中国冷库的现状与发展趋势

本文从的设计建造、制冷工艺和管理维护这三个方面，介绍了近三年来中国冷库的现状，说明中国冷库正朝着灵活、自动化、节能和环保的方向进一步发展。     

Stickiness, Functionality, and Microstructure of Food Powders

Three major aspects of food powder are described and discussed. Stickiness is one issue that can cause production and product handling difficulties. Stickiness has been interpreted in a number of ways and thus measured differently. Functionality of the primary (single) particles or agglomerated powders is of practical interest to the consumers. The desired quality will have to be matched or exceeded by the powder manufacturers. Finally, microstructure provides a key linkage between the production and the functionality. Its formation has impacts on both the stickiness and functionality.     

乳化炸药混装车水孔爆破的优越性

该文分析了应用袋装炸药装填水孔爆破产生拒爆、"冲天炮"、根底偏高和爆破效果差等问题,然而应用乳化炸药混装车装填水孔可以解决这些问题,并且爆破后具有根底平整、大块率低、毒气少和综合效益高等优点.以三峡永久船闸旁侧泄水箱涵工程和江苏田湾核电站工程为例进行了分析.     

拟动力实验中的数值积分方法

拟动力实验方法是目前最新的抗震实验方法，它克服了振动台实验中承载力不足、拟静力实验中无法真实模拟地震过程的缺点．本文详细论述了拟动力实验中的数值积分方法，其中包括：显式方法，隐式方法以及采用于结构技术时所需的特殊教值积分方法，并对这些方法的适用范围作了介绍．     

The three-dimensional architecture of the mitotic spindle,analyzed by confocal fluorescence and electron microscopy

Fluorescence microscopy techniques have become important tools in mitosis research. The well-known disadvantages of fluorescence microscopy, rapid bleaching, phototoxicity and out-of-focus contributions blurring the in-focus image are obstacles which still need to be overcome. Confocal fluorescence microscopy has the potential to improve our capabilities of analyzing cells, because of its excellent depth-discrimination and image processing power. We have been using a confocal fluorescence microscope for the study of the mechanism of poleward chromosome movement, and report here (1) a cell preparation technique, which allows labeling of fixation sensitive spindle antigens with acceptable microtubule preservation; (2) the use of image processing methods to represent the spatial distribution of various labeled elements in pseudocolour; (3) a novel immunoelectron microscopic labeling method for microtubules, which allows the visualization of their distribution in semithin sections at low magnification; and (4) a first attempt to study microtubule dynamics with a confocal fluorescence microscope in living cells, microinjected with rhodamine labeled tubulin. Our experience indicates that confocal fluorescence microscopy provides real advantages for the study of spatial colocalization of antigens in the mitotic spindle. It does not, however, overcome the basic limits of resolution of the light microscope. Therefore, it has been necessary to use an electron microscopic method. Our preliminary results with living cells show that it is possible to visualize the entire microtubule network in stereo, but that the sensitivity of the instrument is still too low to perform dynamic time studies. It will be worthwhile to further develop this new type of optical instrumentation and explore its usefulness on both fixed and living cells.     

FODA — the formal specification of ODA document structures and its use as a basis for conformance testing

The Office Document Architecture (ODA) is an International Standard which is developed by TC 97/sc 18 of the International Organization for Standardization (ISO) in close collaboration with CCITT's Study Group VIII and with ECMA. This paper describes the current state of a formal specification of the ODA document structures by mathematical means and its use for conformance specification and conformance testing.     

Preparation and adsorption behavior of a cellulose‐based,mixed‐mode adsorbent with a benzylamine ligand for expanded bed applications

A novel mixed‐mode expanded bed adsorbent with anion‐exchange properties was explored with benzylamine as the functional ligand. The cellulose composite matrix, densified with stainless steel powder, was prepared with the method of water‐in‐oil suspension thermal regeneration. High activation levels of the cellulose matrix were obtained with allyl bromide because of the relative inertness of the allyl group under the conditions of the activation reaction. After the formation of the bromohydrin with N‐bromosuccinimide and coupling with benzylamine, the activated matrix was derived to function as a mixed‐mode adsorbent containing both hydrophobic and ionic groups. The protein adsorption capacity was investigated with bovine serum albumin as a model protein. The results indicated that the prepared adsorbent could bind bovine serum albumin with a high adsorption capacity, and it showed salt tolerance. Effective desorption was achieved by a pH adjustment across the isoelectric point of the protein. The interactions between the cell and adsorbent were studied, and the bioadhesion was shielded by the adjustment of the salt concentration above 0.1M. Stable fluidization in the expanded bed was obtained even in a 2% (dry weight) yeast suspension. The direct capture of target proteins from a biomass‐containing feedstock without extra dilution steps could be expected with the mixed‐mode adsorbent prepared in this work, and this would be especially appropriate for expanded bed adsorption applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Min-Max MPC based on a computationally efficient upper bound of the worst case cost

Min-Max MPC (MMMPC) controllers [P.J. Campo, M. Morari, Robust model predictive control, in: Proc. American Control Conference, June 10–12, 1987, pp. 1021–1026] suffer from a great computational burden which limits their applicability in the industry. Sometimes upper bounds of the worst possible case of a performance index have been used to reduce the computational burden. This paper proposes a computationally efficient MMMPC control strategy in which the worst case cost is approximated by an upper bound based on a diagonalization scheme. The upper bound can be computed with O(n³) operations and using only simple matrix operations. This implies that the algorithm can be coded easily even in non-mathematical oriented programming languages such as those found in industrial embedded control hardware. A simulation example is given in the paper.     

Impact of QOS requirements on video coding for ATM networks

The broadband integrated services digital networks (B-ISDN) based on asynchronous transfer mode (ATM) technology can support a wide range of applications such as voice, video, still images, and data. Compression techniques increase the effective bandwidth utilization, but the bursty and asynchronous nature of the traffic can still lead to congestion in the network, and degradation of image quality and quality of service (QOS). Some of the features to provide better coding schemes for ATM networks are layered coding, resynchronization, buffering, interleaved schemes, constrained bit rate due to buffers, encapsulation with the RTP or AAL1 for clock recovery, lapped transforms, motion compensation, and optimal bit allocation for coders based on wavelet transforms. We review various techniques forimage and video coding such as transforms, motion compensation, vector quantization, and subband coding. We outline the impact of the cell loss ratio (CLR), delay and cell delay variation (CDV) on video coding: blocking effects, loss of frame synchronization, motion vectors, and vector quantization codewords. The open problems include tuning coding parameters to the available QOS provided by the network.