Novel miniature integrated optical goniometers

A new principle and arrangement for directly determining the angle of incidence of an optical beam on an object are proposed and demonstrated. The novelty of the approach lies in the realization of a ‘smart object’, which extracts a portion of the incident beam's power into an optical waveguide attached to the object's surface or embedded in its body for converting the angle of incidence into the position of a guided beam with finite lateral extent. This ‘integrated optical light pointer’ beam is accomplished by means of creating additional degrees of freedom on the target in two different ways. While a first type is based on introducing spatial variations of the waveguide thickness, a second type makes use of a chirp of the grating periodicity. The feasibility for practical applications has been experimentally demonstrated by a direct comparison with a commercial high-resolution encoder, resulting in an r.m.s. error of <30′'. Measurements have been performed for chips fabricated based on replicated polycarbonate substrates and with no external optics, showing the great potential of this approach for realizing low-cost yet high-performance miniature goniometers.     

聚腈分子的飞秒时间分辨光克尔效应

本文利用飞秒时间分辩光克尔效应，对主链为Ｃ＝Ｎ结构的两种共轭聚腈高分子的溶液和薄膜进行研究，所测得的时间分辨光克尔信号均表现为超快响应。     

掺杂染料的向列相液晶微粒材料的非线性光学研究

对布满液晶微粒的聚合物(PDLC)进行了简并四波混频及光学双稳态的研究,并在文中对相关的PDLC中的分子重取向和热效应的非线性光学效应进行了讨论.     

多模光纤出射的光通过透镜后的场分布

用部分相干光理论,研究了单模激光入射的多模光纤出射的光经透镜后,在菲涅尔衍射区内场的分布。     

炭/炭复合材料抗氧化涂层厚度的光学测量

选用A,B,C,D4种炭/炭复合材料试样进行抗氧化涂层厚度的光学测量研究。其中:试样A,B孔隙度相同,均为15.85％,对其涂覆粒径分别为1μm和10μm的B_4C涂层;试样C,D孔隙度分别为13.52％和16.78％,对其均涂覆粒径为10μm的B_4C涂层。然后通过金相光学测量其涂层厚度,在抗氧化涂层厚度的计算过程中,对试样组织的内部未渗入抗氧化涂层的孔隙进行图像处理。结果表明:当试样孔隙度相同时,涂层材料粒径越小,其涂层越厚;当抗氧化涂层材料粒径相同时,试样孔隙度越大,涂层越厚。     

Optical measurements of thermal diffusivity of a material

The measurement of thermal diffusivity of a material (in particular, a thin film) is important for various reasons, e.g., to predict the heat transfer in the solid subjected to a thermal process, to monitor surface composition or morphology, or to detect invisible subsurface defects like delaminations. This measurement can be done in a noncontact manner using various photothermal methods. Such methods typically involve pulsed heating of the surface by small amounts using a laser source; the decay of the surface temperature after this pulsed photothermal heating is then probed to provide the thermal diffusivity. Various probing methods have been developed in the literature, including the probing of reflection, refraction, and diffraction from the pulsed heated area, infrared thermal radiometry, and surface deformation. This paper provides an overview of such techniques and some examples of their applications.     

光外差系统噪声等效功率的一种测量方法

本文介绍了利用工作于Bragg衍射的Ge晶体声光调制器作为外差系统中的频移器来测量外差系统的噪声等效功率(NEP)的方法。该方法具有测试系统简单、信号光功率、偏频可调的优点。实验测试与理论分析吻合。     

石英晶体监控法镀制高精度光学薄膜

讨论了石英晶体监控法在光学薄膜镀制过程中的应用原理。通过与常规的光学监控法镀制的膜层相比较．证实了石英晶体监控法有助于提高光学薄膜的光学品质。试验表明所镀膜层的光学性能优异，在光通信和激光器等领域具有广阔的应用前景。     

认真创建服务型企业拓展老水电厂发展空间——湖北省白莲河水力发电厂发展问题的思考

根据对白莲河电厂历史的与现状的分析,提出该厂应当由生产型向服务型转变,在服务中提高职工素质,拓展老水电厂的发展空间.     

钱塘江光缆管穿越施工技术

钱塘江光缆管穿越长度2454.15m,穿越深度为32m,穿越中采用了多项新技术、新工艺、新方法。文章介绍了导向孔对穿技术、套管技术、水下磁场电缆铺设技术、长距离泥浆回流技术、长距离穿越钻杆组合技术在钱塘江光缆管穿越施工中的应用。