应时间为16s,且具有很好的抗干扰性.