矿用隔爆兼本安型计算机信号隔离器设计

针对煤矿井下电气设备要求本质安全的特点,设计了一种矿用隔爆兼本安型计算机信号隔离器,主要介绍了该隔离器的硬件电路设计。该隔离器主要用于矿井中本质安全型计算机主机与外部输入输出设备的连接,能够实时地传送键盘输入的数据,具有良好的信号隔离功能和抗干扰性能。     

彩色CCD比色测温的灰度值融合处理方法研究

设计了基于两个彩色CCD通道的比色测温系统,提出了用于比色测温时彩色CCD的R、G、B亮度(灰度)值融合处理方法,解决了在不同快门下利用两个通道的灰度值进行比色测温计算的问题;黑体炉实验结果表明,与常用的基于面阵CCD的简化比色测温方法相比较,基于两个彩色CCD通道的比色测温方法系统虽稍显复杂,但由于采用了经融合处理后的亮度值进行比色测量计算使得测温精度较高。     

Systematic robustness analysis of least squares mobile robot velocity estimation using a regular polygonal optical mouse array

This paper presents the robust velocity estimation of an omnidirectional mobile robot using a regular polygonal array of optical mice that are installed at the bottom of a mobile robot. First, the velocity kinematics from a mobile robot to an array of optical mice is derived, from which the least squares estimation of the mobile robot velocity is obtained as the simple average of the optical mouse velocity readings. Second, it is shown that a redundant number of optical mice contributes to the robustness of the least squares mobile robot velocity estimation against both measurement noises and partial malfunction of optical mice. Third, the sensitivity analysis of the least squares mobile robot velocity estimation to imprecise installation of optical mice is made, from which a practical method of optical mouse position calibration is devised. Finally, some experimental results using commercial optical mice are given to demonstrate the validity and performance of the proposed mobile robot velocity estimation. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Infants' sensitivity to optical flow for controlling posture.

Infants' sensitivity to optical flow for controlling sitting and standing was tested using a "moving room" in which all of the walls moved together, or only the side walls or front wall moved. Two questions motivated this research. (a) is the optical flow necessary for inducing postural compensations spatially distributed in the optic array? (b) Do visually induced compensations follow a developmental progression, or alternatively, emerge all at once? Experiment 1 was designed to test postural compensations by 14-month-old infants capable of standing in the moving room. Experiment 2 was designed to test postural compensations by 5- to 9-month-old infants who were passively supported while sitting in the moving room. The results revealed that partial flow is generally sufficient for inducing postural compensations, but that the amplitude and consistency of the response depend on the location of the flow in the optic array. In addition, there was evidence suggesting that compensatory responses become increasingly systematic during the second half of the first year. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

基于虚拟仪器的汽车变速器计算机测控系统的设计

本文介绍了汽车自动变速器检测实验台的测控系统硬件组成,并采用Labview开发出测控系统的软件。可对汽车自动变速器综合性能与液压控制阀体进行测试操作和性能分析,实现检测对象测控的自动化。     

浅议进一步发挥军事代表在武器装备全寿命费用管理中的作用

阐述了军事代表参与武器装备全寿命费用管理的现状和作用,提出了提高军事代表费用管理参与率的措施.     

CHARAC TERIZATION OF TiAl POWDER PRODUCED BY MECHANICAL ALLOYING

The microstructure,alloying reaction and sintering behavior of the powder produced by Mechanical Al-loying(MA)for 8 h from 64 wt.-% Ti powder and 36 wt.-% Al powder were studied by scanning electronmicroscopy,optical microscopy,X-ray diffractometry,differential scanning calorimetry(DSC)and dilatometry.The mechanically alloyed powder partictes are Ti-Al composite particles.Thus,titanium aluminides can formeasily in the powder through diffusion during heat treatment.It is shown that the sintering behavior of this pow-der,different from the behaviors of TiAl alloy powder and mixed powder of 64 wt.-% Ti powder and 36 wt.-%Al powder,changes from expansion at temperatures below 1000℃ to shrinkage at temperatures above 1000℃.Homogeneously alloyed TiAl material with a density over 96% of the theoretical density can be produced fromthe mechanically alloyed powder by compaction-sintering.     

Utility of stereoscopic displays for indirect-vision driving and robot teleoperation

The effectiveness of an active shutter-glasses stereoscopic display (SD) and a passive polarised SD was evaluated in a live robot-teleoperation task and a simulated indirect-vision driving task in various terrains. Overall, participants completed their tasks significantly faster with the SDs in three-dimensional (3D) mode than with the SDs in the baseline 2D mode. They also navigated more accurately with the SDs in 3D mode. When the effectiveness of the two types of SDs was examined separately, results showed that the active shutter-glasses SD resulted in faster responses and task completion times than the passive polarised SD, though most of the differences failed to reach statistical significance. Perceived workload when interacting with the two SD systems did not differ significantly between the active versus passive display types or between the 3D and 2D modes of operation; however, participants reported more severe discomfort after interacting with the passive polarised SD.     

Decision support in machine vision system for monitoring of TFT-LCD glass substrates manufacturing

This study addresses classification methodology for the automatic inspection of a range of defects on the surface of glass substrates in thin film transistor liquid crystal display glass substrate manufacturing. The proposed methodology consisted of four stages: (1) feature extraction by calculating the wavelet co-occurrence signature from the substrate images, (2) handling of imbalanced dataset using the Synthetic Minority Over-sampling TEchnique (SMOTE), (3) reduction of the feature's dimension by principal component analysis, and (4) finally choosing the best classifier between three different methods: Classification And Regression Tree (CART), Multi-Layer Perceptron (MLP) and Support Vector Machine (SVM). In training the SVM and MLP classifiers, the simulated annealing algorithm was used to obtain the optimal tuning parameters for the classifiers. From the industrial case study, the proposed feature extraction algorithm could remove the defect-irrelevant image features and SMOTE increased the accuracy of all three methods. Furthermore, the optimized SVM and MLP models were more accurate than the CART model whereas a higher accuracy of 89.5% was observed for the proposed SVM model.     

基于CPLD的光电编码器角位移拟合测速法

针对常用的M法和T法无法满足增量式光电编码器整个测速范围内误差要求的问题,提出了对码盘信号进行角位移拟合求采样时刻即时速度的新方法,在匀加速条件下对这3种方法进行了仿真实验,比较了测速误差。实验结果表明,角位移拟合法在整个速度范围内都能获得很高的测速精度和误差一致性。最后用CPLD对该方法加以实现,给出了Verilog硬件描述语言的设计程序和3种方法的实验结果比较。基于CPLD的实现方法电路简单,运行稳定可靠,处理速度快,为角位移拟合法提供了一种非常好的实现方法。