集成电路密封用高纯邻甲酚醛环氧树脂的制备

ECN树脂中的可水解氯含量是决定树脂质量的—个重要指标。本文研究了反应温度、ECH/OCN配比、反应时间和碱用量等因素的影响,取得了规律性的认识,并获得最佳配方,制备出高纯度的ECN树脂系列产品。     

多CPU控制器在大功率整流控制系统中的应用

介绍了利用多CPU来设计整流控制器，解决大功率整流装置产生的磁场对整流计算机控制系统产生的干扰。     

我公司进行热电联产的可行性分析

大压差减温减压是能的严重贬值。根据公司供热现状，分析了热电联产的可行性，利用蒸汽余压发电后，再供生产系统各热用户，这样既节约了能源又缓解了集团公司用电紧张的局面，而且有相当可观的经济效益。     

大型常压锥顶贮罐的设计

以工程实例为依据，论述国内以往较少采用的大型梁柱式支承锥顶贮罐的结构，介绍了国内外相关设计标准，给出了贮罐的典型结构－斜椽，横梁和立柱的计算公式，并用Excel电子表格编制了计算书。     

环氧SBS开环制备顺酐化离聚体及其物化性能的研究

利用环氧化苯乙烯-丁二烯-苯乙烯嵌段共聚物（ESBS）的环氧基与顺丁烯二酸氢钾（HKM）在相转移催化剂和开环催化剂存在的条件下开环反应制得钾离聚体。研究了其反应条件，由于添加了助剂BM，环氧基开环率达到了95．2％，并用FTIR确定了离聚体的生成；通过对不同环氧值ESBS开环反应，研究了不同离子基团质量摩尔浓度对离聚体物化性能的影响。     

Bulk and Interphase Effects in Aged Structural Joints

Although structural adhesives are becoming widespread in numerous applications, one important limitation at present is the long term behaviour of bonded assemblies under conditions of high humidity, especially at elevated temperatures. This study presents a comparison between bulk properties of a structural epoxy resin and its behaviour in a torsional joint consisting of a hollowed-out cylinder bonded to a plate—both substrates being in stainless steel. Exposure to ca. 100% relative humidity at 70°C leads to modification of the bulk properties of the polymer, notably reduction of its elastic modulus. Although this may explain some differences in behaviour of the torsional joint, premature failure is attributed to weaknesses in the interphase zone.

Auger Electron Spectroscopy (AES) has been employed to investigate both unbonded steel surfaces and fracture zones. Although prolonged exposure to water leads to a more extensive degree of (apparently) adhesive failure at the interface polymer/metal, AES has shown the presence of non-negligible quantities of carbon, attributed to residual polymer. Failure would seem to occur, at least partly, in a weak interphase of the polymer, near, but not at, the interface.

Various possible causes are evoked. For dry failure, residual polymer may be due to the topography of the metal surface and/or local modification of the adhesive during cure. In the case of aged joints, in addition there are potential effects due to swelling and differential stresses, secondary bond failure and molecular chain scission within the polymer, all provoked by the presence of water.     

国外聚甲醛生产技术现状与发展

综述了国外主要甲醛生产厂商的工艺技术，树脂生产技术的发展和品种开发情况。     

工科背景高等院校开展统计教育的研究——以浙江科技学院为例

快速发展中的工科背景高等院校在统计教育上存在有待改进的地方。以浙江科技学院为例,为培养具有深厚统计学背景的应用型复合人才,在统计教育上作了一些探索：定位于浙江中小企业对统计知识的实际需求;选择注重实际应用的国外经典教材;在教学中注重学生的参与;在实践中培养学生运用统计学知识和统计工具如统计软件的能力。     

Milled fibre reinforced epoxy resin — an engineering polymer composite

A milled fibre reinforced epoxy resin composite (MFRE) has been developed for low temperature use. It is resistant to fracture at temperatures down to at least 77 K in direct contact with liquefied gases. It can be used as an adhesive, a gap-filling mastic or a moulding compound for difficult cryogenic applications. The characteristics of the material and some applications are described.     

阳离子交换树脂催化合成十三碳二元酸二乙酯

以强酸性阳离子交换树脂为催化剂,十三碳二元酸与乙醇为原料合成十三碳二元酸二乙酯,考察了影响反应的因素。结果表明:醇酸摩尔比为4∶1,催化剂用量为酸质量的2%,在3分子筛脱水的情况下反应7 h,酯化率达98.4%,并且催化剂可重复使用3次。