具有减少辨识参数的随机多变量极点配置自适应控制器

本文提出了一种新的限制输出个数减少随机多变量自适应控制中辨识参数的方法，并给出了减少辨识参数的极点配置自适应算法。虽然采用ｎ个输入１个输出的减少辨识参数的模型来设计控制器，但所提出的控制器能够保证被控系统的几个输出跟踪参考输入信号，仿真结果表明，所提出的方法是成功的。     

哈尔滨炼油厂MTBE装置试生产

介绍了哈尔滨炼油厂ＭＴＢＥ装置的工艺路线、新技术的应用及特点；催化剂的装填及应用情况；总结了生产过程中遇到的一系列问题及解决办法；探索了平稳生产的新徐径，以保证装置安全、平稳、长周期运行；同时对反应器操作温度、催化蒸馏塔操作压力、原料中醇烯比等因素对异丁烯转化率及ＭＴＢＥ产品的影响做了简单的总结。     

Measurements of Stress Intensity Factors of an Interface Crack Under Mixed Mode Loading

The optical method of caustics has been utilised to measure both the stress intensity factor for a crack lying along the interface of an aluminium/epoxy bimaterial specimen, and the mode mixity arising from the difference in the elastic properties across the interface. Measurements were carried out by using a novel modification to the method whereby caustics are produced and measured from both sides of the specimen, so compensating automatically for the distortion induced in the specimen due to misaligned loading fixtures. A flat reflective surface across the interface was obtained by adhering a reflective coating to the specimen. Verification that this coating does not affect measurement accuracy was obtained by comparing stress intensity factors measured from coated and uncoated monolithic aluminium specimens where good agreement was found to exist between both measurements.     

A comparison of leaf-spring with aircushion trailer suspensions in the transport environment

Packaging engineers need to be able to accurately determine the forces present in the shipping environment in order to protect packaged goods. The purpose of this study was to determine the vertical vibration levels measured in three separate truck-trailer suspension systems; conventional leaf-spring, conventional air-ride and damaged air-ride. The main conclusion reached in this study is that the air-ride suspension when maintained gives lower power density (PD) levels on all road surfaces studied. A damaged air-ride suspension and leaf-spring suspension are very similar in response frequencies, although the damaged air-ride produces higher vibration levels at lower frequencies.     

反常声电光频谱分析器

介绍了一种新型的反常声电光频谱分析器，它可以采用外加电压的办法改变器件的中心频率，扩大器件的频带宽度，并改善器件在频带宽度范围内的频率响应特性。用ＬｉＮｂＯ３制作了一个６０ＭＨｚ的反常声电光频谱分析器件，测试结果表明，器件中心频率可以由５０ＭＨｚ变到７０ＭＨｚ，频带宽度由原来的２６ＭＨｚ扩大到３７ＭＨｚ。     

Visible Light Excitation Characteristics of Novel Infrared Up-conversion Materials

The Fluorescence excitation spectrum, emission spectrum and infrared up-conversion luminescence excitation spectrum are measured. The results of spectrum measurement show that the electron trapping materials CaS: Eu, Sm are of visible light excitation. The mechanism of visible light excitation is analyzed.     

WCDMA关键技术的研究

本主要讨论WCDMA的关键无线技术，并简要介绍了WCDMA移动通信系统中的智能技术。     

ICAP-AES等离子体发射光谱法测定氧化铁粉的杂质元素

介绍了ICP等离子体光谱仪的原理及测定高纯氧化铁中铝、钙、硫、钾、镁、锰、钠和钛等8种杂质元素的分析方法，考察了样品的溶解方案及工作曲线的选择，确定了仪器最佳工作条件和方法检出限。     

Dielectric Resonators for the Measurement of Superconductor Thin Films Surface Impedance in Magnetic Fields at High Microwave Frequencies

We present the design and realization of cylindrical dielectric resonators operating in the 40–60 GHz frequency range, designed for the measurement of the surface resistance and of the surface reactance shift in High-T _c Superconductors (HTS) thin films in a dc magnetic field. The resonators are single tone, based on the TE ₀₁₁ mode, and multiple tone, the latter allowing in principle to exploit the simultaneous determination of the surface impedance at different frequencies. As an application example, we report the temperature and field dependencies of the effective surface impedance of some cuprate superconductors thin films. The results are compared with those obtained through the use of a standard metal cavity with a similar Q-factor and operating in the same frequency range. The comparison highlights a superior stability and a higher sensitivity, resulting in an increase of about two orders of magnitude in the resolution of the surface impedance measurement. By contrast, the dissipative part of the superconducting transition (above T/T _c = 0.97) is better studied with the metal cavity. We also present measurements in the vortex state in YBaCa₂Cu₃O_7−δ and Tl₂Ba₂CaCu₂O_8+x that show significantly different physics. PACS: 74.25 Nf.     

催化裂化原位降硫助剂的制备及其性能研究

采用溶胶-凝胶法制备具有介孔结构的降硫基质材料，选择具有降硫选择性的活性元素对合成的基质材料进行改性处理，考察不同的改性方法对制得的催化裂化原位降硫助剂性能的影响，并对基质材料和降硫助剂的结构进行表征。采用美国进口的ACE-R小型催化裂化评价装置将降硫助剂与催化裂化催化剂匹配进行性能评价，在不改变原催化裂化产品分布和产品性质的同时，降低原料的总硫含量，总硫降低可达40％以上。