Single-mode fluorotellurite glass fiber

By multi-stage rod-in-tube fiber drawing process, a single-mode fluorotellurite glass fiber was fabricated and reported for the first time. Benefiting from chemical–physical dehydration process to remove water and OH⁻ groups, the propagation loss was decreased to 1.9 dB/m at 1550 nm and the infrared window is extended from 2.8 μm to 4.2 μm, i.e. a new kind of mid-infrared glass fiber. The fiber is with a small core of 3.52 μm in diameter to meet single-mode condition, and the effective nonlinear parameter γ was estimated to be 236.7 W⁻¹ km⁻¹ at 1550 nm by using continuous-wave self-phase modulation method. © 2015 Elsevier B.V. All rights reserved.     

Structural Studies of DNA–Cationic Lipid Complexes Confined in Lithographically Patterned Microchannel Arrays

We have used lithographically patterned microchannel arrays with channel widths ranging from 1 to 20 m, fabricated using electron beam lithography and reactive ion etching, in structural studies of DNA–cationic lipid complexes in confinement. Various techniques have been developed for loading these DNA–membrane complexes into the microchannels or to form the complexes in situ by sequentially depositing DNA and lipid solutions into the microchannels. Optical microscopy studies indicate that such complex formation is strongly influenced by the periodic channel structure even at channel widths much larger than the persistent length of the DNA molecules. Preliminary x-ray diffraction experiments conducted at Stanford Synchrotron Radiation Laboratory (SSRL) yielded only a weak signal from the lipid bilayers in the complexes. The use of a microfocused x-ray beam produced by the newly developed Bragg–Fresnel optics at a third-generation synchrotron facility may dramatically increase the signal-to-noise ratio and allow observation of orientational as well as positional ordering of DNA molecules induced by the microchannels. Structural control of the DNA–membrane complexes has a broad range of potential applications in gene probe technology and as mesoscopic biomolecular composites.     

Minimum‐variance control of astronomical adaptive optic systems with actuator dynamics under synchronous and asynchronous sampling

Adaptive optic (AO) systems are now routinely used in ground‐based telescopes to counter the effects of atmospheric turbulence. A deformable mirror (DM) generates a correction wavefront, which is subtracted from the turbulent wavefront using measurements of the residual phase provided by a wavefront sensor (WFS). Minimizing the variance of the residual phase defines a sampled data control problem combining a continuous time minimum‐variance (MV) performance criterion with a discrete‐time controller. For a fairly general class of linear time‐invariant DM and turbulence WFS models, this control problem can be transformed into an equivalent discrete‐time LQ optimization problem involving a set of (discrete‐time) control‐sufficient statistics of the incoming continuous‐time turbulence. This paper shows how to constructively solve this MV problem in the presence of DM's dynamics, starting from continuous‐time models of DM and turbulence. This result is extended to the case of asynchronous DM/WFS sampling. An illustrative application to optimal control of tip‐tilt turbulent modes for the European extremely large telescope in the presence of first‐order DM's dynamics is presented. Copyright © 2010 John Wiley & Sons, Ltd.     

SOM‐based projection module for mobile displays

Abstract— The development of a compact, efficient VGA projection module to be embedded in mobile devices is reported. The design incorporates laser/laser diode (LD) light sources, Schlieren optics, and a one‐dimensional diffractive spatial optical modulator (SOM). During development, the optical parameters were determined and the relationships between the parameters to optimize the optical specifications were derived. The resulting optimized specifications enable us to manufacture two types of optical modu les as compact as 13 cc and with as little as 10% speckle contrast ratio.     

基于电磁力的FBG电流传感器研究

利用通电螺线管与永磁铁之间的作用力,提出了一种测量电流的方法.光纤Bragg光栅(FBG)在永磁铁的牵引下发生轴向应变,引起Bragg中心波长的漂移,通过解调中心波长漂移量对电流进行测量.实验中采取多匝数螺线管和小电流来模拟大电流,对0-3A的直流电流进行了测量.实验结果表明:中心波长漂移量与电流有很好的线性关系,线性...     

Utility of an image-based canopy reflectance modeling tool for remote estimation of LAI and leaf chlorophyll content at the field scale

This paper presents a physically-based approach for estimating critical variables describing land surface vegetation canopies, relying on remotely sensed data that can be acquired from operational satellite sensors. The REGularized canopy reFLECtance (REGFLEC) modeling tool couples leaf optics (PROSPECT), canopy reflectance (ACRM), and atmospheric radiative transfer (6SV1) model components, facilitating the direct use of at-sensor radiances in green, red and near-infrared wavelengths for the inverse retrieval of leaf chlorophyll content (C_ab) and total one-sided leaf area per unit ground area (LAI). The inversion of the canopy reflectance model is constrained by assuming limited variability of leaf structure, vegetation clumping, and leaf inclination angle within a given crop field and by exploiting the added radiometric information content of pixels belonging to the same field. A look-up-table with a suite of pre-computed spectral reflectance relationships, each a function of canopy characteristics, soil background effects and external conditions, is accessed for fast pixel-wise biophysical parameter retrievals. Using 1 m resolution aircraft and 10 m resolution SPOT-5 imagery, REGFLEC effectuated robust biophysical parameter retrievals for a corn field characterized by a wide range in leaf chlorophyll levels and intermixed green and senescent leaf material. Validation against in-situ observations yielded relative root-mean-square deviations (RMSD) on the order of 10% for the 1 m resolution LAI (RMSD = 0.25) and C_ab (RMSD = 4.4 μg cm^− 2) estimates, due in part to an efficient correction for background influences. LAI and C_ab retrieval accuracies at the SPOT 10 m resolution were characterized by relative RMSDs of 13% (0.3) and 17% (7.1 μg cm^− 2), respectively, and the overall intra-field pattern in LAI and C_ab was well established at this resolution. The developed method has utility in agricultural fields characterized by widely varying distributions of model variables and holds promise as a valuable operational tool for precision crop management. Work is currently in progress to extend REGFLEC to regional scales.     

Oscillatory Metastability in Optical Network Synchronizer Circuits

Synchronization of signal packets is required in networks in order to route the packets. Due to changes in the interarrival times of the packets the inputs to the routing circuits may exhibit oscillatory metastability. Oscillatory metastability can be eliminated in optical circuits by the addition of logic signal stretch. This can be done because the propagation time of optics can be precisely controlled. An algorithm for inserting logic signal stretch to eliminate oscillatory metastability is presented herein.     

纳米分辨近场光学显微成象技术现状

介绍了纳米分辨近场光学显微成象技术现状,近场光学显微成象技术大体可分为小孔扫描近场光学显微镜（Ａ－ＳＮＯＭ）、无孔径用射扫描近光学显微镜（Ｓ－ＳＮＯＭ）和光子扫描隧道显微镜（ＰＳＴＭ）三种基本类型,除介绍这三类近场光学显微镜简要成象原理、现状和各自特点外,还重点介绍了大连理工大学纳米成象技术研究组ＰＳＴＭ的研究进展,即ＰＳＴＭ消假象数值模拟和实验研究结果,其实验空间分辨首次达到２．８ｎｍ线扩展函数