A new oxyapatite red phosphor Eu3+-doped Ca3Y7(BO4)(SiO4)5O: Synthesis,structure and luminescence properties

A series of new oxyapatite red phosphors Ca₃Y₇(BO₄)(SiO₄)₅O doped with different concentrations of Eu³⁺ were successfully synthesized by high temperature solid state method. The X-ray diffraction (XRD) Rietveld refinement results show that the structure of the phosphor belongs to space group P6₃/m and Eu³⁺ ion replaces Y³⁺ ion. The emission spectrum consists of the characteristic emission peaks corresponding to Eu³⁺ under the excitation of 274 nm and the dominant emission peak is at 614 nm (⁵D₀→⁷F₂ of Eu³⁺). The concentration quenching effect occurs and the optimized Eu³⁺ concentration is 4.0 mol%. The energy level diagram for luminous mechanism is also given and the non-radiative energy transfer mechanism between Eu³⁺ is mainly exchange interaction. The CIE coordinate is close to the ideal red light and the color purity is higher than 99.79%. Moreover, the phosphor exhibits moderate thermal stability because the photoluminescence intensity at 423 K is still maintained at higher than 78.97% of that at room temperature. The internal quantum efficiency of Ca₃Y₇(BO₄)(SiO₄)₅O:4.0 mol%Eu³⁺ phosphor is 58.2%. A red light emitting diode (LED) device based on it can emit bright red light. The CCT values of the device are basically unchanged when driven by various bias current. The results show that Ca₃Y₇(BO₄)(SiO₄)₅O:Eu³⁺ is a new type of oxyapatite red fluorescent material with good comprehensive performances.     

锰对低铬白口铸铁组织及硬度的影响

系统研究了Ｍｎ对水平连铸低铬白口铸铁铸态及正火态组织和硬度的影响。结果表明，Ｍｎ＞２．０％之后对组织有较大影响，由于出现（Ｍ＋Ａ）组成物，使基体硬度显著提高，这将大大改善了低铬白口铸铁中碳化物与基体硬度的相对关系。试验证实，Ｍｎ＞３％之后明显改善硬度分布均匀性。还讨论了使低铬锰白口铸铁具有最佳综合性能的合理含Ｍｎ量范围     

白口铸铁锻造的组织及成分条件的试验研究

试验研究了白口铸铁锻造的组织及成分条件,分析并实际验证了冲天炉熔炼的白口铸铁锻造的可行性。     

提高高铬白口铸铁磨球冲击抗力的技术关键

当高铬白口铸铁含铬量为18%～28%,Cr/C值是8￣9,铸铁的显微组织是回火马氏体 少量残余奥氏体(<5%) M7C3碳化物,则磨球具有高的冲击韧性和断裂韧性K1C,具有高的冲击抗力,表现出低的冲击剥落量。     

20CrNiMo牙轮牙爪锻造缺陷对力学性能的影响

KX-250三牙轮钻头上的牙轮牙爪可选用20CrNiMo钢锻造,但20CrNiMo牙轮牙爪在锻造过程中产生的缺陷严重影响产品的力学性能.为此对20CrNiMo牙轮牙爪进行质量跟踪,并对试样进行了力学性能的测试.结果表明：当锻造产生了白点和过热缺陷时,牙轮牙爪的力学性能明显下降,尤其是塑性指标和冲击韧度降低明显.为了防止这些缺陷的产生,还提出了一些对策,以提高牙轮牙爪的力学性能.     

An Optimization Method For Estimating Phase Compositions And Amounts In Two—Phase Nickel Base Superalloys

根据已知镍基合金成分和γ′相成分，运用分层宽容多目标优化法，分别计算了γ相成分及γ′相含量．优化测算过程的实现是通过建立使杠杆定律等式两端数值差最小和两相共格错配度最小的目标函数，并通过设置γ′相含量和基体相成分取值范围的约束条件而实现的．验证了该方法的可行性和准确性．     

GH4169缺口件多轴加载下应力应变场的有限元分析

采用GH4169缺口试件在650 ℃下进行了高温拉扭疲劳断裂试验,利用ANSYS 6 1 有限元分析软件计算试件缺口周围的应力应变场,确定出试件在各种载荷状况下的应力集中系数。计算结果表明,该有限元建模方式是合理的,为以后缺口件的寿命预测过程奠定了基础。     

粗四氯化钛除钒工艺现状及进展

论述了海绵钛和钛白生产中四氯化钛精制除钒工艺生产现状和研究进展,从技术、经济和环保角度对几种主要的除钒方法进行了综合性的评价和探讨。     

HIGHER ORDER MOMENTS OF SAMPLE AUTOCOVARIANCES AND SAMPLE AUTOCORRELATIONS FROM AN INDEPENDENT TIME SERIES

Abstract. Given length- n sampled time series, generated by an independent distributed process, in this paper we treat the problem of determining the greatest order, in n , that moments of the sample autocovariances and sample autocorrelations can attain. For the sample autocovariance moments, we achieve quite general results; but, for the autocorrelation moments, we restrict study to Gaussian white noise (normal, independent and identically distributed). Our main theorem relates to the cross-moments of the non-centred sample autocovariances, but we also establish a relation between these and the corresponding moments for the centred sample autocovariances.     

An Objective Method to Prioritize Socio‐Environmental Water Management Tradeoffs Using Multi‐Criteria Decision Analysis

Rivers provide many social and environmental services that benefit humanity. A critical role of water mangers is to prioritize water allocation options that trade off socio‐economic and hydro‐ecological benefits in rivers. Methods for multi‐criteria decision analysis (MCDA) provide a structured and systematic manner for researchers to aid in this process. In this paper, we describe a new MCDA method that prioritizes large multi‐dimensional sets of tradeoffs to support well‐informed water management in rivers. The method was developed based on an environmental flows planning study in the Goulburn‐Broken River catchment, Victoria, Australia. A combined simulation and heuristic optimization procedure was previously integrated into a hydrological catchment network model. That process resulted in a large set of viable daily water allocation schedules that traded off long‐term irrigation and hydro‐ecological benefits at the catchment outlet. We provided new guidance procedures to identify priority tradeoffs that can be used in stakeholder deliberations and catchment decision‐making. Our MCDA method included combined multi‐dimensional ordination and cluster analysis to spread the water allocation alternatives onto a two‐dimensional plane to discover alternatives with similar criteria tradeoffs. A geometric distance‐based method was performed on the full set of alternatives and on the identified clusters to rank the alternatives in accordance with minimizing the distance of the alternatives to an ideal but non‐feasible reference point in multi‐dimensional space. This method complements the use of elicitation procedures when water manager or other stakeholder interaction is not an option or when objectivity is desired. Copyright © 2016 John Wiley & Sons, Ltd.