一步法合成松香改性酚醛树脂

探讨了一步法合成松香改性酚醛树脂的反应机理，确定了最佳原料组成及合成工艺，由此制备出高溶解粘度和矿油容纳度的松香改性酚醛树脂，是一种性能优异的高级胶印油墨连接料     

天线方向图的复射线仿真

根据复射线理论，利用复源点高斯波束场来模拟天线的远场方向图。本文提出三种模拟方法，即主瓣匹配法，峰值匹配法和逐点匹配法，给出了多种方向图的仿真结果。数值分析和优化结果表明，复射线峰值匹配法是一种精确实用的天线方向图仿真技术。     

浅谈移动通信基站天线系统设计

对基站天线的基本原理、天线选型、天线参数设置、天线安装等方面进行了描述，对天线下倾角、分集距离等进行了重点讨论。     

The sinuous antenna-A dual polarized feed for reflector-based searching systems

The sinuous antennas have a numerous applications in military and civil systems such as direction finding systems and reflector feeds due to their superior broadband characteristics and simultaneous polarization capability. In this paper, design, construction and measurements of planar sinuous antennas are investigated for 1–5 GHz frequency range. Feeding sections of this antenna are realized by using microstrip tapered baluns. We have determined the microstrip tapered balun dimensions using Ansoft HFSS-simulation program. The performances of the manufactured antenna are measured using HP vector network analyzer. Polarization patterns and return loss characteristics of the designed antenna that have been measured in anechoic chamber, are presented.     

宽带被动导引头天线系统性能分析

详细讨论了宽带被动导引头中的关键部件－超宽频带天线的性能，并在此基础上分析了三种具备大视角特性的被动测角方法。由于宽带天线没有确定的相位中心，因此不能采用通常的振幅和差式单脉冲法进行宽频带测角。本文提出的波束运算网络可用于一个宽带螺旋天线同时得到两个交叉波束的振幅－振幅式单脉冲系统中。此外，对比幅相干测向法中的测角模糊问题也进行了研究。     

V型天线的行波加载公式

本文研究了ｖ型天线上电流分布与阻抗加载的关系，导出了支持天线上行波电流的阻抗加载公式。讨论了天线张角、振子半径以及振子长度与加载量的关系和规律，说明了加载Ｖ型天线的宽带特性。文中还计算了在高斯脉冲激励下，不同加载量的天线上瞬态电流的分布，由此可以表明所导加载公式的正确性与重要性。     

Intelligent control of doubly‐fed induction generator systems using PIDNNs

An intelligent control for a stand‐alone doubly‐fed induction generator (DFIG) system using a proportional‐integral‐derivative neural network (PIDNN) is proposed in this study. This system can be applied as a stand‐alone power supply system or as the emergency power system when the electricity grid fails for all sub‐synchronous, synchronous, and super‐synchronous conditions. The rotor side converter is controlled using field‐oriented control to produce 3‐phase stator voltages with constant magnitude and frequency at different rotor speeds. Moreover, the grid side converter, which is also controlled using field‐oriented control, is primarily implemented to maintain the magnitude of the DC‐link voltage. Furthermore, the intelligent PIDNN controller is proposed for both the rotor and grid side converters to improve the transient and steady‐state responses of the DFIG system for different operating conditions. Both the network structure and online learning algorithm are introduced in detail. Finally, the feasibility of the proposed control scheme is verified through experimentation. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

自适应天线匹配低频RFID读写器设计

在工业现场、野外甚至水中,RFID读写器天线电特性参数将发生改变,导致阻抗不匹配和发射功率大幅下降,最终降低RFID读写器读写范围和效率。为了解决这个问题,构建了一个自适应天线匹配RFID读写器系统,该系统在基本读写器系统上增加了自适应电容匹配矩阵、正弦波均方根检测和模/数转换器。该系统通过依次配置电容矩阵,扫描天线发射信号幅度,检测出最佳匹配电容,实现天线阻抗的最佳匹配。通过实验表明,在一定范围内该系统能够实现自动的阻抗匹配,获取最大发射功率。     

基于复合左右手传输线结构的新型微带天线

基于复合左右手传输线结构的零阶谐振理论,提出了一种新型双层结构的微带天线,仿真结果表明该天线具有比单层微带天线更小的尺寸。研究了天线各结构参数对天线特性的影响,并对各参数进行了优化仿真。仿真结果表明该天线具有全向辐射特性,与传统微带天线相比,该天线具有体积小的特点。     

OFDM快速频偏估计方法

提出一种基于前导符号为L等分结构的OFDM快速频偏估计的新方法,该方法只需一个OFDM符号作为前导符号,数据开销较小.接收端先用相关求相角的方法完成细频偏估计,再对经过细频偏补偿后的前导数据进行符号重构,然后对重构符号采用L点FFT运算,通过寻找频域信号峰值,对剩余频偏进行估计,从而完成粗频偏估计.为进一步降低系统的计算开销,采用了多级判决方式.计算机仿真表明,该方案具有计算复杂度低,估计性能较高的优点.