Computation of optimum reliability acceptance sampling plans in presence of hybrid censoring

The decision regarding acceptance or rejection of a lot of products may be considered through variables acceptance sampling plans based on suitable quality characteristics. A variables sampling plan to determine the acceptability of a lot of products based on the lifetime of the products is called reliability acceptance sampling plan (RASP). This work considers the determination of optimum RASP under cost constraint in the framework of hybrid censoring. Weibull lifetime models are considered for illustrations; however, the proposed methodology can be easily extended to any location-scale family of distributions. The proposed method is based on asymptotic results of the estimators of parameters of lifetime distribution. Hence, a Monte Carlo simulation study is conducted in order to show that the sampling plans meet the specified risks for finite sample size.     

基于混合遗传算法的去耦电容网络设计

结合基于目标阻抗的设计方法,将混合遗传算法应用于PDN(电源分配网络)的去耦电容网络设计,对所需去耦电容器的种类和数目进行优化计算,同时与标准遗传算法和传统设计方法进行对比,借助Cadence电源完整性仿真工具验证设计结果的有效性和合理性。避免了传统设计需要借助EDA工具进行反复修改和验证的繁琐过程,同时减少了设计冗余,节省了PCB布局布线空间,为高频电路的PDN设计提供参考。     

光纤陀螺随机误差特性ThêoH辨识

随机误差特性分析是光纤陀螺进入工程应用阶段的关键技术.针对Allan方差、总方差、Thêo1 (Theoretical variance #1)等分析方法的不足,以Thêo1为基础,通过偏差消除获得ThêoBR(Bias-removed ver?sion of Thêo1),并将其与Allan方差合成,得到光纤陀螺随机误差特性分析的ThêoH(Hybrid-ThêoBR)法.通过计算重叠Allan方差、总方差、Thêo1以及ThêoH的等效自由度,结合仿真和实测信号的随机误差特性分析实验,证明ThêoH法不仅提高了Allan方差估计的置信度,且解决了Thêo1估计有偏的问题,表明了该方法是目前能够有效辨识光纤陀螺随机误差特性的最佳方法.     

一种基于混合社区的移动机会网络数据传输机制

由人携带或使用智能设备组成的移动机会网络采用"存储-携带-转发"的通信机制,通过中继转发来实现节点之间的数据传递。为了改善网络性能,往往需要借助节点的社会属性来进行中继选择和制定转发策略。然而,在已有的传输机制中,往往只是利用节点的部分社会属性,不能完全反映出节点之间的社会关系。为此,提出了一种新的基于混合社区的数据传输机制,并给出了混合社区的内涵、混合社区的构建方法和基于混合社区的数据传输算法。基于几种真实轨迹数据集的实验结果表明,与已有的几种经典路由算法相比,该方法传输成功率较高,传输延迟较短,性能更好。     

A Lyapunov‐based small‐gain approach on design of triggering conditions in event‐triggered control systems

This paper studies a Lyapunov‐based small‐gain approach on design of triggering conditions in event‐triggered control systems. The event‐triggered control closed‐loop system is formulated as a hybrid system model. Firstly, by viewing the event‐triggered control closed‐loop system as a feedback connection of two smaller hybrid subsystems, the Lyapunov‐based small‐gain theorems for hybrid systems are applied to design triggering conditions. Then, a new class of triggering condition, the safe, adjustable‐type triggering condition, is proposed to tune the parameters of triggering conditions by practical regulations. This is conducive to break the restriction of the conservation of theoretical results and improve the practicability of event‐triggered control strategy. Finally, a numerical example is given to illustrate the efficiency and the feasibility of the proposed results. Copyright © 2015 John Wiley & Sons, Ltd.     

基于改进粒子群优化算法的火电厂机组负荷分配

以坑口电厂厂级监控信息系统的机组负荷在线优化分配功能模块为应用背景,针对模块所运用的基本粒子群优化算法在优化过程中容易陷入局部收敛、收敛速度慢的缺点,提出一种基于惯性权重非线性减小策略的改进粒子群优化算法,使惯性权重呈对数减小;测试函数仿真结果表明,改进粒子群优化算法在收敛速度和寻优精度方面,优化性能均优于基本粒子群优化算法;通过MATLAB与Visual C++混合编程,开发了机组负荷在线优化分配功能模块,提高了算法的计算效率和工程应用价值。     

基于小波变换的卡尔曼滤波动力电池SOC估算

混合动力电动汽车的动力电池和电池管理系统的工程实际应用环境是非常恶劣的,导致信号采样过程中包含大量的系统噪声和测量噪声.因此,提出一种基于小波变换的卡尔曼滤波动力电池SOC估算方法,通过在一系列充放电实验所建立的动力电池系统模型上,利用小波变换自相似过程的去相关作用和多尺度多分辨的特性对噪声进行抑制,实时对测量信号多尺度滤波分解,再采用卡尔曼滤波的迭代递推的线性无偏最小方差估计特性对电池SOC进行估算.实验结果表明,提出的基于小波变换的卡尔曼滤波SOC估算方法效果优于标准的卡尔曼滤波算法,在实际工况中,具有较强的适应性.     

基于离散粒子群算法全局QoS最优的Web服务选择

Web服务选择是Web服务组合中重要问题,也是一个NP难问题,使用离散粒子群算法对该问题进行建模求解并针对粒子群算法后期容易陷入局部最优进行改进,借鉴遗传算法中杂交变异的思想对算法迭代后期的一部分粒子进行杂交变异,实验仿真证明,由于杂交变异的引入,能够求得Web服务组合全局QoS更优的解。     

Design of hexa‐band planar inverted‐F antenna using hybrid BSO‐NM algorithm for mobile phone communications

This article presents a new design of multiband planar inverted‐F antenna with slotted ground plane and S‐etched slot on the radiation patch. The proposed antenna is optimized using an efficient global hybrid optimization method combining bacterial swarm optimization and Nelder‐Mead (BSO‐NM) algorithm to cover a very important six service bands including GSM900, GPS1575, DCS1800, PCS1900, ISM2450, and 4G5000 MHz with enhanced bandwidths. The BSO‐NM algorithm in Matlab code is linked to the CST Microwave studio software to simulate the antenna. To validate the results, the antenna is analyzed using the finite difference time domain (FDTD) method. A good agreement is achieved between the results of EM simulation and that produced from the FDTD method. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.