混合溶剂对Ru(Ⅳ)萃取的研究

一、前言 在一定浓度盐酸介质中,Ru(Ⅳ)以RuCl_6~(2-)络阴离子状态存在,可被C类溶剂TOA(三辛胺)以离子缔合机制定量地萃入有机相。由实验得到在相同条件下,TOA对Ru(Ⅳ)的萃取率随稀释剂介电常数的增加而下降。     

低温裂纹张开位移预测方法的讨论

把低温影响下的COD试验数据用灰色理论中的累加方法进行累加，可以使一组没有规律的数据成为一条光滑的曲线．然后利用人工神经网络和自适应模糊推理系统两种方法进行预测，算例的结果表明用一次累加后的数列预测精度较高。     

低碳钢显微结构的EBSD表征

近年来,新开发的电子背散射衍射技术将多晶材料的显微组织、微区成分与结晶学数据分析联系起来,能对晶界类型、取向、位向差和结构及其分布进行观察、统计测定和定量分析,从而建立了晶界结构、取向和织构等与多晶材料性能的定量和半定量关系,成为现代材料研究的重要实验技术。笔者结合低碳钢生产中的一些实际问题,扼要介绍了电子背散射衍射技术中的晶体取向图在多晶材料显微结构表征中的应用。     

Intermediate temperature solid oxide fuel cell based on fully integrated plasma-sprayed components

This work addresses the fabrication of membrane-type solid oxide fuel cells (SOFCs) operating at medium temperatures, where all components are fabricated by plasma spray technology, and the evaluation of the performance of the SOFC single unit in a temperature range of 500 to 800 °C. Single cells composed of LaSrMgO₃ cathodes, LaSrGaMgO₃ (LSGM) electrolytes, and Ni/yttria-stabilized zirconia anodes were fabricated in successive atmospheric plasma-spraying processes. Plasma-spraying processes have been optimized and tailored to each layer to achieve highly porous cathode and anode layers as well as high-density electrolyte layers. A major effort has been devoted to the production of the LSGM electrolyte that has a high density and is free of cracks. Electrochemical impedance spectroscopy was used to investigate the conductivity of the electrode layers, and particularly the resistance of the electrolyte layer. It revealed that the heat treatment had a great influence on the specific conductivity of the sprayed electrolyte layers and that the specific conductivity of the heat-treated layers was dramatically increased to the same magnitude as is typical for sintered LSGM pellets. The experimental results have demonstrated that the plasma-spraying process has a great potential for the integrated fabrication of medium-temperature SOFC units. The original version of this article was published as part of the ASM Proceedings, Thermal Spray 2003: Advancing the Science and Applying the Technology, International Thermal Spray Conference (Orlando, FL), May 5–8, 2003, Basil R. Marple and Christian Moreau, Ed., ASM International, 2003.     

Influence of Mn and Cu addition on the hyperfine parameters of amorphous and nanocrystalline FeCoNbB alloys

The effects of Cu and Mn addition on the hyperfine field of FeCoNbB HITPERM alloys are discussed from Mössbauer spectrometry. Amorphous and nanocrystalline samples at different stages of the nanocrystallization were studied. The effect of Cu addition correlates with the observed refinement of the microstructure. Mn mainly partitions to the matrix, decreasing the average hyperfine field of the amorphous matrix, although some Mn remains in the nanocrystalline grains, presumably, in a concentration below the maximum solubility of Mn in -Fe.     

数控机床主轴位置自动测量的实现

论述了数控机床主轴的结构以及数控机床主轴位王的测量电路的设计，实现了数控机床主轴位王参数的自动化测量过程。     

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining was carried out to investigate microfracture, residual damage, and surface roughness associated with material removal and surface generation. Brittle versus plastic deformation was studied using Vickers indention and nano-indentation. To characterize the abrasive machining response, the 6H-SiC (0001) substrates were ground using diamond wheels with grit sizes of 25, 15 and 7 μm, and then polished with diamond suspensions of 3 and 0.05 μm. It is found that in indentation, there was a scale effect for brittle versus plastic deformation in 6H-SiC substrates. Also, in grinding, the scales of fracture and surface roughness of the substrates decreased with a decrease in diamond grit size. However, in polishing, a reduction in grit size of diamond suspensions gave no significant improvement in surface roughness. Furthermore, the results showed that fracture-free 6H-SiC (0001) surfaces were generated in polishing with the existence of the residual crystal defects, which were associated with the origin of defects in single crystal growth.     

高温钎料PdCu-Ti在氧化铝陶瓷上的润湿性及界面反应

本文采用座滴法试验研究了合金系统ＰｄＣｕ－Ｔｉ在Ａｌ２Ｏ３上润湿性的变化规律，探讨了界面冶金及结合等行为，运用热力学理论对结果进行了分析，随Ｔｉ含量的增加及Ｐｄ含量的减少润湿角逐渐降低，Ｔｉ的加入使界面发生了一个双重变化；液相侧富氧，钛吸收层的生成及随后的固相侧氧化钛的生成，只有界面上生成一氧化钛，才能有较好的润湿行为和较强的结合力。     

天然沸石与纳滤组合工艺处理铜突发污染的应用

纳滤工艺被广泛应用于分散式饮用水深度处理,能解决饮用水苦咸化,盐碱化或微污染等常规水处理工艺无法规避的用水风险,在长时间运行过程中还能有效应对重金属等突发污染风险。但重金属污染易加重纳滤膜污染,需要增设预处理装置加以缓冲,实现纳滤装置的长久稳定运行。而天然沸石具有良好的筛分性能和吸附性能,能够有效缓冲重金属对纳滤装置的冲击。试验以重金属铜为例,证明水中铜离子会造成纳滤不可逆污染比例增加,不利于系统稳定运行;天然沸石对铜离子有很好的吸附效果,静态吸附试验表明天然沸石对水中铜离子的最大吸附量为3.03 mg/g,通过正交试验合理设计吸附预处理,能够有效为纳滤工艺提供安全进水,保证纳滤进水铜离子浓度低于10 mg/L。实践工艺中,吸附预处理能有效缓解纳滤膜不可逆污染,而且吸附-纳滤组合工艺对铜离子及部分其他重金属离子表现出良好的处理效果。     

饮用水中天然有机物的分析与表征方法

天然有机物(NOM)是一类分布广泛、成分复杂的有机混合物,可严重影响饮用水的处理效率,并可能对出水水质产生严重的不利影响。因此,为了改进和优化饮用水的处理过程,在研究和实际应用阶段对NOM进行表征和定量以了解其结构特性和反应性具有重要意义。文中先对NOM的富集方法进行了介绍,接着梳理了不同分离方法的依据及作用,最后总结了各类表征方法的原理及应用,以期有助于对NOM和饮用水处理的深入研究。